Structural Engineering and Mechanics

  • 제64권6권
  • /
  • Pages.765-781
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Reliability of analytical models for the prediction of out-of-plane capacity of masonry infills

  • Pasca, Monica (Department of Structural and Geotechnical Engineering, "Sapienza" University of Rome) ;
  • Liberatore, Laura (Department of Structural and Geotechnical Engineering, "Sapienza" University of Rome) ;
  • Masiani, Renato (Department of Structural and Geotechnical Engineering, "Sapienza" University of Rome)
  • 투고 : 2017.06.26
  • 심사 : 2017.09.02
  • 발행 : 2017.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The out-of-plane response of infill walls has recently gained a growing attention and has been recognised fundamental in the damage assessment of reinforced concrete and steel framed buildings subjected to seismic loads. The observation of damage after earthquakes highlighted that out-of-plane collapse of masonry infills may occur even during seismic events of low or moderate intensity, causing both casualty risks and unfavourable situations affecting the overall structural response. Even though studies concerning the out-of-plane behaviour of infills are not as many as those focused on the in-plane response, in the last decades, a substantial number of researches have been carried out on the out-of-plane behaviour of infills. In this study, the out-of-plane response is investigated considering different aspects. First, damages observed after past earthquakes are examined, with the aim of identifying the main parameters involved and the most critical configurations. Secondly, the response recorded in about 150 experimental tests is deeply examined, focusing on the influence of geometrical characteristics, boundary conditions, prior in-plane damage, presence of reinforcing elements and openings. Finally, different theoretical capacity models and code provisions are discussed and compared, giving specific attention to those based on the arching theory. The reliability of some of these models is herein tested with reference to experimental results. The comparison between analytically predicted and experimental values allows to appreciate the extent of approximation of such methods.

키워드

과제정보

연구 과제 주관 기관 : Ministry of the Instruction, University and Research of Italy (MIUR)

