DOI QR코드

DOI QR Code

Determination of structural performance of 3D steel pipe rack suspended scaffolding systems

  • Arslan, Guray (Department of Civil Engineering, Yildiz Technical University) ;
  • Sevim, Baris (Department of Civil Engineering, Yildiz Technical University) ;
  • Bekiroglu, Serkan (Department of Civil Engineering, Yildiz Technical University)
  • Received : 2017.06.01
  • Accepted : 2017.10.28
  • Published : 2017.12.10

Abstract

This study investigates the structural performance of 3D steel pipe rack suspended scaffolding systems. For the purpose, a standard full scale 3D steel pipe rack suspended scaffolding system considering two frames, two plane trusses, purlins and wooden floor is constructed in the laboratory. A developed load transmission system was placed in these experimental systems to distribute single loads to the center of a specific area in a step-by-step manner using a load jack. After each load increment, the displacements are measured by means of linear variable differential transducers placed in several critical points of the system. The tests are repeated for five different system conditions to determine the structural performance. The means of system conditions is the numbers of the tie bars which are used to connect plane trusses under level. Finite elements models of the 3D steel pipe rack suspended scaffolding systems considering different systems conditions are constituted using SAP2000 software to support the experimental tests and to use the models in future studies. Each of models including load transmission platform is analyzed under a single loading and the displacements are obtained. In addition, to calibrate the numerical models some uncertain parameters such as elasticity modulus of wooden floor and connection rigidity of purlins to plane trusses are assessed experimentally. The results of this work demonstrate that when increasing numbers of tie bars the displacement values are decreased. Also the results obtained from developed numerical models have harmony with those of experimental. In addition, the scaffolding system with two tie bars at the beginning and at the end of the plane truss has the optimum structural performance compared the results obtained for other scaffolding system conditions.

