References
- S. M. Goushegir, J. F. Dos Santos, S. T. Amancio-Filho, 2015, Influence of Process Parameters on Mechanical Performance and Bonding Area of AA2024/Carbon Fiber Reinforced Poly Friction Spot Single Lap Joint, Mater. Des., Vol. 83, pp. 431-442. https://doi.org/10.1016/j.matdes.2015.06.044
- H. Badarinarayan, Y. Shi, X. Li, K. Okamoto, 2009, Effect of Tool Geometry on Hook Formation and Static Strength of Friction Stir Spot Welded Aluminum 5754-O Sheets, Int. J. Mach. Tools Manuf., Vol. 49, No. 11, pp. 814-823. https://doi.org/10.1016/j.ijmachtools.2009.06.001
- K. Martinsen, S. J. Hu, B. E. Carlson, 2015, Joining of Dissimilar Materials, CIRP Ann. Manuf. Technol., Vol. 64, No. 2, pp. 679-699. https://doi.org/10.1016/j.cirp.2015.05.006
- C. J. Lee, J. Y. Kim, S. K. Lee, D. C. Ko, B. M. Kim, 2010, Design of Mechanical Clinching Tools for Joining of Aluminum Alloy Sheets, Mater. Des., Vol. 31, No. 4, pp. 1854-1861. https://doi.org/10.1016/j.matdes.2009.10.064
- Y. Abe, K. Mon, T. Kato, 2012, Joining of High Strength Steel and Aluminum Alloy Sheets by Mechanical Clinching with Dies for Control of Metal Flow, J. Mater. Process. Technol., Vol. 212, No. 4, pp. 884-889. https://doi.org/10.1016/j.jmatprotec.2011.11.015
- V. Jayasekara, K. H. Min, J. H. Noh, M. T. Kim, J. M. Seo, H. Y. Lee, B. B. Hwang, 2010, Rigid Plastic and Elastic Plastic Finite Element Analysis on the Clinching Joint Process of Thin Metal Sheets, Met. Mater. Int., Vol. 16, No. 2, pp. 339-347. https://doi.org/10.1007/s12540-010-0427-7
- N. S. Ahn, C. J. Lee, J. M. Lee, D. C. Ko, S. B Lee, B. M. Kim, 2012, Joining High Strength Steel and Al6061 Sheet using Hole Clinching Process, Trans. Kor. Soc. Mech. Eng., Vol. 36, No. 6, pp. 691-698. https://doi.org/10.3795/KSME-A.2012.36.6.691
- S. H. Lee, C. J. Lee, K. H. Lee, J. M. Lee, B. M. Kim, D. C. Ko, 2014, Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC440, Adv. Mech. Eng., Vol. 2014, pp. 1-12.
- C. J. Lee, S. H. Lee, J. M. Lee, B. H. Kim, B. M. Kim, D. C. Ko, 2014, Design of Hole Clinching Process for Joining CFRP and Aluminum Alloy Sheet, Int. J. Precis. Eng. Manuf., Vol. 15, No. 6, pp. 1151-1157. https://doi.org/10.1007/s12541-014-0450-6
- C. J. Lee, J. M. Lee, H. Y. Ryu, K. H. Lee, B. M. Kim, D. C. Ko, 2014, Design of Hole Clinching Process for Joining of Dissimilar Materials Al6061-T4 Alloy with DP780 Steel, Hot Pressed 22MnB5 Steel, and Carbon Fiber Reinforced Plastic, J. Mater. Process. Technol., Vol. 214, No. 10, pp. 2169-2178. https://doi.org/10.1016/j.jmatprotec.2014.03.032
- K. T. Kim, Y. S. Kim, 2012, Optimization for Thermal Spray Process by Taguchi Method, Kor. Soc. Power Eng., Vol. 16, No. 2, pp. 54-59 https://doi.org/10.9726/kspse.2012.16.2.054
- D. S. Kang, E. T. Park, A. Tullu, B. S. Kang, W. J. Song, W. J. Song, 2016, Prediction and Verification of Lateral Joining Strength for Tapered Hole Clinching using the Taguchi Method, Trans. Mater. Process., Vol. 25, No. 1, pp. 36-42. https://doi.org/10.5228/KSTP.25.1.36
- W. Yuan, R.S. Mishra, S. Webb, Y.L. Chen, B. Carlson, D.R. Herling, G.J. Grant, 2011, Effect of Tool Design and Process Parameters on Properties of Al6016 Alloy Friction Stir Spot Welds, J. Mater. Process. Technol., Vol. 211, No. 6, pp. 972-977. https://doi.org/10.1016/j.jmatprotec.2010.12.014
- Y. Tozaki, Y. Uematsu, K. Tokaji, 2007, Effect of Tool Geometry on Microstructure and Static Strength in Friction Stir Spot Welded Aluminum Alloys, Int. J. Mach. Tools Manuf., Vol. 47, No. 15, pp. 2230-2236. https://doi.org/10.1016/j.ijmachtools.2007.07.005
- Y. Rostamiyan, A. Sedianloo, H. Sohrabpoor, R, Teimouri, 2015, Experimental Studies on Ultrasonically Assisted Friction Stir Spot Welding of AA6061, Arch. Civ. Mech. Eng., Vol. 15, No. 15, pp. 335-346. https://doi.org/10.1016/j.acme.2014.06.005
- M. Merzoug, M. Mazari, L. Berrahal, A. Imad, 2010, Parametric Studies of the Process of Friction Spot Stir Welding of Aluminum 6060-T5 Alloys, Mater. Des., Vol. 31, No. 6, pp. 3023-3028. https://doi.org/10.1016/j.matdes.2009.12.029
- G. Shen. 2016, Tool Geometry Design by the Prediction of Failure Mode in Hole Clinching of Dissimilar Materials, M. S. Thesis, Pusan National University, Pusan, pp. 56-57.