Steel and Composite Structures

  • 제25권6호
  • /
  • Pages.727-734
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strength and stiffness of cold-formed steel portal frame joints using quasi-static finite element analysis

  • Mohammadjani, Chia (Department of Civil Engineering and Environmental Engineering, The University of Auckland) ;
  • Yousefi, Amir M. (Department of Civil Engineering and Environmental Engineering, The University of Auckland) ;
  • Cai, Shu Qing (Department of Civil Engineering and Environmental Engineering, The University of Auckland) ;
  • Clifton, G. Charles (Department of Civil Engineering and Environmental Engineering, The University of Auckland) ;
  • Lim, James B.P. (Department of Civil Engineering and Environmental Engineering, The University of Auckland)
  • 투고 : 2017.05.31
  • 심사 : 2017.09.19
  • 발행 : 2017.12.30
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes a quasi-static finite element analysis, which uses the explicit integration method, of the apex joint of a cold-formed steel portal frame. Such cold-formed steel joints are semi-rigid as a result of bolt-hole elongation. Furthermore, the channel-sections that are being connected have a reduced moment capacity as a result of a bimoment. In the finite element model described, the bolt-holes and bolt shanks are all physically modelled, with contact defined between them. The force-displacement curves obtained from the quasi-static analysis are shown to be similar to those of the experimental test results, both in terms of stiffness as well as failure load. It is demonstrated that quasi-static finite element analysis can be used to predict the behavior of cold-formed steel portal frame joints and overcome convergence issues experienced in static finite element analysis.

키워드

참고문헌

  1. ABAQUS (2014), Analysis User's Manual-Version 6.14-2 ABAQUS Inc., USA.
  2. Biggs, K.A., Ramseyer, C., Ree, S., and Kang, T.H.K. (2015), "Experimental testing of cold-formed built-up members in pure compression", Steel Compos. Struct., 18(6), 1331-1351. https://doi.org/10.12989/scs.2015.18.6.1331
  3. BS5950: Part 5 (1998), Code of practice for design of cold-formed sections, London, British Standards Institution.
  4. Kwon, Y.B., Kim, G.D. and Kwon, I.K. (2014), "Compression tests of cold-formed channel sections with perforations in the web", Steel Compos. Struct., 16(6), 657-679. https://doi.org/10.12989/scs.2014.16.6.657
  5. Lim, J.B.P. and Nethercot, D.A. (2003), "Ultimate strength of bolted moment connections between cold-formed steel members", Thin Wall. Struct., 41(11), 10-19.
  6. Lim, J.B.P., Hancock, G.J., Clifton, G.C, Pham, C.H. and Das, R. (2016), "DSM for ultimate strength of bolted momentconnections between cold-formed steel channel members", J. Constr. Steel Res., 117, 196-203. https://doi.org/10.1016/j.jcsr.2015.10.005
  7. Liu, Q., Yang, J. and Wang, F. (2015), "Numerical simulation of sleeve connections for cold formed steel sigma sections", Eng. Struct., 100, 686-695. https://doi.org/10.1016/j.engstruct.2015.06.056
  8. Natario, P., Silvestre, N. and Camotim, D. (2014a), "Web crippling failure using quasi-static FE models", Thin Wall. Struct., 84, 34-49. https://doi.org/10.1016/j.tws.2014.05.003
  9. Natario, P., Silvestre, N. and Camotim, D. (2014b), "Computational modelling of flange crushing in cold-formed steel section", Thin Wall. Struct., 84, 393-405. https://doi.org/10.1016/j.tws.2014.07.006
  10. Ozturk, F. and Pul, S. (2015), "Experimental and numerical study on a full scale apex connection of cold-formed steel portal frames", Thin Wall. Struct., 94, 79-88. https://doi.org/10.1016/j.tws.2015.04.004
  11. Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Lawson, R.M., Xu, Y., Martin, S. and Sha, W. (2013), "Effect of serviceability limits on optimal design of steel portal frames", J. Constr. Steel Res., 86, 74-84. https://doi.org/10.1016/j.jcsr.2013.03.001
  12. Qin, Y. and Chen, Z. (2016), "Research on cold-formed steel connections: a state-of-the-art review", Steel Compos. Struct., 20(1), 21-41. https://doi.org/10.12989/scs.2016.20.1.021
  13. Sabbagh, A.B., Petkovic, M., Pilakoutas, K. and Mirghaderi, R. (2013), "Cyclic behaviour of bolted cold-formed steel moment connections: FE modelling including slip", J. Constr. Steel Res., 80, 100-108. https://doi.org/10.1016/j.jcsr.2012.09.010
  14. Sabbagh, A.B., Petkovic, M., Pilakoutas, K. and Mirghaderi, R. (2012), "Experimental work on cold-formed steel elements for earthquake resilient moment frame buildings", Eng. Struct., 42, 371-386. https://doi.org/10.1016/j.engstruct.2012.04.025
  15. Wrzesien, A.M., Lim, J.B.P., Xu, Y., MacLeod, I.A. and Lawson, R.M. (2015) Effect of stressed skin action on the behaviour of cold-formed steel portal frames , Eng. Struct., 105, 123-136. https://doi.org/10.1016/j.engstruct.2015.09.026
  16. Yousefi, A.M., Lim, J.B.P. and Clifton G.C. (2017a), "Coldformed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition-Part I: Tests and finite element model validation", Thin Wall. Struct., 116, 333-341. https://doi.org/10.1016/j.tws.2017.03.026
  17. Yousefi, A.M., Lim, J.B.P. and Clifton G.C. (2017b), "Coldformed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition-Part II: Parametric study and design equations", Thin Wall. Struct., 116, 342-356. https://doi.org/10.1016/j.tws.2017.03.025
  18. Zhang, X., Rasmussen, K.J.R. and Zhang, H. (2015), "Structural modelling of cold-formed steel portal frames", Struct., 4, 58-68. https://doi.org/10.1016/j.istruc.2015.10.010
  19. Zhang, X., Rasmussen, K.J.R. and Zhang, H. (2016), "Experimental investigation of locally and distortionally buckled portal frames", J. Constr. Steel Res., 122, 571-583. https://doi.org/10.1016/j.jcsr.2016.04.017
  20. Zhou, W. and Jiang, L. (2017), "Distortional buckling of coldformed lipped channel columns subjected to axial compression", Steel Compos. Struct., 23(3), 331-338. https://doi.org/10.12989/scs.2017.23.3.331

피인용 문헌

  1. Relationship between applied force and magnetic field in a pseudo-static test of a portal frame vol.66, pp.1, 2017, https://doi.org/10.3233/jae-190135