소성∙가공 (Transactions of Materials Processing)

  • 제26권6호
  • /
  • Pages.372-377
  • /
  • 2017
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

형상최적화 기법을 이용한 초고강도강판 성형용 프레스 금형의 구조설계 가이드라인

Design Guideline for Press Tool Structure of Ultra-high Strength Steel Part with Shape Optimization Technique

  • 투고 : 2017.10.26
  • 심사 : 2017.11.17
  • 발행 : 2017.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, an effective design procedure was proposed to design the rib of die structure for auto-body member with ultra-high strength steel (UHSS) having ultimate tensile strength (UTS) of 1.5 GPa. From analysis results of the die structure, structural safety of the die was evaluated with information such as displacement and von-Mises stress. It was concluded that the casting part could be designed in order to reduce tool deformation. A design guideline of the die structure was proposed, especially for the rib structure in the casting part with an optimization scheme and local reinforcement concept. Simulation result following the design guideline fully explained that stability of the tool structure could be obtained simultaneously with weight minimization.

키워드

참고문헌

  1. M. J. Song, Y. T. Keum, 2006, Forming Analysis of Automotive Fender Panel considering Die Deformation, Trans. Mater. Process., Vol. 15, No. 5, pp. 387-394. https://doi.org/10.5228/KSPP.2006.15.5.387
  2. J. S. Park, H. J. Choi, S. H. Kim, 2014, Improvement in Prediction Accuracy of Springback for Stamping CAE considering Tool Deformation, Trans. Mater. Process., Vol. 23, No. 6, pp. 380-385. https://doi.org/10.5228/KSTP.2014.23.6.380
  3. J. H. Lee, S. B. Bae, K. T. Yoon, J. Y. Heo, S. H. Kim, C. D. Park, 2016, Wear Life Prediction of CrN Coating Layer on the Press Tool for Stamping the Ultra High Strength Steel Sheet, Trans. Mater. Process., Vol. 26, No. 3, pp. 137-143. https://doi.org/10.5228/KSTP.2017.26.3.137
  4. R. Hill, 1948, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. R. Soc. London, Ser. A, Vol. 193, No. 1033, pp. 281-297. https://doi.org/10.1098/rspa.1948.0045
  5. F. Yoshida, T. Uemori, 2002, A Model of Large-Strain Cyclic Plasticity Describing the Bauschinger Effect and Workhardening Stagnation, Int. J. Plast., Vol. 18, No. 5-6, pp. 661-686. https://doi.org/10.1016/S0749-6419(01)00050-X
  6. ESI Group, PAM-STAMPTM, User's Manual, 2012.
  7. Altair Engineering, Hyperworks Optistruct Design Optimization, User's Guide Version 13.0, 2015.
  8. K. H. Kang, 2015, Design Guideline with the Structural Analysis of the Press Die for Stamping an Auto-part with Ultra High Strength Steel of 1.5GPa UTS-grade, M. S. Thesis, Graduate School, Daegu University, Gyeongbuk, Korea.
  9. H. J. Choi, 2012, Structural Analysis and Design Optimization of Press Tools for an Automotive Part with High-Strength Steel, M. S. Thesis, Graduate School, Daegu University, Gyeongbuk, Korea.
  10. S. H. Kim, K. H. Kang, J. H. Kwak, 2016, Method of Designing Press Die for Cold Forming Parts with Ultra High Strength Steel, Korea Patent, P-2016-0087870, under review.