DOI QR코드

DOI QR Code

Effect of curing conditions on mode-II debonding between FRP and concrete: A prediction model

  • Jiao, Pengcheng (Department of Civil and Environmental Engineering, Zhejiang University) ;
  • Soleimani, Sepehr (Department of Civil and Environmental Engineering, Michigan State University) ;
  • Xu, Quan (State Key Laboratory of Heavy Oil Processing, China University of Petroleum (Beijing)) ;
  • Cai, Lulu (Personalized Drug Therapy Key Laboratory of Sichuan Province, Hospital of the University of Electronic Science and Technology of China and Sichuan Provincial People's Hospital) ;
  • Wang, Yuanhong (Center of Analysis and Testing, Institute of Analytical Chemistry for Life Science, School of Public Health, Nantong University)
  • 투고 : 2016.12.09
  • 심사 : 2017.07.10
  • 발행 : 2017.12.25

초록

The rehabilitation and strengthening of concrete structures using Fiber-Reinforced Polymer (FRP) materials have been widely investigated. As a priority issue, however, the effect of curing conditions on the bonding behavior between FRP and concrete structures is still elusive. This study aims at developing a prediction model to accurately capture the mode-II interfacial debonding between FRP strips and concrete under different curing conditions. Single shear debonding experiments were conducted on FRP-concrete samples with respect to different curing time t and temperatures T. The J-integral formulation and constrained least square minimization are carried out to calibrate the parameters, i.e., the maximum slip $\bar{s}$ and stretch factor n. The prediction model is developed based on the cohesive model and Arrhenius relationship. The experimental data are then analyzed using the proposed model to predict the debonding between FRP and concrete, i.e., the interfacial shear stress-slip relationship. A Finite Element (FE) model is developed to validate the theoretical predictions. Satisfactory agreements are obtained. The prediction model can be used to accurately capture the bonding performance of FRP-concrete structures.

