References
- S. Yoo and D. Choi, "Development of a new on-line state estimation method in PEMFC using parameter estimation", Vol. 27, No. 1, 2016, pp. 36-41. https://doi.org/10.7316/KHNES.2016.27.1.036
- W. Y. Lee, G. G. Park, Y. J. Sohn, S. G. Kim, and M. Kim, "Fault detection and diagnosis methods for polymer electrolyte fuel cell system", Korean hydrogen and new energy society, Vol. 28, No. 3, 2017, pp. 252-272.
- MOTIE, "New & Renewable Energy White Paper", 2016.
- Y. Wang, K. S. Chen, J. Mishler, S. C. Cho, and X. C. Adroher, "A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research", Applied Energy, Vol. 88, 2011, pp. 981-1007. https://doi.org/10.1016/j.apenergy.2010.09.030
- M. Song and K. Kim, "Numerical study on flow distribution in PEMFC with metal foam bipolar plate", Korean hydrogen and new energy society, Vol. 27, No. 1, 2016, pp. 29-35. https://doi.org/10.7316/KHNES.2016.27.1.029
- C. A. Cottrell, S. E. Grasman, M. Thomas, K. B. Martin, and J. W. Sheffield, "Strategies for stationary and portable fuel cell markets", Journal of Hydrogen Energy, Vol. 88, 2011, pp. 981-1007.
- T. M. I. Mahlia and P. L. Chan, "Life cycle cost analysis of fuel cell based cogeneration system for residential application in Malaysia", Renewable and Sustainable Energy Reviews, Vol. 15, 2011, pp. 416-426. https://doi.org/10.1016/j.rser.2010.07.041
- Nagata, "Development of BOP for 1kW Fuel Cell Systems", Toshiba Report, 2006.
- G. R. Choi and C. M. Jang, "Internal flow analysis of a fuel pressurized blower for fuel cell system", Korean Society for New & Renewable Energy, Vol. 7, No. 3, 2011, pp. 29-35.
- K. Kim, D. Lee, J. Lee, E. Kim, I. Kim, Y. Kim, and H. Shin, "A study on the worst stress condition test evaluation of blower for small stationary fuel cell system", Journal of the Korean Institute of Gas, Vol. 16, 2012, pp. 34-40. https://doi.org/10.7842/kigas.2012.16.6.34
- S. Lee and K. H. Kim, "Method of A-weighted sound pressure level measurement for fans, blowers and compressors", KS B, 2012.