DOI QR코드

DOI QR Code

Study of fission gas products effect on thermal hydraulics of the WWER1000 with enhanced subchannel method

  • Bahonar, Majid (Department of Nuclear Engineering, Science and Research Branch, Islamic Azad University) ;
  • Aghaie, Mahdi (Department of Engineering, Shahid Beheshti University)
  • Received : 2017.01.11
  • Accepted : 2017.05.22
  • Published : 2017.06.25

Abstract

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

Keywords

References

  1. Aghaie, M., Zolfaghari, A. and Minuchehr, A. (2012b), "Coupled neutronic thermal-hydraulic transient analysis of accidents in PWRs", Annal. Nucl. Energy, 50, 158-166. https://doi.org/10.1016/j.anucene.2012.07.013
  2. Aghaie, M., Zolfaghari, A., Minuchehr, A., Shirani, A. and Norouzi, A. (2012a), "Transient analysis of break below the grid in Tehran research reactor using the newly enhanced COBRA-EN code", Annal. Nucl. Energy, 49, 1-11. https://doi.org/10.1016/j.anucene.2012.06.017
  3. Al-Waaly, A.A., Paul, M.C. and Dobson, P. (2017), "Liquid cooling of non-uniform heat flux of a chip circuit by subchannels", Appl. Therm. Eng., 115, 558-574. https://doi.org/10.1016/j.applthermaleng.2016.12.061
  4. Arshi, S. S., Mirvakili, S. M. and Faghihi, F. (2010), "Modified COBRA-EN code to investigate thermalhydraulic analysis of the Iranian WWER1000 core", Prog. Nucl. Energy, 52(6), 589-595. https://doi.org/10.1016/j.pnucene.2010.01.005
  5. Cai, R., Yue, N., Chen, R., Tian, W.X., Su, G.H. and Qiu, S.Z. (2016), "Development of a thermalhydraulic subchannel analysis code for motion condition", Prog. Nucl. Energy, 93, 165-176. https://doi.org/10.1016/j.pnucene.2016.08.018
  6. Deokattey, S., Bhanumurthy, K., Vijayan, P.K. and Dulera, I.V. (2013), "Hydrogen production using high temperature reactors: An overview", Adv. Energy Res., 1(1), 13-33. https://doi.org/10.12989/eri.2013.1.1.013
  7. Downar, T., Xu, Y. and Kozlowski, T. (2006), PARCS v2.7 U.S. NRC Core Neutronics Simulator USER MANUAL August, 2006, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana, U.S.A.
  8. Guk, E. and Kalkan, N. (2015), "The importance of nuclear energy for the expansion of world", Adv. Energy Res., 3(2), 71-80. https://doi.org/10.12989/eri.2015.3.2.071
  9. Ibrahim, Y.V., Adeleye, M.O., Njinga, R.L., Odoi, H.C. and Jonah, S.A. (2015), "Prompt neutron lifetime calculations for the NIRR-1 reactor", Adv. Energy Res., 3(2), 125-131. https://doi.org/10.12989/eri.2015.3.2.125
  10. Li, R., Chen, X. N., Andriolo, L. and Rineiski, A. (2017), "3D numerical study of LBE-cooled fuel assembly in MYRRHA using SIMMER-IV code", Annal. Nucl. Energy, 104, 45-52.
  11. Mitsuyasu, T., Aoyama, M. and Yamamoto, A. (2017), "A coupling model for the two-stage core calculation method with subchannel analysis for boiling water reactors", Annal. Nucl. Energy, 102, 77-84. https://doi.org/10.1016/j.anucene.2016.11.045
  12. Sharma, M.P. and Nayak, A.K. (2016), "Experimental investigation of two phase turbulent mixing rate under bubbly flow regime in simulated subchannels of a natural circulation pressure tube type BWR", Exp. Therm. Fluid Sci., 76, 228-237. https://doi.org/10.1016/j.expthermflusci.2016.03.016
  13. Trkov, A., Ravnik , M., Kromar, M., Slavic, S., Mele, I., Zeleznik, N. and Zefran, B. (2008), CORD-2 Core Design System for PWR Type Reactors, Jozef Stefan Institute, Ljubljana, Slovenia.
  14. Tyurina, E.A. and Mednikov, A.S. (2015), "Energy efficiency analyses of combined-cycle plant", Adv. Energy Res., 3(4), 195-203.
  15. USHEHR WWER1000 Reactor (2007), Final Safety Analysis Report (FSAR), Ministry of Russian Federation of Atomic Energy (Atomenergoproekt), Moscow IPPE, Mathematical department DynCo code.
  16. Zare, N., Fadaei, A.H., Rahgoshay, M., Fadaei, M.M. and Kia, S. (2010), "Introducing and validating a new method for coupling neutronic and thermal-hydraulic calculations", Nucl. Eng. Des., 240(11), 3727-3739. https://doi.org/10.1016/j.nucengdes.2010.08.013