Smart Structures and Systems

  • 제20권6호
  • /
  • Pages.641-656
  • /
  • 2017
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of vertical component of near-field ground motions on seismic responses of asymmetric structures supported on TCFP bearings

  • 투고 : 2016.12.11
  • 심사 : 2017.11.25
  • 발행 : 2017.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of vertical component of earthquakes on torsional amplification due to mass eccentricity in seismic responses of base-isolated structures subjected to near-field ground motions are studied in this paper. 3-, 6- and 9-story superstructures and aspect ratios of 1, 2 and 3 have been modeled as steel special moment frames mounted on Triple Concave Friction Pendulum (TCFP) bearings considering different period and damping ratios. Three-dimensional linear superstructures resting on nonlinear isolators are subjected to both 2 and 3 component near-field ground motions. Effects of mass eccentricity and vertical component of 25 near-field earthquakes on the seismic responses including maximum isolator displacement and base shear as well as peak superstructure acceleration are studied. The results indicate that the effect of vertical component on the responses of asymmetric structures, especially on the base shear is significant. Therefore, it can be claimed that in the absence of the vertical component, mass eccentricity has a little effect on the base shear increase. Additionally, the impact of this component on acceleration is remarkable so the roof acceleration of a nine-story structure has been increased 1.67 times, compared to the case that the structure is subjected to only horizontal components of earthquakes.

