Steel and Composite Structures

  • 제25권5호
  • /
  • Pages.571-579
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Constant amplitude fatigue test of high strength bolts in grid structures with bolt-sphere joints

  • Yang, Xu (College of Architecture and Civil Engineering, Taiyuan University of Technology) ;
  • Lei, Honggang (College of Architecture and Civil Engineering, Taiyuan University of Technology)
  • 투고 : 2017.03.15
  • 심사 : 2017.08.29
  • 발행 : 2017.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The grid structure with bolt-sphere joints is widely adopted by industrial plants with suspending crane. The alternating reciprocating action of the suspending crane will cause fatigue problems of the grid structure with bolt-sphere joints with respect to the rod, the cone, the sealing plate, the bolt ball and the high strength bolt; while the fatigue of the high strength bolt is the key issue of fatigue failure. Based on efficient and smooth loading equipment with the AMSLER fatigue testing machine, this paper conducted a constant amplitude fatigue test on 18 M20 and 14 M30 high strength bolts with 40Cr material, and obtained 19 valid failure points, 9 unspoiled points with more than 2 million cycles, and 4 abnormal failure points. In addition, it established the constant amplitude fatigue design method, ${[{\Delta}{\sigma}]_{{2{\times}10}}{^6=58.91MPa}$, and analyzed the stress concentration and the fatigue fracture of high strength bolts. It can be explained that the geometrical stress concentration of high-strength bolt caused by spiral burr is severe.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Ba, S. (2014), "Repair of an aircraft hangar space truss design", Comput. Knowledge Technol., 10(20). (in Chinese)
  2. Berto, F., Mutignani, F. and Guido, E. (2016), "Effect of hot dip galvanization on the fatigue behaviour of steel bolted connections", Int. J. Fatigue, 93, 168-172. https://doi.org/10.1016/j.ijfatigue.2016.08.022
  3. D'Aniello, M., Cassiano, D. and Landolfo, R. (2016), "Monotonic and cyclic inelastic tensile response of European preloadable gr10.9 bolt assemblies", J. Constr. Steel Res., 124, 77-90. https://doi.org/10.1016/j.jcsr.2016.05.017
  4. de Jesus, A.M.P., Da Silva, A.L.L. and Correia, J.A.F.O. (2015), "Fatigue of riveted and bolted joints made of puddle iron-An experimental approach", J. Constr. Steel Res., 104, 81-90. https://doi.org/10.1016/j.jcsr.2014.10.012
  5. Feng, X. and Lin, X. (1995), "Fatigue performance under suspension crane action of bolt ball grid nodes", J. Build. Struct., 16(4), 3-12. (in Chinese)
  6. GB50017 (2003), Code for Design of Steel Structures, Beijing, China.
  7. GB700 (2006), Carbon Structural Steels, Beijing, China.
  8. Ghorbani, H., Chakherlou, T.N. and Taghizadeh, H. (2016), "On the estimation of fatigue life in bolt clamped Al-alloy 2024-T3 plates", Eng. Fract. Mech., 164, 74-92. https://doi.org/10.1016/j.engfracmech.2016.07.001
  9. Guo, X., Zhang, Y., Xiong, Z. and Xiang, Y. (2016), "Load- bearing capacity of occlusive high-strength bolt connections", J. Constr. Steel Res., 127, 1-14. https://doi.org/10.1016/j.jcsr.2016.07.015
  10. JG/T 10 (2009), Bolted Spherical Node of Space Grid Structures, Beijing, China.
  11. JGJ7 (2010), Technical Specification for Space Frame Structures, Beijing, China.
  12. Jiao, J. (2013), "The theoretical and experimental research on fatigue performance of crossed plate-welded hollow spherical connection in plate-type grid structure", Ph.D. Dissertation, Taiyuan University of Technology, China.
  13. Juoksukangas, J., Lehtovaara, A. an Ntyl, A. (2016), "Experimental and numerical investigation of fretting fatigue behavior in bolted joints", Tribol. Int., 103, 440-448. https://doi.org/10.1016/j.triboint.2016.07.021
  14. Lei, H. (2008), "The theoretical and experimental research on fatigue performance of high strength bolt connection in grid structure with bolt sphere joint", Ph.D. Dissertation, Taiyuan University of Technology, China.
  15. Noda, N.A., Chen, X., Sano, Y., Wahab, M.A., Maruyama, H., Fujisawa, R. and Takase, Y. (2016), "Effect of pitch difference between the bolt-nut connections upon the anti-loosening performance and fatigue life", Mater. Design, 96, 476-489. https://doi.org/10.1016/j.matdes.2016.01.128
  16. Tizani, W., Rahman, N.A. and Pitrakkos, T. (2014), "Fatigue life of an anchored blind-bolt loaded in tension", J. Constr. Steel Res., 93, 1-8. https://doi.org/10.1016/j.jcsr.2013.10.002
  17. Wang, Z., Wang, Q., Xue, H. and Liu, X. (2016), "Low cycle fatigue response of bolted T-stub connections to HSS columns - Experimental study", J. Constr. Steel Res., 119, 216-232. https://doi.org/10.1016/j.jcsr.2015.12.009
  18. Xu, G. and Cui, J. (1994), "Grid structure fatigue and fatigue life calculation", J. Build. Struct., 15(2), 25-34. (in Chinese)
  19. Zafari, B., Qureshi, J., Mottram J.T. and Rusev, R. (2016), "Static and fatigue performance of resin injected bolts for a slip and fatigue resistant connection in FRP bridge engineering", Structures, 7, 71-84. https://doi.org/10.1016/j.istruc.2016.05.004
  20. Zhu, D., Pei, Y., Xu, R., Tang, H., Zeng, D. and Zhao, T. (2008), "Design and research on the long-span structure of Beijing A380 hangar", China Civil Eng. J., 41(2), 1-8. (in Chinese)