참고문헌
- J. H. Ahn, S. Y. Yoon, T. S. Kim, "Performance comparison of molten carbonate fuel cell hybrid systems minimizing carbon dioxide emissions", Trans. of the Korean Hybrogen and New Energy Society, Vol. 28, Vo.1, 2017, pp. 30-39. https://doi.org/10.7316/KHNES.2017.28.1.30
- Y. Yi, S. J. Shin, S. J. Park, M. S. Kim, H. J. Kim, J. H. Kim, I. H. Kim, and Y. S. Kim, "Long term operation and improvement reliability for SOFC system", Trans. of Korean Hydrogen and New Energy Society, Vol. 28, No. 5, 2017, pp. 502-511. https://doi.org/10.7316/KHNES.2017.28.5.502
- F. Yin, S. Ji, B. Chen, L. Zhao, H. Liu, and C. Li, "Preparation and characterization of LaFel-xMgxO3/Al2O3/FeCrAl: Catalytic properties in methane combustion", Appl. Catal. B Environ., Vol. 66, 2006, pp. 265-273. https://doi.org/10.1016/j.apcatb.2006.03.017
- J. Lee, K. Lee, S. Yu, K. Ahn, and S. Kang, "Numerical Analysis of Steam-methane Reforming Reaction for Hydrogen Generation using Catalytic Combustion", Trans. of the Korean Hydrogen and New Energy Society, Vol. 24, No. 2, 2013, pp. 113-120. https://doi.org/10.7316/KHNES.2013.24.2.113
- M. Mbodji, J. M. Commenge, L. Falk, D. Di Marco, F. Rossignol, L. Prost, S. Valentin, R. Joly, and P. Del-Gallo, "Steam methane reforming reaction process intensification by using a millisitructured reactor: Experimental setup and model validation for global kinetic reaction rate estimation", Chem. Eng. J., Vol. 207-208, 2012, pp. 871-884. https://doi.org/10.1016/j.cej.2012.07.117
- M. Zanfir and A. Gavriilidis, "Catalytic combustion assisted methane steam reforming in a catalytic plate reactor", Chem. Eng. Sci, Vol. 58, No. 17, 2003, pp. 3947-3960 . https://doi.org/10.1016/S0009-2509(03)00279-3
- M. J. Stutz and D. Poulikakos, "Effects of microreactor wall heat conduction on the reforming process of methane", Chem. Eng. Sci., Vol. 60, 2005, pp. 6983-6997. https://doi.org/10.1016/j.ces.2005.06.012
- C. Y. Hsueh, H. Sen Chu, W. M. Yan, G. C. Leu, and J. I. Tsai, "Three-dimensional analysis of a plate methanol steam micro-reformer and a methanol catalytic combustor with different flow channel designs", Int. J. Hydrogen Energy., Vol. 36, 2011, pp. 13575-13586. https://doi.org/10.1016/j.ijhydene.2011.07.099
- F. A. Robbins, H. Zhu, and G. S. Jackson, "Transient modeling of combined catalytic combustion/CH4 steam reforming", Catal. Today, Vol. 83, 2003, pp. 141-156. https://doi.org/10.1016/S0920-5861(03)00225-6
- M. Levent, G. Budak, and A. Karabulut, "Estimation of concentration and temperature profiles for methane-steam reforming reaction in a porous catalyst", Fuel Process. Technol., Vol. 55, 1998, pp. 251-263. https://doi.org/10.1016/S0378-3820(98)00054-X
- T. G. Ghang, H. J. Sung, S. M. Lee, K. Y. Ahn, and Y. M. Kim, "Performance comparison of intergrated reactor with steam reforming and catalytic combustion using anode off-gas for high temperature fuel cells", Trans. of the Korean Hydrogen and New Energy Society, Vol. 22, No. 6, 2011, pp. 800-809.
-
K. Hou and R. Hughes, "The kinetics of methane steam reforming over a Ni/
${\alpha}$ -Al2Ocatalystm", Chem. Eng. J., Vol. 82, 2001, pp. 311-328. https://doi.org/10.1016/S1385-8947(00)00367-3 - S. M. Baek, J. H. Kang, K. J. Lee, and J. H. Nam, "A numerical study of the effectiveness factors of nickel catalyst pellects used in steam methane reforming for residential fuel cell applications", Int. J. Hydrogen Energy., Vol. 39, 2014, pp. 9180-9192. https://doi.org/10.1016/j.ijhydene.2014.04.067
- J. Xu and G. F. Froment, "Methane steam reforming, methanation and water-gas shift: I. Intrinsic kinetics", Aiche J., Vol. 35, No. 1, 1989, pp. 88-96. https://doi.org/10.1002/aic.690350109