키워드

참고문헌

  1. AISC (2010), "Seismic provisions for structural steel buildings", ANSI/AISC 341-10, American Institute of Steel Construction, Chicago, Illinois, USA.
  2. AISC (2010), "Specification for structural steel buildings", ANSI/AISC 360-10, American Institute of Steel Construction, Chicago, Illinois, USA.
  3. Almazan, J.L., De la llera, J.C. and Inaudi, J.A. (1998), "Modeling aspects of structures isolated with the frictional pendulum system", Earthq. Eng. Struct. D., 27(80), 845-867. https://doi.org/10.1002/(SICI)1096-9845(199808)27:8<845::AID-EQE760>3.0.CO;2-T
  4. Almazan, J.L. and De la llera, J.C. (2003), "Accidental torsion due to overturning in nominally symmetric structures isolated with the FPS", Earthq. Eng. Struct. D., 32, 919-948. https://doi.org/10.1002/eqe.255
  5. ASCE 7-10 (2010), "Minimum Design Loads for Building and Other Structures", ASCE/SEI 7-10, American Society of Civil Engineers, Reston, Virginia, USA.
  6. Ates, S. and Yurdakul, M. (2011), "Site-response effects on RC buildings isolated by triple concave friction pendulum bearings", Comput. Concrete, 8(6), 693=715. https://doi.org/10.12989/cac.2011.8.6.693
  7. Becker, T.C. and Mahin, S.A. (2012), "Experimental and analytical study of the bi-directional behavior of the triple friction pendulum isolator", Earthq. Eng. Struct. D., 41, 355-373. https://doi.org/10.1002/eqe.1133
  8. Becker, T.C. and Mahin, S.A. (2013), "Approximating peak responses in seismically isolated buildings using generalized modal analysis", Earthq. Eng. Struct. D., 42, 1807-1825. https://doi.org/10.1002/eqe.2299
  9. Constantinou, M.C., Kalpakidis, I., Filiatrault, A. and Ecker Lay, R.A. (2011), "LRFD-based analysis and design procedures for bridge bearings and seismic isolation", Technical Report MCEER-11-0004, State University of New York at Buffalo, Buffalo. New York, USA.
  10. Dao, N.D., Ryan, K.L., Sao, E. and Sasaki, T. (2013), "Predicting the displacement of triple pendulum bearings in a full-scale shaking experiment using a three-dimensional element", Earthq. Eng. Struct. D., 42, 1677-1695. https://doi.org/10.1002/eqe.2293
  11. De la llera, J.C. and Almazan, J.L. (2003), "An experimental study of nominally symmetric and asymmetric structures isolated with the FPS", Earthq. Eng. Struct. D., 32, 891-918. https://doi.org/10.1002/eqe.254
  12. De la llera, J.C. and Chopra, A.K. (1994), "Accidental torsion in buildings due to base rotational excitation", Earthq. Eng. Struct. D., 23, 1003-1021. https://doi.org/10.1002/eqe.4290230906
  13. Dicleli, M. and Buddaram, S. (2007), "Equivalent linear analysis of seismic-isolated bridges subjected to near-fault ground motions with forward rupture directivity effect", Eng. Struct., 29, 21-32. https://doi.org/10.1016/j.engstruct.2006.04.004
  14. Dicleli, M. (2007), "Supplemental elastic stiffness to reduce isolator displacements for seismic-isolated bridges in near-fault zones", Eng. Struct., 29, 763-775. https://doi.org/10.1016/j.engstruct.2006.06.013
  15. Fadi, F. and Constantinou, M.C. (2010), "Evaluation of simplified methods of analysis for structures with triple friction pendulum isolators", Earthq. Eng. Struct. D., 39(1), 5-22. https://doi.org/10.1002/eqe.930
  16. Fenz, D. and Constantinou, M.C. (2008a), "Mechanical behavior of multi-spherical sliding bearings", Technical Report No. MCEER-08/0007, State University of New York at Buffalo, Buffalo. New York, USA.
  17. Fenz, D. and Constantinou, M.C. (2008b), "Modeling triple friction pendulum bearings for response history analysis", Earthq. Spectra, 24, 1011-1028. https://doi.org/10.1193/1.2982531
  18. Jangid, R.S. and Datta, T.K. (1995), "Performance of base isolation systems for asymmetric building subjected to random excitation", Eng. Struct., 17(6), 443-454. https://doi.org/10.1016/0141-0296(95)00054-B
  19. Jangid, R.S. and Kelly, J.M. (2001), "Base isolation for near-fault motions", Earthq. Eng. Struct. D., 30, 691-707. https://doi.org/10.1002/eqe.31
  20. Jangid, R.S. (2005), "Optimum friction pendulum system for near-fault motions", Eng. Struct., 27, 349-359. https://doi.org/10.1016/j.engstruct.2004.09.013
  21. Khoshnoudian, F. and Ahmadi, E. (2013), "Effects of pulse period of near-field ground motions on the seismic demands of soil-MDOF structure systems using mathematical pulse models", Earthq. Eng. Struct. D., 42(11), 1565-1582. https://doi.org/10.1002/eqe.2287
  22. Khoshnoudian, F. and Imani Azad, A. (2011), "Effect of two horizontal components of earthquake on nonlinear response of torsionally coupled base isolated structures", Struct. Des. Tall Spec. Build.; 20, 986-1018. https://doi.org/10.1002/tal.571
  23. Khoshnoudian, F. and Rabiei, M. (2010), "Seismic response of double concave friction pendulum base-isolated structures considering vertical component of earthquake", Adv. Struct. Eng., 13(1), 1-13. https://doi.org/10.1260/1369-4332.13.1.1
  24. Khoshnoudian, F. and Rezai Haghdoost, V. (2009), "Responses of pure-friction sliding structures to three components of earthquake excitation considering variations in the coefficient of friction", Scientia Iranica, Transaction A: Civil Engineering, 16(6), 429-442.
  25. Kilar, V. and Koren, D. (2009), "Seismic behaviour of asymmetric base isolated structures with various distributions of isolators", Eng. Struct., 31, 910-921. https://doi.org/10.1016/j.engstruct.2008.12.006
  26. Loghman, V. and Khoshnoudian, F. (2015) "Comparison of seismic behavior of long period SDOF systems mounted on friction isolators under near-field earthquakes", Smart Structures and Systems, Accepted in Press.