참고문헌

  1. Abrams, D.P., Angel, R. and Uzarski, J. (1996), "Out of plane strength of unreinforced masonry infill panels", Earthq. Spectra, 12(4), 825-844. https://doi.org/10.1193/1.1585912
  2. Al-Chaar, G., Angel, R. and Abrams, D.P. (1994), "Dynamic testing of unreinforced brick masonry infills", Proceedings of Structures Congress XII, Atlanta, Georgia, American Society of Civil Engineers, Reston, Virginia.
  3. Anderson, C. (1984), "Arching action in transverse laterally loaded masonry wall panels", Struct. Eng., 62B(1), 12-23.
  4. Angel, R., Abrams, D.P., Shapiro, D., Uzarski, J. and Webster, M. (1994), "Behaviour of reinforced concrete frames with masonry infills", Structural Research Series No. 589, Department of Civil Engineering, University of Illinois, Urbana-Champaign.
  5. Asteris, P.G., Cavaleri, L., Di Trapani, F. and Sarhosis, V.A. (2016), "A macro-modelling approach for the analysis of infilled frame structures considering the effects of openings and vertical loads", Struct. Infrastr. Eng., 12(5), 551-566. https://doi.org/10.1080/15732479.2015.1030761
  6. Asteris, P.G., Cavaleri, L., Di Trapani, F. and Tsaris, A.K. (2017), "Numerical modelling of out-of-plane response of infilled frames: State of the art and future challenges for the equivalent strut macromodels", Eng. Struct., 132, 110-122. https://doi.org/10.1016/j.engstruct.2016.10.012
  7. Bashandy, T., Rubiano, N.R. and Klingner, R.E. (1995), "Evaluation and analytical verification of infilled frame test data", U.S.Army Construction Engineering Research Laboratories CECER-CT-BAA, Seismic Structural Engineering (FM-4), Engineering and Material Division, Champaign, IL.
  8. Braga, F., Manfredi, V., Masi, A., Salvatori, A. and Vona, M. (2011), "Performance of non-structural elements in RC buildings during the L'Aquila, 2009 earthquake", Bull. Earthq. Eng., 9, 307-324. https://doi.org/10.1007/s10518-010-9205-7
  9. Button, M.R. and Mayes, R.L. (1992), "Out-of-plane seismic response of reinforced masonry walls", J. Struct. Eng., 118, 2495-2513. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:9(2495)
  10. Calvi, G.M. and Bolognini, D. (2001), "Seismic response of reinforced concrete frames infilled with weakly reinforced masonry panels", J. Earthq. Eng., 5, 153-185.
  11. Cavaleri, L. and Di Trapani, F. (2014), "Cyclic response of masonry infilled RC frames: Experimental results and simplified modelling", Soil Dyn. Earthq. Eng., 65, 224-242. https://doi.org/10.1016/j.soildyn.2014.06.016
  12. Cavaleri, L., Di Trapani, F., Asteris, P.G. and Sarhosis, V. (2017), "Influence of column shear failure on pushover based assessment of masonry infilled reinforced concrete framed structures: A case study", Soil Dyn. Earthq. Eng., 100, 98-112. https://doi.org/10.1016/j.soildyn.2017.05.032
  13. Colangelo, F. (2005), "Pseudo-dynamic seismic response of reinforced concrete frames infilled with non-structural brick masonry", Earthq. Eng. Struct. Dyn., 34(10), 1219-1241. https://doi.org/10.1002/eqe.477
  14. Dafnis, A., Kolsch, H. and Reimerdes, H.G. (2002), "Arching in masonry walls subjected to earthquake motion", J. Struct. Eng., 128 153-159. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:2(153)
  15. Dawe, J.L. and Seah, C.K. (1989), "Out-of-plane resistance of concrete masonry infilled panels", Can. J. Civil Eng., 16, 854-864. https://doi.org/10.1139/l89-128
  16. Dazio, A. (2008), "Effect of boundary conditions on the out-ofplane behavior of unreinforced masonry walls", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
  17. Decanini, L.D., De Sortis, A., Liberatore, L. and Mollaioli, F. (2005), "Estimation of near-source ground motion and seismic behaviour of RC framed structures damaged by the 1999 Athens earthquake", J. Earthq. Eng., 9(5), 609-635. https://doi.org/10.1080/13632460509350559
  18. Decanini, L.D., Liberatore, L. and Mollaioli, F. (2012), "Damage potential of the 2009 L'Aquila, Italy, earthquake", J. Earthq. Tsunami, 6, 1-32.
  19. Decanini, L.D., Liberatore, L. and Mollaioli, F. (2014), "Strength and stiffness reduction factors for infilled frames with openings", Earthq. Eng. Eng. Vib., 13(3), 437-454. https://doi.org/10.1007/s11803-014-0254-9
