초록
본 연구는 기존에 정의된 LDM(Local Dynamic Map)에 동적지도 정보 제공 기능을 확장한 차량LDM(V-LDM) 기술의 설계 및 개발, 성능 검증을 목적으로 한다. 이를 위해 LDM과 동적지도 정보 제공 관련 국제표준 및 관련 기술을 참고하여 차량LDM 시스템 구성을 설계하였다. 또한 자율주행을 위한 차로 수준의 정보를 갖는 정밀전자지도의 기본 구성을 제안하였고, 차량 전방의 주행 환경 정보(정적+동적 정보) 전달을 위한 메시지인 Dynamic Map (DM) 프로토콜의 기본 구조를 정의하였다. 경부고속도로의 기본구간을 대상으로 제안된 정밀전자지도와 DM프로토콜 전달 기능의 성능을 검증한 결과, 데이터 크기와 처리 수행 시간 모두 전방거리에 선형적으로 비례함을 확인하였고, 10Hz의 갱신 주기를 갖기 위해 전방 최대 250m에 해당하는 정보를 제공하는 것을 적절한 대안으로 제시하였다.
This study aims to develop the Vehicle Local Dynamic Map (V-LDM) and demonstrate its performance for providing dynamic map data efficiently to the vehicle control module. Firstly, the concept of the in-vehicle LDM has been established and then the system has been carefully designed according to the international standards. The high-precision digital map embedded in LDM has been designed to incorporate the lane-level information of road network, and the Dynamic Map protocol (DM protocol) which is a message protocol including the road data with dynamic traffic event data has been defined. The performance test of the proposed system has been conducted in the uninterrupted road section of Kyungbu expressway, showing that both of the data size and the elapsed time to finish the process are almost linearly proportional to the length of target road. Finally, it is recommended that the length of target road for DM protocol be less than 250m.