DOI QR코드

DOI QR Code

Study on behavior of RCC beams with externally bonded FRP members in flexure

  • Sumathi, A. (School of Civil Engineering, SASTRA University) ;
  • Arun Vignesh, S. (School of Civil Engineering, SASTRA University)
  • 투고 : 2017.05.01
  • 심사 : 2017.12.06
  • 발행 : 2017.12.25

초록

The flexural behavior of Fiber reinforced polymer (FRP) sheets has gained much research interest in the flexural strengthening of reinforced concrete beams. The study on flexure includes various parameters like increase in strength of the member due to the externally bonded (EB) Fiber reinforced polymer, crack patterns, debonding of the fiber from the structure, scaling, convenience of using the fibers, cost effectiveness, etc. The present work aims to study experimentally about the reasons behind the failure due to flexure of an externally bonded FRP concrete beam. In the design of FRP-reinforced concrete structures, deflection control is as critical as much as flexural strength. A numerical model is created using Finite element (FEM) software and the results are compared with that of the experiment.

키워드

참고문헌

  1. Adil, A.T., Farid, H.A. and Abdulla, A.R. (2014), "Effects of harsh environmental exposures on the bond capacity between concrete and GFRP reinforcing bars", Adv. Concrete Constr., 2(1), 1-11. https://doi.org/10.12989/acc2014.2.1.001
  2. Al-Rousan, R. and Haddad, R. (2013), "NLFEA sulfate- damage reinforced concrete beams strengthened with FRP", Compos. Struct., 96, 433-445. https://doi.org/10.1016/j.compstruct.2012.09.007
  3. Balsamo, A., Nardone, F., Iovinella, I., Ceroni, F. and Pecce, M. (2013), "Flexural strengthening of concrete beams with EB-FRP, SRP and SRCM: Experimental investigation", Compos. Part B Eng., 46, 91-101. https://doi.org/10.1016/j.compositesb.2012.10.014
  4. Barros, J.A.O. and Figueiras, J.A. (1996), Flexure Behavior of SFRC: Testing and Modelling, ISISE-Comunicacoes a Conferencias Internacionais Magazine.
  5. Chakrabortty and A. Khennane. (2014), "Failure mechanisms of hybrid FRP-concrete beams with external filament-wound wrapping", Adv. Concrete Constr., 2(1), 57-75. https://doi.org/10.12989/acc.2014.2.1.057
  6. Grace, N., Abdel-Sayed, G. and Ragheb, W. (2002), "Strengthening of concrete beams using innovative ductile fiber-reinforced polymer fabric", ACI Struct. J., 99, 692-700.
  7. Hamid, R. and Allan, H. (2001), "Concrete beams strengthened with externally bonded FRP plates", J. Compos. Constr., 5, 44-56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  8. Hawileh, R.A., Hayder, A.R., Jamal, A.A. and Adil, K.A., (2014b) , "Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems", Mater. Des., 53, 972-982. https://doi.org/10.1016/j.matdes.2013.07.087
  9. Hawileh, R.A., Mohannad, Z.N. and Jamal, A.A. (2013c), "Finite element simulation of reinforced concrete beams externally strengthened with short-length CFRP plates", Compos. Part B Eng., 45, 1722-1730. https://doi.org/10.1016/j.compositesb.2012.09.032
  10. Hawileh, R.A., Obeidah, A.A., Jamal, A.A. and Adil, A.T. (2015a), "Temperature effect on the mechanical properties of carbon, glass and carbon-glass FRP laminates", Constr. Build. Mater., 75, 342-348. https://doi.org/10.1016/j.conbuildmat.2014.11.020
  11. Hawileh, R.A., Tamer, A.E.M. and Mohannad, Z.N. (2012d), "Nonlinear finite element modeling of concrete deep beams with openings strengthened with externally-bonded composites", Mater. Des., 42, 378-387. https://doi.org/10.1016/j.matdes.2012.06.004
  12. Hong, K.N., Cho, C.G., Lee, S.H. and Park, Y.H. (2011), "Flexural behavior of RC members using externally bonded aluminum-glass fiber composite beams", Polym., 6(3), 667-685. https://doi.org/10.3390/polym6030667
  13. IS 2386 (1986), Methods of Test for Aggregates for Concrete, Bureau of Indian standards, New Delhi, India.
  14. IS 383 (1970), Specification of Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards (BIS), New Delhi, India.
  15. IS12269 (1997), Specifications for 53 Grade Ordinary Portland Cement, Bureau of Indian Standards, New Delhi, India.
  16. Kolluru, V.S., Christian, C. and Lucio, N. (2007), "Width effect in the interface fracture during shear bonding of FRP sheets from concrete", Eng. Fract. Mech., 74, 578-594. https://doi.org/10.1016/j.engfracmech.2006.09.002
  17. Lesley, H.S., Salvatore, V., Christian, C. and Luciano, O. (2016), "Flexural behavior of RC beams strengthened with steel-FRCM composite", Eng. Struct., 127, 686-699. https://doi.org/10.1016/j.engstruct.2016.09.006
  18. Prota, A., Tan, K.Y., Nanni, A., Pecce, M. and Manfredi, G. (2006), "Performance of shallow reinforced concrete beams with externally bonded steel-reinforced polymer", ACI Struct. J., 163-170.
  19. Thomsen , H., Spacone, E., Limkatanyu, S. and Camata, G. (2004), "Failure mode analyses of reinforced concrete beams strengthened in flexure with externally bonded fiber-reinforced polymers", J. Compos. Constr., 8, 123-132. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(123)
  20. Xiong, G., Yang, J. and Ji, Z. (2004), "Behavior of reinforced concrete beams strengthened with externally bonded hybrid carbon fiber-glass fiber sheets", J. Compos. Constr., 8, 275-278. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:3(275)

피인용 문헌

  1. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877
  2. Quantitative assessment on the reinforcing behavior of the CFRP-PCM method on tunnel linings vol.25, pp.2, 2021, https://doi.org/10.12989/gae.2021.25.2.123