Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Numerical study on effect of integrity reinforcement on punching shear of flat plate

  • Ahsan, Raquib (Department of Civil Engineering, Bangladesh University of Engineering and Technology) ;
  • Zahura, Fatema T. (Department of Civil Engineering, Ahsanullah University of Science and Technology)
  • Received : 2016.08.11
  • Accepted : 2017.09.02
  • Published : 2017.12.25
⟨ Previous Next ⟩

Abstract

Reinforced concrete flat plates consist of slabs supported directly on columns. The absence of beams makes these systems attractive due to advantages such as economical formwork, shorter construction time, less total building height with more clear space and architectural flexibility. Punching shear failure is usually the governing failure mode of flat plate structures. Punching failure is brittle in nature which induces more vulnerability to this type of structure. To analyze the flat plate behavior under punching shear, twelve finite element models of flat plate on a column with different parameters have been developed and verified with experimental results. The maximum range of variation of punching stress, obtained numerically, is within 10% of the experimental results. Additional finite element models have been developed to analyze the influence of integrity reinforcement, clear cover and column reinforcement. Variation of clear cover influences the punching capacity of flat plate. Proposed finite element model can be a substitute to mechanical model to understand the influence of clear cover. Variation of slab thickness along with column reinforcement has noteworthy impact on punching capacity. From the study it has been noted that integrity reinforcement can increase the punching capacity as much as 19 percent in terms of force and 101 percent in terms of deformation.

Keywords

References

  1. Abaqus 6.9 (2009), Abaqus Analysis User's Manual, DassaultSystemesSimulia Corp., Providence, Rhode Island, U.S.A.
  2. Abaqus 6.9 (2009), Abaqus Analysis User's Manual, DassaultSystemesSimulia Corp., Providence, Rhode Island, U.S.A.
  3. ACI 318-05 (2005), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  4. Eurocode 2 (2004), Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization (CEN), Brussels, Belgium.
  5. Fib (2010), International Federation for Structural Concrete, Comite Euro-International and Federation for Prestressing, Lausanne, Switzerland.
  6. Guandalini, S., Burdet, O. and Muttoni, A. (2009), "Punching tests of slabs with low reinforcement ratios", ACI Structural J., 106(1), 87-95.
  7. Keyvani, L., Sasani, M. and Mirzaei, Y. (2014), "Compressive membrane action in progressive collapse resistance of RC flat plates", Eng. Struct., 59, 554-564. https://doi.org/10.1016/j.engstruct.2013.10.040
  8. Kinnunen, S. and Nylander, H. (1960), Punching of Concrete Slabs without Reinforcement", Royal Institute of Technology, Stockholm, Sweden.
  9. Kurtoglula, A.E., Cevik, A., Albegmprli, H.M., Gulsan, M.E. and Bilgehanld, M. (2016), "Reliability-based modeling of punching shear capacity of FRP-reinforced two-way slabs", Comput. Concrete, 17(1), 0-20.
  10. Lips, S., Ruiz, F.M. and Muttoni, A. (2012), "Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs", ACI Struct. J., 109, 889-900.
  11. Mahmoud, A.M. (2015), "Finite element implementation of punching shear behaviors in shear-reinforced flat slabs", Ain Sham. Eng. J., 6(3), 735-754. https://doi.org/10.1016/j.asej.2014.12.015
  12. Mirzaei, Y. and Sasani, M. (2011), "Punching shear failure in progressive collapse analysis", Struct. Congr., 2941-2950.
  13. Mirzaei, Y. and Sasani, M. (2013), "Progressive collapse resistance of flat slab-modeling post punching behavior", Comput. Concrete, 12(3), 351-375. https://doi.org/10.12989/cac.2013.12.3.351
  14. Micallef, K., Sagaseta, J., Fernandez, R.M. and Muttoni, A. (2014), "Assessing punching shear failure in reinforced concrete at slabs subjected to localized impact loading", J. Imp. Eng., 71, 17-33. https://doi.org/10.1016/j.ijimpeng.2014.04.003
  15. Moeinaddin, F. (2012), "Concentric punching shear strength of reinforced concrete flat plates", M.Sc. Dissertation, Swinburne University of Technology, Melbourne, Australia.
  16. Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
  17. Ruiz, F.M. and Muttoni, A. (2009), "Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement", ACI Struct. J., 106(4), 485-494.
  18. Ruiz, F.M., Mirzaei, Y. and Muttoni, A. (2013), "Post-punching behavior of flat slabs", ACI Struct. J., 110(5), 801-812.
  19. Shuraim, A.B., Aslam, F., Hussain, R.R. and Alhozaimy, A.M. (2016), "Analysis of punching shear in high strength RC panels-experiments, comparison with codes and FEM results", Comput. Concrete, 17(6), 739-760. https://doi.org/10.12989/cac.2016.17.6.739
  20. Zahura, F.T. and Ahsan, R. (2016), "Numerical simulation of punching shear of flat plates with low reinforcement", J. Civil Environ. Struct. Constr. Architect. Eng., 10(7), 883-886.

Cited by

  1. Parametric studies on punching shear behavior of RC flat slabs without shear reinforcement vol.25, pp.4, 2017, https://doi.org/10.12989/cac.2020.25.4.355
  2. Experimental study of punching shear in post-tensioned slabs with unbonded tendons vol.79, pp.4, 2017, https://doi.org/10.12989/sem.2021.79.4.507