Keywords

References

  1. Altunişik, A.C. and Kalkan, E. (2016), "Investigation of earthquake angle effect on the seismic performance of steel bridges", Steel Compos. Struct., 22(4), 855-874. https://doi.org/10.12989/scs.2016.22.4.855
  2. Arslan, G., Sevuk, F. and Ekiz, İ. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Constr. Build. Mater., 22, 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  3. Beale, R.G. (2014), "Scaffold research-A review", J. Constr. Steel Res., 98, 188-200. https://doi.org/10.1016/j.jcsr.2014.01.016
  4. Bekiroglu, S., Arslan, G. and Sevim, B. (2016). "A new developed approach for EDL induced from a single concentrated force", Steel Compos. Struct., 21(5), 1105-1119. https://doi.org/10.12989/scs.2016.21.5.1105
  5. Chunyang, L.U. and Junli, L.U. (2011), "Effect of joint stiffness on behavior of bowl-scaffold used in Shanghai-Nanjing high speed railway overpass", Third International Conference on Transportation Engineering (ICTE).
  6. Collins, R., Zhang, S., Kim, K. and Teizer, J. (2014), "Integration of safety risk factors in BIM for scaffolding construction", 2014 International Conference on Computing in Civil and Building Engineering.
  7. Davani, MR., Hatami, S. and Zare, A. (2016), "Performance-Based evaluation of strap-braced cold-formed steel frames using incremental dynamic analysis", Steel Compos. Struct., 21(6), 1369-1388. https://doi.org/10.12989/scs.2016.21.6.1369
  8. Erdem, R.T. (2015), "Non-Linear performance analysis of existing and concentric braced steel structures", Steel Compos. Struct., 19(1), 59-74. https://doi.org/10.12989/scs.2015.19.1.059
  9. Hill, H.J., Searer, G.R., Dethlefs, R.A., Lewis, J.E. and Paret, T.F. (2010), "Designing suspended scaffold structural support elements and lifeline anchorages in conformance with federal OSHA requirements", Pract. Period. Struct. Des. Constr., ASCE, 15, 186-193. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000051
  10. Kaveh, A., Ahani, M.K. and Farzam, M.F. (2014), "Life-cycle cost optimization of steel moment-frame structures: performance-based seismic design approach", Earthq. Struct., 7(3), 271-294. https://doi.org/10.12989/eas.2014.7.3.271
  11. Kaveh, A., Farzam, M.F. and Ahani, M.K. (2015), "Optimum design of steel frame structures considering construction cost and seismic damage", Smart Struct. Syst., 16(1), 1-26. https://doi.org/10.12989/sss.2015.16.1.001
  12. Khudeira, S. (2008), "Scaffolding: Safety, design, and construction issues", Pract. Period. Struct. Des. Constr., ASCE, 13, 109-110. https://doi.org/10.1061/(ASCE)1084-0680(2008)13:3(109)
  13. Lian, M., Su, M. and Gua, Y. (2015), "Seismic performance of eccentrically braced frames with high strength steel combination", Steel Compos. Struct., 18(6), 1517-1539. https://doi.org/10.12989/scs.2015.18.6.1517
  14. Ng, Y.H., Shanmugam, N.E. and Liew, J.Y.R. (2012), "experimental studies on composite haunch beams", J. Constr. Steel Res., 75, 160-168. https://doi.org/10.1016/j.jcsr.2012.03.016
  15. Ö zcan, D.M., Bayraktar, A., Sahin, A., Haktanir, T. and Turker, T. (2009), "Experimental and finite element analysis on the steel fiber-reinforced concrete (SFRC) beams ultimate behavior", Constr. Build. Mater., 23(2), 1064-1077. https://doi.org/10.1016/j.conbuildmat.2008.05.010
  16. Peng, J.L., Yen, T., Lin, Y., Wu, K.L. and Chen, W.F. (1997), "Performance of scaffold frame shoring under pattern loads and load paths", Journal of Construction Engineering and Management, 123, 138-145. https://doi.org/10.1061/(ASCE)0733-9364(1997)123:2(138)
  17. Pisheh, Y.P., Shafiei, H.R. and Hatambeigi, M. (2009) "A case study of failure due to inappropriate usage of forming scaffold system", Forensic Engineering 2009: Pathology of the Built Environment.
  18. Romero, R.J.C., Rubio, M.C. and García-Hernández, C. (2013), "Analysis of construction equipment safety in temporary work at height", J. Constr. Eng. Manage., ASCE, 139, 9-14. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000567
  19. Rubio, M.C., Menendez, A., Rubio, J.C. and Martínez, G. (2005), "Obligations and responsibilities of civil engineering for the prevention of labor risks: References to European regulations", J. Prof. Iss. Eng. Edu. Pract., 131(1), 70-75. https://doi.org/10.1061/(ASCE)1052-3928(2005)131:1(70)
  20. SAP2000 (2017), Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc., Berkeley, California, USA.
  21. Sevim, B., Bekiroğlu, S. and Arslan, G. (2017), "Experimental evaluation of tie bar effects on the structural behavior of suspended scaffolding systems", Int. J. Adv. Steel Construct., 13(1), 62-77.
  22. Toole, T.M. (2005), "Increasing engineers' role in construction safety: opportunities and barriers", J. Prof. Iss. Eng. Edu. Pract., 131(3), 199-207. https://doi.org/10.1061/(ASCE)1052-3928(2005)131:3(199)
  23. TS EN 12811-3 (2005), Temporary works equipment - Part 3: Load Testing, Institute of Turkish Standards, Ankara, Turkey.
  24. TSE EN 12810-1 (2005), Façade scaffolds made of prefabricated components -Part 1: Products specifications, Institute of Turkish Standards, Ankara, Turkey.
  25. TSE EN 12810-2 (2005), Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design, Institute of Turkish Standards, Ankara, Turkey.
  26. TSE EN 12811-1 (2005), Temporary works equipment - Part 1: Scaffolds -Performance requirements and general design, Institute of Turkish Standards, Ankara, Turkey.
  27. TSE EN 12811-2 (2005), Temporary works equipment - Part 2: Information on materials, Institute of Turkish Standards, Ankara, Turkey.
  28. Url-1 (2017), http://www.seegerweiss.com/personal- injury/workplace-injuries/construction-accidents/scaffolding-accidents. 20.05.2017.
  29. Url-2 (2017), http://www.chemicalplantsafety.net/construction- safety/scaffold-accident-statistic-the-unspoken-warning/. 20.05.2017.
  30. Url-3 (2017), https://www.osha.gov/SLTC/scaffolding/.20.05.2017
  31. Url-4 (2017), http://www.urtim.com/formwork-and-scaffolding-systems, 20.05.2017.
  32. Url-5 (2017), http://www.ozleriskele.com/products/facade- scaffolding-systems/facade-scaffolding-system-h-type, 20.05.2017.
  33. Url-6 (2017), http://practicalscaffolding.com/h-type-facade-scaffolding.html, 20.05.2017.