Advances in concrete construction

  • 제5권6호
  • /
  • Pages.563-573
  • /
  • 2017
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Characterization of recycled polycarbonate from electronic waste and its use in hydraulic concrete: Improvement of compressive performance

  • Colina-Martinez, Ana L. De la (Posgrado en Ciencia de Materiales, Facultad de Quimica, Universidad Autonoma del Estado de Mexico) ;
  • Martinez-Barrera, Gonzalo (Laboratorio de Investigacion y Desarrollo de Materiales Avanzados (LIDMA), Facultad de Quimica. Universidad Autonoma del Estado de Mexico) ;
  • Barrera-Diaz, Carlos E. (Centro Conjunto de Investigacion en Quimica Sustentable UAEM-UNAM, Universidad Autonoma del Estado de Mexico Campus El Rosedal) ;
  • Avila-Cordoba, Liliana I. (Facultad de Ingenieria, Universidad Autonoma del Estado de Mexico) ;
  • Urena-Nunez, Fernando (Instituto Nacional de Investigaciones Nucleares)
  • 투고 : 2017.04.11
  • 심사 : 2017.09.21
  • 발행 : 2017.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Transparency, excellent toughness, thermal stability and a very good dimensional stability make Polycarbonate (PC) one of the most widely used engineering thermoplastics. Polycarbonate market include electronics, automotive, construction, optical media and packaging. One alternative for reducing the environmental pollution caused by polycarbonate from electronic waste (e-waste), is to use it in cement concretes. In this work, physical and chemical characterization of recycled polycarbonate from electronic waste was made, through the analysis by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and scanning electron microscope (SEM). Then cement concrete was made with Portland cement, sand, gravel, water, and this recycled polycarbonate. Specimens without polycarbonate were produced for comparison purposes. The effect of the particle sizes and concentrations of recycled polycarbonate within the concrete, on the compressive strength and density was studied. Results show that compressive strength values and equilibrium density of concrete depend on the polycarbonate particle sizes and its concentrations; particularly the highest compressive strength values were 20% higher than that for concrete without polycarbonate particles. Moreover, morphological, structural and crystallinity characteristics of recycled polycarbonate, are suitable for to be mixed into concrete.

키워드

참고문헌

  1. ACI 213R (2003), Guide for Structural Lightweight-Aggregate, Concrete American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  2. ASTM (2014), ASTM C567/C567M-14 Standard Test Method for Determining Density of Structural Lightweight Concrete, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  3. ASTM (2015), ASTM C192/C192M-15 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  4. Covestro (2015), Makrolon$^{(R)}$ Polycarbonate Sheet. Fabrication Guide, Research Report BRO000 0915, Covestro, Sheffield, Massachusetts, U.S.A.
  5. Hannawi, K., Kamali-Bernard, S. and Prince, W. (2010), "Physical and mechanical properties of mortars containing PET and PC waste aggregates", Waste Manage. Dispos., 30(11), 2312-2320. https://doi.org/10.1016/j.wasman.2010.03.028
  6. Hokenek, S. (2009), "Characterization of conductive polycarbonate films", M.S. Dissertation, University of South Florida, Florida, U.S.A.
  7. IHS Chemical (2013), Chemical Economics Handbook Polycarbonate Resins, IHS Chemical, London, U.K.
  8. Mayo, D.W., Miller, F.A. and Hannah, R.W. (2003), Course Notes on the Interpretation of Infrared and Raman Spectra, John Wiley & Sons, Hoboken, New Jersey, U.S.A.
  9. National Ready Mixed Concrete Association (2003), CIP 36-Structural Lightweight Concrete, Concrete In Practice.
  10. ONNCE (2004) Mexican Standard NMX-C-111-ONNCCE-2004 Building Industry-Aggregates for Hydraulic Concrete-Specifications and Test Methods, National Standardization and Certification Body for Building and Construction, Mexico.
  11. Organization for Economic Cooperation and Development (2013), OECD Environmental Performance Reviews: Mexico 2013, OECD Publishing, Washington, U.S.A.
  12. Parshin, A.M., Gunyakov, V.A. and Zyryanov, V.Y. (2013), "Domain structures in nematic liquid crystals on a polycarbonate surface", J. Molecul. Sci., 14(8), 16303-16320.
  13. Ponde Weber, R., Vecchio, K.S. and Miguez Suarez, J.C. (2010), "Dynamic behavior of gamma-irradiated polycarbonate", Mater., 15(2), 218-224.
  14. Professional Plastics (2017), Polycarbonate Material Data Sheet General Purpose, Glazing Grade, Professional Plastics, U.S.A.
  15. Saikia, N. and De Brito, J. (2012), "Use of plastic waste as aggregate in cement mortar and concrete preparation: A review", Constr. Build. Mater., 34, 385-401. https://doi.org/10.1016/j.conbuildmat.2012.02.066
  16. Saikia, N. and De Brito, J. (2014), "Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate", Constr. Build. Mater., 52(15), 236-244. https://doi.org/10.1016/j.conbuildmat.2013.11.049
  17. Saraiva Ramos, A., Baldan, R. and Angelo Nunes, C. (2013), "Isothermal section of the Ti-Si-B system at $1250^{\circ}C$ in the Ti-TiSi2-TiB2 region", Mater. Res., 17(2), 392-396. https://doi.org/10.1590/S1516-14392013005000172
  18. Shi, F., Li, Y. and Zhang, Q. (2012), "Preparation of core/shell structured rutile/anatase photocatalyst via vapor phase hydrolysis and its photocatalytic degradation of phenol and methylene blue", J. Am. Ceram. Soc., 95(6), 1927-1932. https://doi.org/10.1111/j.1551-2916.2011.05069.x
  19. Sweileh, B.A., Al-Hiari, M.Y. and Kailani, H.M. (2010), "Synthesis and characterization of polycarbonates by melt phase interchange reactions of alkylene and arylene diacetates with alkylene and arylene diphenyl dicarbonates", Molecul. J., 15, 3661-3682. https://doi.org/10.3390/molecules15053661
  20. Tunckan, O., Salge, T. and Terborg, R. (2010), "Developments in quantitative EDS analysis, with a focus on light elemen and low energy peaks", Proceedings of the Bruker Nano Webinar, Billerica, Massachusetts, U.S.A., June.
  21. Universitat de Barcelona (2016), Materials, Policarbonato, Universitat de Barcelona, Barcelona, Spain, http://www.ub.edu/cmematerials/es/content/policarbonato.

피인용 문헌

  1. Post-Processing of 3D-Printed Polymers vol.9, pp.3, 2017, https://doi.org/10.3390/technologies9030061