  20. Di Trapani, F., Macaluso, G., Cavaleri, L. and Papia, M. (2015), "Masonry infills and RC frames interaction: literature overview and state of the art of macromodeling approach", Eur. J. Environ. Civil Eng., 19(9), 1059-1095. https://doi.org/10.1080/19648189.2014.996671
  21. Dolsek, M. and Fajfar, P. (2008), "The effect of masonry infills on the seismic response of four storey reinforced concrete frame-a deterministic assessment", Eng. Struct., 30(7), 1991-2001. https://doi.org/10.1016/j.engstruct.2008.01.001
  22. Drysdale, R.G. and Essawy, A.S. (1988), "Out-of-plane bending of concrete block walls", J. Struct. Eng., 114, 121-133. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:1(121)
  23. Eurocode 6 (2005), Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings Masonry Structures, European Committee for Standardization, Brussels, Belgium.
  24. Eurocode 8 (2004), Design of Masonry Structures. Part 1.1: Common Rules for Reinforced and Unreinforced Masonry Structures, European Committee for Standardization, Brussels, Belgium.
  25. FEMA 306 (1998), Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings-Basic Procedures Manual, ATC Applied Technology Council, Federal Emergency Management Agency, Washington D.C., USA.
  26. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, ASCE (American Society of Civil Engineers), Federal Emergency Management Agency, Washington D.C., USA.
  27. Flanagan, R.D. and Bennett, R.M. (1999a), "Bidirectional behavior of structural clay tile infilled frames", J. Struct. Eng., ASCE, 125(3), 236-244. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(236)
  28. Flanagan, R.D. and Bennett, R.M. (1999b), "In-plane behavior of structural clay tile infilled frames", J. Struct. Eng., ASCE, 125(6), 590-599. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(590)
  29. Flanagan, R.D. and Bennett, R.M. (1999c), "Arching of masonry infilled frames: comparison of analytical methods", Prac. Period. Struct. Des. Constr., 4(3), 105-110. https://doi.org/10.1061/(ASCE)1084-0680(1999)4:3(105)
  30. Flanagan, R.D. and Bennett, R.M., (1993), "Large-scale testing of structural clay tile infilled frames", Annual Conference of the Canadian Society of Civil Engineers, Fredericton, New Brunswick.
  31. Fricke, K.E., Jones, W.D. and Huff, T.E. (1992), "In situ lateral load testing of a URM HCT wall", Proceedings of the 6th Canadian Masonry Conference, Saskatoon Saskatchewan, Canada.
  32. Furtado, A., Rodrigues, H., Arede, A. and Varum, H. (2016), "Simplified macro-model for infill masonry walls considering the out-of-plane behavior", Earthq. Eng. Struct. Dyn., 45, 507-524. https://doi.org/10.1002/eqe.2663
  33. Haseltine, B.A., West, H.W.H. and Tutt, J.N. (1977), "Design of walls to resist lateral loads", Struct. Eng., 55(10), 422-430.
  34. Hashemi, A. and Mosalam, K.M. (2006), "Shake-table experiment on reinforced concrete structure containing masonry infill wall", Earthq. Eng. Struct. Dyn., 35(14), 1827-1852. https://doi.org/10.1002/eqe.612
  35. Hashemi, A. and Mosalam, K.M. (2007), "Seismic evaluation of reinforced concrete buildings including effects of masonry infill walls", PEER Report 2007/100. University of California, Berkeley.
  36. Henderson, R.C., Jones, W.D. and Porter, M.L. (1993), "Out-of-Plane and In-Plane Testing of URM Infills", Proceedings of The ASCE Structures Congress, Irvine, California, USA.
  37. Hendry, A.W. (1973), "The Lateral Strength of Unreinforced Brickwork", Struct. Eng., 51(2), 43-50.
  38. Hermanns, L., Fraile, A., Alarcon, E. and Alvarez, R. (2014), "Performance of buildings with masonry infill walls during the 2011 Lorca earthquake", Bull. Earthq. Eng., 12, 1977-1997. https://doi.org/10.1007/s10518-013-9499-3
  39. Inel, M., Ozmen, H.B. and Akyol, E. (2013), "Observations on the building damages after 19 May 2011 Simav (Turkey) earthquake", Bull. Earthq. Eng., 11, 255-283. https://doi.org/10.1007/s10518-012-9414-3
  40. Kadysiewski, S. and Mosalam, K.M. (2009), "Modeling of unreinforced masonry infill walls considering in-plane and outof-plane interaction", PEER Report 2008/102, University of California, Berkeley.
  41. Kakaletsis, D.J. and Karayannis, C.G. (2009), "Experimental investigation of infilled reinforced concrete frames with openings", ACI Struct. J., 102(2), 132-141.
