DOI QR코드

DOI QR Code

Analytical solution and experimental study of membrane penetration in triaxial test

  • Ji, Enyue (Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University) ;
  • Zhu, Jungao (Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University) ;
  • Chen, Shengshui (Key Laboratory of Failure Mechanism and Safety Control Techniques of Earth-Rock Dam of the Ministry of Water Resources, Nanjing Hydraulic Research Institute) ;
  • Jin, Wei (Chengdu Engineering Corporation Limited)
  • 투고 : 2017.01.13
  • 심사 : 2017.05.18
  • 발행 : 2017.12.25

초록

Membrane penetration is the most important factor influencing the measurement of volume change for triaxial consolidated-drained shear test for coarse-grained soil. The effective pressure p, average particle size $d_{50}$, thickness $t_m$ and elastic modulus $E_m$ of membrane, contact area between membrane and soil $A_m$ as well as the initial void ratio e are the major factors influencing membrane penetration. According to the membrane deformation model given by Kramer and Sivaneswaran, an analytical solution of the membrane penetration considering the initial void ratio is deduced using the energy conservation law. The basic equations from theory of plates and shells and the elastic mechanics are employed during the derivation. To verify the presented solution, isotropic consolidation tests of a coarse-grained soil are performed by using the method of embedding different diameter of iron rods in the triaxial samples, and volume changes due to membrane penetration are obtained. The predictions from presented solution and previous analytical solutions are compared with the test results. It is found that the prediction from presented analytical solution agrees well with the test results.

키워드

과제정보

연구 과제 주관 기관 : NSFC

참고문헌

  1. Ali, S.R., Pyrah, I.C. and Anderson, W.F. (1995), "A novel technique for evaluation of membrane penetration", Geotech., 45(3), 545-548. https://doi.org/10.1680/geot.1995.45.3.545
  2. Baldi, G. and Nova, R. (1984), "Membrane penetration effects in triaxial testing", J. Geotech. Eng., 110(3), 403-420. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:3(403)
  3. Bohac, J. and Feda, J. (1992), "Membrane penetration in triaxial tests", Geotech. Test. J., 15(3), 288-294. https://doi.org/10.1520/GTJ10026J
  4. Bopp, P.A. and Lade, P.V. (2005), "Relative density effects on undrained sand behavior at high pressures". Soils Found., 45(1), 15-26 https://doi.org/10.3208/sandf.45.15
  5. Cheng, X.L. and Wang, J.H. (2016), "An elastoplastic bounding surface model for the cyclic undrained behaviour of saturated soft clays", Geomech. Eng., 11(3), 325-343. https://doi.org/10.12989/gae.2016.11.3.325
  6. Frydman, S., Zeitlen, J.G. and Alpan, I. (1973), "The membrane effect in triaxial testing of granular soils", J. Test. Eval., 1(1), 37-41. https://doi.org/10.1520/JTE11599J
  7. Haeri, S.M., Raeesi, R. and Shahcheraghi, S.A. (2016), "Elimination of membrane compliance using fine sandy coating on gravelly soil specimens", Proceedings of the 5th International Conference on Geotechnical Engineering and Soil Mechanics, Tehran, Iran, November.
  8. Kiekbusch, M. and Schuppener, B. (1977), "Membrane penetration and its effect on pore pressures", J. Soil Mech. Found. Div., 103(11), 1267-1279.
  9. Komurlu, E., Kesimal, A. and Demir, S. (2016), "Experimental and numerical analyses on determination of indirect (splitting) tensile strength of cemented paste backfill materials under different loading apparatus", Geomech. Eng., 10(6), 775-791. https://doi.org/10.12989/gae.2016.10.6.775
  10. Kramer, S.L. and Sivaneswaran, N. (1989), "A nondestructive, specimen-specific method for measurement of membrane penetration in the triaxial tests", Geotech. Test. J., 12(1), 50-59. https://doi.org/10.1520/GTJ10674J
  11. Kramer, S.L., Sivaneswaran, N. and Davis, R.O. (1990), "Analysis of membrane penetration in triaxial test", J. Eng. Mech., 116(4),773-789. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:4(773)
  12. Lade, P.V. (2016), Triaxial Testing of Soils, John Wiley & Sons, West Sussex, U.K.
  13. Molenkamp, F. and Luger, H.J. (1981), "Modelling and minimization of membrane penetration effects in tests on granular soils", Geotech., 31(4), 471-486. https://doi.org/10.1680/geot.1981.31.4.471
  14. Newland, P.L. and Allely, B.H. (1957), "Volume changes in drained taixial tests on granular materials", Geotech., 7(1), 17-34. https://doi.org/10.1680/geot.1957.7.1.17
  15. Noor, M.J.M., Nyuin, J.D. and Derahman, A. (2012), "A graphical method for membrane penetration in triaxial tests on granular soils", J. Inst. Eng., 73(1), 23-30.
  16. Omar, T. and Sadrekarimi, A. (2014), "Effects of multiple corrections on triaxial compression testing of sands", J. GeoEng., 9(2), 75-83.
  17. Raghunandan, M.E., Juneja, A. and Hsiung, B. (2013), "Preparation of reconstituted sand samples in the laboratory", J. Geotech. Eng., 6(1), 125-131.
  18. Raghunandan, M.E., Sharma, J.S. and Pradhan, B. (2015), "A review on the effect of rubber membrane in triaxial tests", Arab. J. Geosci., 8(5), 3195-3206. https://doi.org/10.1007/s12517-014-1420-0
  19. Reddy, J.N. (2006), Theory and Analysis of Elastic Plates and Shells, Taylor and Francis Group, New York, U.S.A.
  20. Roscoe, K.H., Schofield, A.N. and Thurairajah, A. (1964), An Evaluation of Test Data for Selecting a Yield Criterion for Soils, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  21. Sun, Y.Z., Shao, L.T., Wang, Z.P. and Wang, Q.M. (2006). "Study on membrane penetration in sandy soil specimens based on digital image measurement system", J. Rock Mech. Eng., 25(3), 618-622.
  22. Timoshenko, S.P. and Goodier, J.N. (1970), Theory of Elasticity, McGraw-Hill, Tokyo, Japan.
  23. Zhang, B.Y., Lv, M.Z. and Gao, L.S. (2003), "Correction of membrane penetration in large-scale triaxial tests for granular materials", Wat. Res. Hydropow. Eng., 34(2), 30-33.