Steel and Composite Structures

  • 제25권5호
  • /
  • Pages.617-624
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Increase factor based on residual strength to assess progressive collapse

  • Mashhadi, Javad (Department of Civil Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman) ;
  • Saffari, Hamed (Department of Civil Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman)
  • 투고 : 2017.05.06
  • 심사 : 2017.09.05
  • 발행 : 2017.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

키워드

참고문헌

  1. ASCE. (2010), ASCE/SEI 7-10, Minimum design loads for buildings and other structures, Reston, VA.
  2. ASCE. (2013), ASCE/SEI 41-13, Seismic Evaluation and Retrofit of Existing Buildings, Reston, VA.
  3. Cassiano D., D'Aniello M. and Rebelo C. (2017), "Parametric finite element analyses on flush end-plate joints under column removal", J. Constr. Steel Res., 137, 77-92. https://doi.org/10.1016/j.jcsr.2017.06.012
  4. Cassiano, D., D'Aniello, M., Rebelo, C., Landolfo, R. and Silva, L. S. (2016), "Influence of seismic design rules on the robustness of steel moment resisting frames", Steel Compos. Struct., 21(3), 479-500. https://doi.org/10.12989/scs.2016.21.3.479
  5. Chen, C.H., Zhu, Y.F., Yao, Y. and Huang, Y. (2016), "Progressive collapse analysis of steel frame structure based on the energy principle", Steel Compos. Struct., 21(3), 553-571. https://doi.org/10.12989/scs.2016.21.3.553
  6. Gerasimidis, S., Deodatis, G., Kontoroupi, T. and Ettouney, M. (2015), "Loss-of-stability induced progressive collapse modes in 3D steel moment frames", Struct. Infrastruct. Eng., 11, 334-344. https://doi.org/10.1080/15732479.2014.885063
  7. GSA. (2003), General Services Administration, Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects, Washington, DC.
  8. Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A. (2008), "Progressive collapse of multi-storey buildings due to sudden column loss - Part I: Simplified assessment framework", Eng. Struct., 30(5), 1308-1318. https://doi.org/10.1016/j.engstruct.2007.07.011
  9. Larijani, R.J., Nasserabadi, D.H. and Aghayan, I. (2017), "Progressive collapse analysis of buildings with concentric and eccentric braced frames", Struct. Eng. Mech., 61(6), 755-763. https://doi.org/10.12989/sem.2017.61.6.755
  10. Liu (Max), M. and Pirmoz, A. (2016), "Energy-based pulldown analysis for assessing the progressive collapsepotential of steel frame buildings", Eng. Struct., 123, 372-378. https://doi.org/10.1016/j.engstruct.2016.05.020
  11. Liu C., Tan K.H. and Fung T.C. (2013), "Dynamic behaviour of web cleat connections subjected to sudden column removal scenario", J. Constr. Steel Res., 86, 92-106. https://doi.org/10.1016/j.jcsr.2013.03.020
  12. Liu M. (2015), "Pulldown analysis for progressive collapse assessment", J. Perform. Constr. Fac., 29, 04014027. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000459
  13. Liu, M. (2013), "A new dynamic increase factor for nonlinear static alternate path analysis of building frames against progressive collapse", Eng. Struct., 48, 666-673. https://doi.org/10.1016/j.engstruct.2012.12.011
  14. Málaga-Chuquitaype, C., Elghazouli, A.Y. and Enache, R. (2016), "Contribution of secondary frames to the mitigation of collapse in steel buildings subjected to extreme loads", Struct. Infrastruct. Eng., 12, 45-60. https://doi.org/10.1080/15732479.2014.994534
  15. Mashhadi, J. and Saffari, H. (2016), "Effects of damping ratio on dynamic increase factor in progressive collapse", Steel Compos. Struct., 22, 677-690. https://doi.org/10.12989/scs.2016.22.3.677
  16. Mashhadi, J. and Saffari, H. (2017), "Modification of dynamic increase factor to assess progressive collapse potential of structures", J. Constr. Steel Res., 138, 72-78. https://doi.org/10.1016/j.jcsr.2017.06.038
  17. McKay, A., Marchand, K. and Diaz, M. (2012), "Alternate path method in progressive collapse analysis: variation of dynamic and nonlinear load increase factors", Pract. Period. Struct. Des. Constr., ASCE , 17(4), 152-160. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000126
  18. Mirtaheri, M. and Zoghi, M. (2016), "Design guides to resist progressive collapse for steel structures", Steel Compos. Struct., 20(2), 357-378. https://doi.org/10.12989/scs.2016.20.2.357
  19. Mohajeri, N.F., Usefi, N. and Rashidian, O. (2016), "A new method for progressive collapse analysis of RC frames", Struct. Eng. Mech., 60(1), 31-50. https://doi.org/10.12989/sem.2016.60.1.031
  20. Ruth, P., Marchand, K.A. and Williamson, E.B. (2006), "Static equivalency in progressive collapse alternate path analysis: reducing conservatism while retaining structural integrity", J. Perform. Constr. Fac., 20(4), 349-364. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(349)
  21. SAP2000 Nonlinear, Version 14.2, (2010), Structural Analysis Program, Computers and Structures Inc., Berkeley, CA.
  22. Stevens, D.J., Crowder, B., Hall, B. and Marchand, K. (2008), "Unified progressive collapse design requirements for DoD and GSA", Proceedings of the Structures Congress, Vancouver, Canada, April.
  23. Szyniszewski, S. and Krauthammer, T. (2012), "Energy flow in progressive collapse of steel framed buildings", Eng. Struct., 42, 142-153. https://doi.org/10.1016/j.engstruct.2012.04.014
  24. Tian, L.M., Wei, J.P., Hao, J.P. and Wang, X.T. (2017), "Dynamic analysis method for the progressive collapse of long-span spatial grid structures", Steel Compos. Struct., 23(4), 435-444 https://doi.org/10.12989/scs.2017.23.4.435
  25. UFC 4-023-03 (2013), United States Department of Defense, United facilities criteria design of buildings to resist progressive collapse, Washington (DC).
  26. Xu, G. and Ellingwood, B. R. (2011), "An energy-based partial pushdown analysis procedure for assessment of disproportionate collapse potential", J. Constr. Steel Res., 67, 547-555. https://doi.org/10.1016/j.jcsr.2010.09.001

피인용 문헌

  1. Simplified robustness assessment of steel framed structures under fire-induced column failure vol.35, pp.2, 2017, https://doi.org/10.12989/scs.2020.35.2.199