DOI QR코드

DOI QR Code

Equations to evaluate fundamental period of vibration of buildings in seismic analysis

  • Sangamnerkar, Prakash (M.P. Housing and Infrastructure Development Board) ;
  • Dubey, S.K. (Maulana Azad National Institute of Technology)
  • 투고 : 2017.08.05
  • 심사 : 2017.12.08
  • 발행 : 2017.12.25

초록

In this study effects of various parameters like a number of bays, the stiffness of the structure along with the height of the structure was examined. The fundamental period of vibration T of the building is an important parameter for evaluation of seismic base shear. Empirical equations which are given in the Indian seismic code for the calculation of the fundamental period of a framed structure, primarily as a function of height, and do not consider the effect of number of bays and stiffness of the structure. Building periods predicted by these expressions are widely used in practice, although it has been observed that there is scope for further improvement in these equations since the height alone is inadequate to explain the period variability. The aim of this study is to find the effects of a number of bays in both the directions, the stiffness of the structure and propose a new period equation which incorporates a number of bays, plan area, stiffness along with the height of the structure.

키워드

참고문헌

  1. Amanat, K.M. and Hoqueb, E. (2006), "A rational for determining the natural period of RC building frames having infill", Eng. Struct., 28, 495-502. https://doi.org/10.1016/j.engstruct.2005.09.004
  2. Anil, O. and Altin, S. (2007), "An experimental study on reinforced concrete partially in filled frames", Eng. Struct., 29(3), 449-460. https://doi.org/10.1016/j.engstruct.2006.05.011
  3. Applied Technological Council (1978), Tentative Provisions For The Development of Seismic Regulation For Buildings, Rep. No ATC3-06, Applied Technological Council, Paolo Alto, California.
  4. Crowley, H. and Pinho, R. (2006), "Simplified equations for estimating the period of vibration of existing buildings", Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
  5. Gallipoli, M.R., Mucciarelli, M. and Gosar, A. (2010), "Empirical estimates of dynamic parameters on a large set of European buildings", Bull. Earthq. Eng., 8(3), 593-607. https://doi.org/10.1007/s10518-009-9133-6
  6. Goel Rakesh, K. and Chopra Anil, K. (1997), "Period formulas for moment-resisting frame buildings", Struct. Eng. Div. - ASCE, 123, 1454-1461. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1454)
  7. Gong, M., Sun, J. and Xue, L. (2011), "Empirical formula of fundamental period for steel structure based on seismic response record", Proceedings of the International Conference on Civil Engineering (ICETCE), Lushan, China.
  8. Guler, K., Yuksel, E. and Kocak, A. (2008), "Estimation of the fundamental vibration period of existing RC buildings in Turkey utilizing ambient vibration records", J. Earthq. Eng., 12(2), 140-150. https://doi.org/10.1080/13632460802013909
  9. Hong, L.L. and Hwang, W.L. (2000), "Empirical formula for fundamental vibration periods of reinforced concrete buildings in Taiwan", Earthq. Eng. Struct. D., 9(3), 327-337.
  10. Ingle, R.K. (1997), "Time period of elevated water tower", Indian Concrete J., 71, 497.
  11. IS-875-1987 Part-1, 2 "Indian Standard Code Of Practice For Structural Safety Loadings" Bureau of Indian Standards, New Delhi.
  12. IS 1893(Part1): (2016), Indian Standard Criteria for Earthquake Resistant Design Of Structures-Part-1, General Provisions and Buildings, Bureau of Indian Standards, New Delhi.
  13. Kwon, O.S. and Kim, E.S. (2010), "Evaluation of building period formulas for seismic design", Earthq. Eng. Struct. D., 39, 1569-1583. https://doi.org/10.1002/eqe.998
  14. Michel, C., Gueguen, P., Lestuzzi, P. and Bard, Y. (2010), "Comparison between seismic vulnerability models and experimental dynamic properties of existing buildings in France", Bull. Earthq. Eng., 8(6), 1295-1307. https://doi.org/10.1007/s10518-010-9185-7
  15. Navarro, M., Vidal, F., Enomoto, T., Alcala, F.J., Garcia-Jerez, A., Sanchez, F.J. and Abeki, N. (2007), " Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: the Adra town example (SE Spain)", Earthq. Eng. Struct. D., 36(10), 1363-1383. https://doi.org/10.1002/eqe.685
  16. Nyrko, M.H., Morie, D., Draganic H. and Nyarko, E.K. (2012), "New direction based (Fundamental) periods of RC frames using Genetic Algorithms", Proceedings of the 15th World Conference On Earthquake Engineering, Lisboa.
  17. Oliveria, C.S. and Navarro, M. (2010), "Fundamental period of vibration of RC buildings in Portugal in-situ experimental and numerical techniques", Bull Earthq. Eng., 8, 609- 642. https://doi.org/10.1007/s10518-009-9162-1
  18. Panzera, F., Lombardo, G. and Muzzetta, I. (2013), "Evaluation of building dynamic properties through in situ experimental techniques and 1D modeling: The example of Catania, Italy", Phys. Chem. Earth, 63, 136-146. https://doi.org/10.1016/j.pce.2013.04.008
  19. Salama, M.I. (2014), "Estimation of period of vibration for concrete moment-resisting frame buildings", HBRC Journal, http://dx.doi.org/10.1016/j.hbrcj.2014.01.006.
  20. Shan, J., Shi, W. and Wang, J. (2013), "Regional study on structural dynamic property of buildings in China", Earthq. Eng. Struct. D., 42, 1013-1029. https://doi.org/10.1002/eqe.2256
  21. STAAD Pro-V8i -Structural analyses and designing software by Bentley.
  22. Vance, V.L. (1995), "Effects of architectural walls on building response and performance", The John A. Blume Earthquake Eng. Center, Stanford University, 5, 8-24.
  23. Verderame, G.M., Iervolino, I. and Manfredi, G. (2009), "Elastic period of existing RC-MRF buildings", Eurocode 8 Perspectives from Indian Standpoint Workshop, Napoli, Italy, 79-94.