  42. Komaraneni, S., Rai, D.C. and Singhal, V. (2011), "Seismic behavior of framed masonry panels with prior damage when subjected to out-of-plane loading", Earthq. Spectra, 27, 1077-1103. https://doi.org/10.1193/1.3651624
  43. Liberatore, L. and Decanini, L.D. (2011), "Effect of infills on the seismic response of high-rise RC buildings designed as bare according to Eurocode 8", Ingegneria Sismica, 28(3), 7-23.
  44. Liberatore, L., Bruno, M., Pasca, M. and Sorrentino, L. (2016), "Finite-discrete element modelling of masonry infill walls subjected to out-of-plane loads", Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, Crete Island, Greece, June, 5219-5229..
  45. Liberatore, L., Noto, F., Mollaioli, F. and Franchin, P (2017), "Comparative assessment of strut models for the modelling of in-plane seismic response of infill walls", Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), Rhodes, Greece, 5235-5248..
  46. Liberatore, L., Tocci, C. and Masiani, R. (2008), "Non linear analyses for the evaluation of seismic behaviour of mixed r.c.-masonry structures", Proceedings of the Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria, Reggio Calabria, Italy, AIP Conference Proceedings, 1020(1), 1211-1218.
  47. LS-DYNA Keyword User's Manual, LSTC (2013), Livermore, Livermore Software Technology Corporation.
  48. Mainstone, R.J. (1974), "Supplementary note on the stiffness and strength of infilled frames", CP 13/74, Building Research Station, UK.
  49. McDowell, E.L., McKee, K.E. and Sevin, E. (1956), "Arching theory of masonry walls", J. Struct. Div., 82, 915-1-915-18.
  50. Mehrabi, A.B. and Shing, P.B. (1997), "Finite element modelling of masonry-infilled RC frames", J. Struct. Eng., ASCE, 123(5), 604-613. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(604)
  51. Miyamoto, H.K., Gilani, A.S. and Wada, A. (2008), "Reconnaissance report of the 2008 Sichuan earthquake, damage survey of buildings and retrofit options", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
  52. Modena, C. and da Porto, F. (2005), "Ricerca sperimentale sul comportamento fuori piano di tamponamenti in muratura in zona sismica", Research Report, Draft 1, Department of Construction and Transportation, University of Padua, Italy. (in Italian)
  53. Mohammad Noh, N., Liberatore, L., Mollaioli, F. and Tesfamariam, S. (2017), "Modelling of masonry infilled RC frames subjected to cyclic loads: State of the art review and modelling with OpenSees", Eng. Struct., 150, 599-621. https://doi.org/10.1016/j.engstruct.2017.07.002
  54. Morandi, P., Hak, S. and Magenes, G. (2013), "Simplified out-ofplane resistance verification for slender clay masonry infills in RC frames", Proceedings of the 15th National Italian Conference on Seismic Engineering, Padua, Italy, June-July.
  55. Mosalam, K.M. and Gunay, S. (2015), "Progressive collapse analysis of RC frames with URM infill walls considering inplane/out-of-plane interaction", Earthq. Spectra, 31(2), 921-943. https://doi.org/10.1193/062113EQS165M
  56. NTC (2009), Istruzioni per L'applicazione Delle "Nuove norme Tecniche per le Costruzioni" di Cui al Decreto Ministeriale 14 Gennaio 2008, Ministero delle Infrastrutture e dei Trasporti, Circolare 2 Febbraio 2009, n. 617, Italy. (in Italian)
  57. NZSEE Recommendations (2006), Assessment and Improvement of the Structural Performance of Buildings in Earthquakes, New Zealand Society for Earthquake Engineering, Study Group on Earthquake Risk Buildings, Wellington, NZ.
  58. Pasca, M. and Liberatore, L. (2015), "Predicting models for the evaluation of out-of-plane ultimate load carrying capacity of masonry infill walls", Proceedings of ERES 2015 10th International Conference on Earthquake Resistant Engineering Strucutures,Abbazia, Croazia.
  59. Pereira, M.F.P., Pereira, M.F.N., Ferreira, J.E.D. and Lourenco, P.B. (2011), "Behavior of masonry infill panels in RC frames subjected to in plane and out of plane loads", Proceedings of the 7th International Conference AMCM 2011, Krakov, Poland.
  60. Saatcioglu, M., Mitchell, D., Tinawi, R., Gardner, N.J., Gillies, A.G., Ghobarah, A., Anderson, D.L. and Lau, D. (2001), "The August 17, 1999, Kocaeli (Turkey) earthquake-damage to structures", Can. J. Civil Eng., 28, 715-737.