  27. Loghman, V., Khosnoudian, F. and Banazadeh, M. (2015a), "Effects of vertical component of earthquake on seismic responses of triple concave friction pendulum base-isolated structures", J. Vib. Control, 21(11), 2099-2113. https://doi.org/10.1177/1077546313503359
  28. Loghman, V., Tajammolian, H. and Khosnoudian, F. (2015b), "Effects of rotational components of earthquakes on seismic responses of triple concave friction pendulum base- isolated structures", J. Vib. Control, DOI: 10.1177/1077546315594066.
  29. Masaeli, H., Khoshnoudian, F. and Hadikhan Tehrani, M. (2014), "Rocking isolation of nonductile moderately tall buildings subjected to bidirectional near-fault ground motions", Eng. Struct., 80, 298-315. https://doi.org/10.1016/j.engstruct.2014.08.053
  30. Morgan, T. and Mahin, S.A. (2010), "Achieving reliable seismic performance enhancement using multi-stage friction pendulum isolators", Earthq. Eng. Struct. D., 39, 1443-1461. https://doi.org/10.1002/eqe.1043
  31. Morgan, T.A. and Mahin, S.A. (2011), "The use of base isolation systems to achieve complex seismic performance objectives", Report No. PEER-2011/06, Pacific Earthquake Engineering Research Center (PEER), Berkeley, CA, USA.
  32. Panchal, V.R. and Jangid, R.S. (2008), "Variable friction pendulum system for near-fault ground motions", Struct. Control Health Monit., 15, 568-584. https://doi.org/10.1002/stc.216
  33. PEER (2013), "PEER ground motion database", development by the Pacific Earthquake Engineering Research Center (PEER), http://ngawest2.berkeley.edu
  34. Picazo, Y., Lopez, O.D. and Esteva, L. (2015), "Seismic reliability analysis of buildings with torsional eccentricities", Earthq. Eng. Struct. D., 44, 1219-1234. https://doi.org/10.1002/eqe.2509
  35. Rabiei, M. and Khoshnoudian, F. (2011), "Response of multi-story friction pendulum base-isolated buildings including the vertical component of earthquake", Canadian J. Civil Eng., 38, 1045-1059. https://doi.org/10.1139/l11-064
  36. Rabiei, M. and Khoshnoudian, F. (2013), "Seismic response of elevated liquid storage tanks using double concave friction pendulum bearings with tri-linear behavior", Adv. Struct. Eng., 16(2), 315-338. https://doi.org/10.1260/1369-4332.16.2.315
  37. Roussis, P.C. and Constantinou, M.C. (2006a), "Uplift-restraining friction pendulum seismic isolation system", Earthq. Eng. Struct. D., 35, 577-593. https://doi.org/10.1002/eqe.545
  38. Roussis, P.C. and Constantinou, M.C. (2006b), "Experimental and analytical studies of structures seismically isolated with an uplift-restraining friction pendulum system", Earthq. Eng. Struct. D., 35, 595-611. https://doi.org/10.1002/eqe.546
  39. Ryan, K.L. and Chopra, A.K. (2006), "Estimating bearing response in symmetric and asymmetric-plan isolated buildings with rocking and torsion", Earthq. Eng. Struct. D., 35, 1009-1036. https://doi.org/10.1002/eqe.569
  40. Sarlis, A.A. and Constantinou, M.C. (2013), "Model of triple friction pendulum bearing for general geometric and frictional parameters and for uplift conditions", Report No. MCEER-13-0010, State University of New York at Buffalo, Buffalo. New York, USA.
  41. Siringurino, D.M. and Fujino, Y. (2015), "Seismic response analyses of an asymmetric base-isolated building during the 2011 Great East Japan (Tohoku) Earthquake", Struct. Control Health Monit., 22, 71-90. https://doi.org/10.1002/stc.1661
  42. Tajammolian, H., Khoshnoudian, F., Talaei, S. and Loghman, V. (2014), "The effects of peak ground velocity of near-field ground motions on the seismic responses of base-isolated structures mounted on friction bearings", Earthq. Struct., 7(6), 1259-1282. https://doi.org/10.12989/eas.2014.7.6.1259
  43. Tajammolian, H., Khosnoudian, F. and Bokaeian, V. (2016b), "Seismic responses of asymmetric steel structures isolated with the TCFP subjected to mathematical near-fault pulse models", Smart Struct. Syst., 18(5), 931-953. https://doi.org/10.12989/sss.2016.18.5.931
  44. Tajammolian, H., Khosnoudian, F. and Partovi Mehr, N. (2016a), "Seismic responses of isolated structures with mass asymmetry mounted on TCFP subjected to near-fault ground motions", Int. J. Civil Eng., DOI: 10.1007/s40999-016-0047-9
  45. Tena-Colunga, A. and Escamilla-Cruz, J. (2007), "Torsional amplifications in asymmetric base isolated structures", Eng. Struct., 29(2), 237-247. https://doi.org/10.1016/j.engstruct.2006.03.036
  46. Tena-Colunga, A. and Gomez-Soberon, L. (2002), "Torsional response of base isolated structures due to asymmetries in the superstructure", Eng. Struct., 24, 1587-1599. https://doi.org/10.1016/S0141-0296(02)00102-5
  47. Tena-Colunga, A. and Zambrana-Rojas, C. (2006), "Dynamic torsion amplifications in asymmetric base isolated structures with an eccentric isolation system", Eng. Struct., 28(3), 72-83. https://doi.org/10.1016/j.engstruct.2005.07.003
  48. Yurdakul, M. and Ates, S. (2011), "Modeling of triple concave friction pendulum bearings for seismic isolation of buildings", Struct. Eng. Mech., 40(3), 315-334. https://doi.org/10.12989/sem.2011.40.3.315
  49. Zayas, V.A., Low, S.S., Bozzo, L. and Mahin, S.A. (1989), "Feasibility and performance studies on improving the earthquake resistance of new and existing buildings using the friction pendulum system", Report No. UCB/EERC-89/09, Earthquake Engineering Research Center, University of California Berkeley, Berkeley, CA, USA.
  50. Zayas, V.A., Low, S.S. and Mahin, S.A. (1987), "The SFP earthquake resisting system: experimental report", Report No. UCB/EERC-87/01, Earthquake Engineering Research Center, University of California Berkeley, Berkeley, CA, USA.

피인용 문헌

  1. Evaluation of seismic performance of rotational-friction slip dampers in near-field and far-filed earthquakes vol.21, pp.2, 2017, https://doi.org/10.12989/eas.2021.21.2.147