DOI QR코드

DOI QR Code

Comparative Study of Bursting Force Equations for Post-Tensioned Anchorage Zones

포스트텐션 정착구역에서의 파열력 산정식 비교 분석

  • Received : 2017.10.11
  • Accepted : 2017.10.26
  • Published : 2017.12.15

Abstract

For evaluating equations of bursting force in different codes, comparative study of the formulas was conducted. Because the equations does not consider variables such as shape of anchorages, angle of tendons, and eccentricity, a relation between the bursting forces and the variables has to be analyzed. In this paper, therefore, a comparative analysis of bursting forces computed by equations in the codes and finite element analysis was performed. As a result, it could be figured out that bursting force equations in the local zone were determined by coefficient k.

Keywords

References

  1. Morsch, E., "uber die berechnung der gelenkquader", Beton-und-Eisen, Vol. 12, pp.156-161, 1924
  2. Guyon, Y., "Prestressed Concrete", Contractors Record and Municipal Engineering, London, p.543, 1953
  3. Stone, W.C., "Design Criteria For Post- Tensioned Anchorage Zone Tensile Stresses", Ph.D. Dissertation, The University of Texas at Austin, p.727, 1980
  4. Burdet, O.L., "Analysis and Design of Anchorage Zone in Post-tensioned Concrete Bridges", Ph.D. Dissertation, The University of Texas at Austin, p.443, 1990
  5. "AASHTO LRFD bridge design specification (SI units, 5th edition)", American Association of State Highway & Transportation Officials, Washington, D.D., 2010
  6. "Korean Highway Bridge Design Code", Ministry of Land, Transport and Maritime Affairs, p.980, 2010
  7. "ETAG 013 - Guideline for european technical approval of Post-tensioning kits for prestressing of structures", European Organisation for Technical Approvals, p.136, 2002
  8. Cho, A.S., Jo, Y.W., Jeon, B.K., and Kang, H.K., "Development and Performance Test for Unbonded Post-Tensioned Anchor", Journal of the Korea Concrete Institute, Vol. 27, No. 1, pp.13-14, 2015
  9. Taha, M.M.R., and Shrive, N.G., "New Concrete Anchors for Carbon Fiber-Reinforced Polymer Post-Tensioning Tendons-Part 1: State-of-the-Art Review/Design", ACI Structural Journal, Vol. 100, No. 1, Jan.-Feb. pp.91-93, 2003
  10. Lee, K.S., "Analysis of Intermediate Anchorage in PSC Box Girder using the Strutand- Tie Model", Master's Thesis, Sangji University, p.66, 2011

Cited by

  1. Anchorage Zone Reinforcement for Unbonded Post-Tensioned Circular Anchorage for Single Tendon vol.18, pp.3, 2018, https://doi.org/10.9712/KASS.2018.18.3.117