  61. Shing, P.B., Cavaleri, L. and Di Trapani, F. (2016), "Prediction of the out-of-plane response of infilled frames under seismic loads by a new fiber-section macro-model", Proceedings of the 16th International Brick and Block Masonry Conference, IBMAC, 29/06-30/06 Padua, Italy.
  62. Sorrentino, L. and Masiani, R. (2003), "Dynamic out-of-plane behaviour of unreinforced masonry walls", Sixth International Symposium on Computer Methods in Structural Masonry, 22-24 September, Rome, Italy.
  63. Sorrentino, L., Liberatore, L., Liberatore, D. and Masiani, R. (2014), "The behaviour of vernacular buildings in the 2012 Emilia earthquakes", Bull. Earthq. Eng., 12(5), 2367-2382. https://doi.org/10.1007/s10518-013-9455-2
  64. Sorrentino, L., Masiani, R. and Benedetti, S. (2008a), "Experimental estimation of energy damping during free rocking of unreinforced masonry walls. First results", Proceedings of the Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria, Reggio Calabria, Italy, AIP Conference Proceedings, 1020(1), 1888-1895.
  65. Sorrentino, L., Masiani, R. and Griffith, M.C. (2008b), "The vertical spanning strip wall as a coupled rocking rigid body assembly", Struct. Eng. Mech., 29(4), 433-453. https://doi.org/10.12989/sem.2008.29.4.433
  66. Tarque, N., Candido, L., Camata, G. and Spacone, E. (2015), "Masonry infilled frame structures: state-of-the-art review of numerical modelling", Earthq. Struct., 8(3), 733-759. https://doi.org/10.12989/eas.2015.8.3.733
  67. Tasnimi, A.A. and Zomorodi, E. (2010), "The effect of onplane behavior on inplane interaction of URM infilled RC frame under lateral loads", Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, August-September.
  68. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill.
  69. Tu, Y.H., Chuang, T.H., Liu, P.M. and Yang, Y.S. (2010), "Out-ofplane shaking table tests on unreinforced masonry panels in RC frames", Eng. Struct., 32, 3925-3935. https://doi.org/10.1016/j.engstruct.2010.08.030
  70. Varela-Rivera, J., Moreno-Herrera, J., Lopez-Gutierrez, I. and Fernandez-Baqueiro, L. (2012), "Out-of-plane strength of confined masonry walls", J. Struct. Eng., 138, 1331-1341. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000578
  71. Varela-Rivera, J.L., Navarrete-Macias, D., Fernandez-Baqueiro, L.E. and Moreno, E.I. (2011), "Out-of-plane behaviour of confined masonry walls", Eng. Struct., 33(5), 1734-1741. https://doi.org/10.1016/j.engstruct.2011.02.012
  72. Varum, H., Furtado, A., Rodrigues, H., Dias-Oliveira, J., Vila-Pouca, N. and Arede, A. (2017), "Seismic performance of the infill masonry walls and ambient vibration tests after the Ghorka 2015 Nepal earthquake", Bull. Earthq. Eng., 15(3), 1185-1212. https://doi.org/10.1007/s10518-016-9999-z
  73. Walsh, K.Q., Dizhur, D.Y., Shafaei, J., Derakhshan, H. and Ingham, J.M. (2015), "In situ out-of-plane testing of unreinforced masonry cavity walls in as-built and improved conditions", Struct., 3, 187-199. https://doi.org/10.1016/j.istruc.2015.04.005

피인용 문헌

  1. Study of arching behaviour and strength of concrete masonry infills under out-of-plane loading vol.46, pp.10, 2019, https://doi.org/10.1139/cjce-2018-0662
  2. Numerical Investigation on the Influence of In-Plane Damage on the Out-of-Plane Behavior of Masonry Infill Walls vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/6276803
  3. Simplified seismic assessment of infilled RC frame structures vol.18, pp.4, 2020, https://doi.org/10.1007/s10518-019-00758-2
  4. Out-of-plane behavior of confined masonry walls with aspect ratios greater than one vol.48, pp.1, 2017, https://doi.org/10.1139/cjce-2019-0453
  5. Multi-Stripe Seismic Assessment of Precast Industrial Buildings With Cladding Panels vol.7, pp.None, 2017, https://doi.org/10.3389/fbuil.2021.631360
  6. Predicting the Out-Of-Plane Seismic Strength of Unreinforced Masonry Infill Walls vol.25, pp.9, 2021, https://doi.org/10.1080/13632469.2019.1604453
  7. Experiment-based out-of-plane resistance of strong masonry infills for codified applications vol.242, pp.None, 2017, https://doi.org/10.1016/j.engstruct.2021.112525