키워드

과제정보

연구 과제 주관 기관 : National Nature Science Foundation of China

참고문헌

  1. Soleimani, S., Rajaei, S., Jiao, P. and Soheilinia, S. (2017), "New prediction models for unconfined compressive strength of geopolymer stabilized solid using multi-gen genetic programming", Measure., 113, 99-107.
  2. Alavi, A.H., Hasni, H., Jiao, P., Borchani, W. and Chatti, K. (2017), "Fatigue cracking detection in steel bridge girders through a self-powered sensing concept", J. Constr. Steel Res., 128, 19-38. https://doi.org/10.1016/j.jcsr.2016.08.002
  3. Barbieri, G., Biolzi, L., Bocciarelli, M. and Cattaneo, S. (2016), "Size and shape effect in the pull-out of FRP reinforcement from concrete", Compos. Struct., 143, 395-417. https://doi.org/10.1016/j.compstruct.2016.01.097
  4. Benzarti, K., Chataigner, S., Quiertant, M., Marty, C. and Aubagnac, C. (2011), "Accelerate ageing behavior of the adhesive bond between concrete specimens and CFRP overlays", Constr. Build. Mater., 25(2), 523-538. https://doi.org/10.1016/j.conbuildmat.2010.08.003
  5. Buyukozturk, O., Gunes, O. and Karaca, E. (2004), "Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites", Constr. Build. Mater., 18, 9-19. https://doi.org/10.1016/S0950-0618(03)00094-1
  6. Choi, C.K. and Cheung, S.H. (1996), "Tension stiffening model for planar reinforced concrete members", Comput. Struct., 59(1), 179-190. https://doi.org/10.1016/0045-7949(95)00146-8
  7. Ferracuti, B., Savoia, M. and Mozzatti, C. (2007), "Interface law for FRP-concrete delamination", Compos. Struct., 80, 523-531. https://doi.org/10.1016/j.compstruct.2006.07.001
  8. Foraboschi, P. (2012), "Predictive multiscale model of delayed debonding for concrete members with adhesively bonded external reinforcement", Compos.: Mech. Comput. Appl., 3(4), 307-329. https://doi.org/10.1615/CompMechComputApplIntJ.v3.i4.20
  9. Freddi, F. and Savoia, M. (2008), "Analysis of FRP-concrete debonding via boundary integral equations", Eng. Fract. Mech., 75(6), 1666-1683. https://doi.org/10.1016/j.engfracmech.2007.05.016
  10. Hasni, H., Alavi, A.H., Jiao, P. and Lajnef, N. (2017), "Detection of fatigue cracking in steel bridge girders: A support vector machine approach", Arch. Civil Mech. Eng., 17, 609-622. https://doi.org/10.1016/j.acme.2016.11.005
  11. Hasni, H., Alavi, A.H., Jiao, P., Lajnef, N., Chatti, K., Aono, K. and Chakrabartty, S. (2017), "A new approach for damage detection in asphalt concrete pavements using battery-free wireless sensors with non-constant injection rates", Measure., 110, 217-229.
  12. Jiao, P, Borchani, W., Alavi, A.H., Hasni, H. and Lajnef, N. (2017), "An energy harvesting and damage sensing solution based on post-buckling response of non-uniform cross-section beams", Struct. Contr. Health Monitor., e2052, 1-19.
  13. Jiao, P., Borchani, W., Hasni, H., Alavi, A.H. and Lajnef, N. (2016), "Post-buckling response of non-uniform cross-section bilaterally constrained beams", Mech. Res. Commun., 78, 42-50. https://doi.org/10.1016/j.mechrescom.2016.09.012
  14. Jiao, P., Borchani, W., Hasni, H. and Lajnef, N. (2017), "A new solution of measuring thermal response of prestressed concrete bridge girders for structural health monitoring", Measure. Sci. Technol., 28(8), 085005. https://doi.org/10.1088/1361-6501/aa6c8e
  15. Jiao, P., Borchani, W., Hasni, H. and Lajnef, N. (2017), "Static and dynamic post-buckling analyses of irregularly constrained beams under the small and large deformation assumptions", J. Mech. Sci., 124, 203-215.
  16. Kodur, V.K.R. and Yu, B. (2016), "Rational approach for evaluating fire resistance of FRP-strengthened concrete beams", J. Compos. Constr., 20(6), 04016041. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000697
  17. Hasni, H., Jiao, P., Alavi, A.H., Lajnef, N. and Masri, S.F. (2017), "Structural health monitoring of steel frames using a network of self-powered strain and acceleration sensors: A numerical study", Automat. Construct., 85, 344-357.
  18. Mazzotti, C., Savoia, M. and Ferracuti, B. (2009), "A new single-shear set-up for stable debonding of FRP-concrete joints", Constr. Build. Mater., 23(4), 1529-1537. https://doi.org/10.1016/j.conbuildmat.2008.04.003
  19. Soleimani, S., Jiao, P., Rajaei, S. and Forsati, R. (2017), "A new approach for prediction of collapse settlement of sandy gravel soils", Eng. Comput.
  20. Teng, J.G., Yuan, H. and Chen, J.F. (2006), "FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure", J. Sol. Struct., 43, 5750-5778. https://doi.org/10.1016/j.ijsolstr.2005.07.023
  21. Tuakta, C. and Buyukozturk, O. (2011), "Deterioration of FRP/concrete bond system under variable moisture conditions quantified by fracture mechanics", Compos. B: Eng., 42(2), 145-154. https://doi.org/10.1016/j.compositesb.2010.11.002
  22. Ouyang, Z. and Wan, B., (2009), "Nonlinear deterioration model for bond interfacial fracture energy of FRP-concrete joints in moist environments", J. Compos. Constr., 13(1), 53-63. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:1(53)
  23. Rice, J.R. (1988), "Elastic fracture mechanics concepts for interfacial cracks", J. Appl. Mech., 55(1), 98-103. https://doi.org/10.1115/1.3173668
  24. Wang, J. and Qiao, P. (2004), "Interface crack between two shear deformable elastic layers", J. Mech. Phys. Sol., 52, 891-905. https://doi.org/10.1016/S0022-5096(03)00121-2
  25. Wu, Z.S., Yuan, H. and Niu, H. (2002), "Stress transfer and fracture propagation in different kinds of adhesive joints", J. Eng. Mech., 128(5), 562-573. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:5(562)
  26. Xiao, J., Huang, Y., Yang, J. and Zhang, C. (2012), "Mechanical properties of confined recycled aggregate concrete under axial compression", Constr. Build. Mater., 26(1), 591-603. https://doi.org/10.1016/j.conbuildmat.2011.06.062
  27. Yuan, H., Teng, J.G., Seracino, R., Wu, Z.S. and Yao, J. (2004), "Full-range behavior of FRP-to-concrete bonded joints", Eng. Struct., 26(5), 553-565. https://doi.org/10.1016/j.engstruct.2003.11.006