DOI QR코드

DOI QR Code

Static analysis of non-uniform heterogeneous circular plate with porous material resting on a gradient hybrid foundation involving friction force

  • Rad, A. Behravan (Engineering Department, Zamyad Company) ;
  • Farzan-Rad, M.R. (Ministry of Education, Shahryar Branch) ;
  • Majd, K. Mohammadi (Engineering Department, Zamyad Company)
  • 투고 : 2017.02.19
  • 심사 : 2017.08.18
  • 발행 : 2017.12.10

초록

This paper is concerned with the static analysis of variable thickness of two directional functionally graded porous materials (FGPM) circular plate resting on a gradient hybrid foundation (Horvath-Colasanti type) with friction force and subjected to compound mechanical loads (e.g., transverse, in-plane shear traction and concentrated force at the center of the plate).The governing state equations are derived in terms of displacements based on the 3D theory of elasticity, assuming the elastic coefficients of the plate material except the Poisson's ratio varying continuously throughout the thickness and radial directions according to an exponential function. These equations are solved semi-analytically by employing the state space method (SSM) and one-dimensional differential quadrature (DQ) rule to obtain the displacements and stress components of the FGPM plate. The effect of concentrated force at the center of the plate is approximated with the shear force, uniformly distributed over the inner boundary of a FGPM annular plate. In addition to verification study and convergence analysis, numerical results are displayed to show the effect of material heterogeneity indices, foundation stiffness coefficients, foundation gradient indices, loads ratio, thickness to radius ratio, compressibility, porosity and friction coefficient of the foundation on the static behavior of the plate. Finally, the responses of FG and FG porous material circular plates to compound mechanical loads are compared.

키워드

참고문헌

  1. Abbasi, S., Farhatnia, F. and Jazi, SR. (2014), "A semi-analytical solution on static analysis of circular plate exposed to nonuniform axisymmetric transverse loading resting on Winkler elastic foundation", Arch. Civil Mech. Eng., 14(3), 476-488. https://doi.org/10.1016/j.acme.2013.09.007
  2. Akbas, S.D. (2017), "Post-buckling responses of functionally graded beams with porosities", Steel Compos. Struct., 24(5), 579-589. https://doi.org/10.12989/SCS.2017.24.5.579
  3. Alibeigloo, A. and Simintan, V. (2011), "Elasticity solution of functionally graded circular and annular plates integrated with sensor and actuator layers using differential quadrature", Compos. Struct., 93, 2473-2486. https://doi.org/10.1016/j.compstruct.2011.04.003
  4. Alipour, M.M. and Shariyat, M. (2013), "Semi-analytical solution for buckling analysis of variable thickness two-directional functionally graded circular plates with non-uniform elastic foundations", J. Eng. Mech., 139(5), 664-676. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000522
  5. Asgari, M. (2015), "Material distribution optimization of 2D heterogeneous cylinder under thermo-mechanical loading", Struct. Eng. Mech., 53(4), 703-723. https://doi.org/10.12989/sem.2015.53.4.703
  6. Baccicchi, M., Elsenberger, M., Fantuzzi, N., Tornabene, F. and Viola, E. (2015), "Vibration analysis of variable thickness plates and shells by the generalized differential quadrature method", Compos. Struct., 156, 218-238.
  7. Behravan Rad, A. (2012a), "Semi-analytical solution for functionally graded solid circular and annular plates resting on elastic foundations subjected to axisymmetric transverse loading", Adv. Appl. Math. Mech., 4(2), 205-222. https://doi.org/10.4208/aamm.10-m11104
  8. Behravan Rad, A. (2012b), "Static response of 2D functionally graded circular plate with gradient thickness and elastic foundations to compound loads", Struct Eng. Mech., 44(2), 139-161. https://doi.org/10.12989/sem.2012.44.2.139
  9. Behravan Rad, A. (2015), "Thermoelastic analysis of functionally graded circular plates resting on a gradient hybrid foundation", Appl. Math. Comp., 256, 276-298. https://doi.org/10.1016/j.amc.2015.01.026
  10. Behravan Rad, A. and Alibeigloo, A. (2013a), "Semi-analytical solution for the static analysis of 2D functionally graded circular and annular circular plates resting on elastic foundation", Mech. Adv. Mater Struct., 20(7), 515-528. https://doi.org/10.1080/15376494.2011.634088
  11. Behravan Rad, A. and Shariyat, M. (2013b), "A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions", Acta Mech. Solida Sin, 26(6), 671-690. https://doi.org/10.1016/S0894-9166(14)60010-0
  12. Behravan Rad, A., Alibeigloo, A. and Malihi, S.S. (2010), "Static analysis of functionally graded annular plate resting on elastic foundation subject to an axisymmetric transverse load, based on the three dimensional theory of elasticity", J. Solid. Mech., 2(3), 290-304.
  13. Benferhat, R., Daouadji, T.H., Mansour, M.S. and Hadji, L. (2016), "Effect of porosity on the bending and free vibration response of functionally graded plates resting on Winkler-Pasternak foundations", Earthq. Struct., 10(6), 1429-1449. https://doi.org/10.12989/eas.2016.10.6.1429
  14. Chen, D., Yang, J. and Kitipornchai, S. (2015), "Elastic buckling and static bending of shear deformable functionally graded porous beam", Compos. Struct., 133, 54-61. https://doi.org/10.1016/j.compstruct.2015.07.052
  15. Chen, W.Q., Lu, C.F. and Bian, Z.G. (2004), "Free vibration analysis of generally laminated beams via state-space based differential quadrature", Compos. Struct., 63, 417-425. https://doi.org/10.1016/S0263-8223(03)00190-9
  16. Civalek, O. (2004a), "Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns", Eng. Struct., 26(2), 171-186. https://doi.org/10.1016/j.engstruct.2003.09.005
  17. Civalek, O. and Ulker, M. (2004), "Harmonic differential quadrature (HDQ) for axisymmetric bending analysis of thin isotropic circular plates", Struct. Eng. Mech., 17(1), 1-14. https://doi.org/10.12989/sem.2004.17.1.001
  18. Davoodi, K.I., Ghayour, M. and Mirdamadi, H.R. (2012), "Free vibration analysis of multi-directional functionally graded circular and annular plates", Mech. Sci. Tech., 26(11), 3399-3410. https://doi.org/10.1007/s12206-012-0860-2
  19. Drawshi, M. and Betten, J. (1992), "Axially symmetric deformations and stability of a geometrically nonlinear circular plate subjected to multiparametrical static loading", Arch. Appl. Mech., 62, 455-462. https://doi.org/10.1007/BF00810236
  20. Fallah, F. and Nosier, A. (2012), "Non-linear behavior of functionally graded circular plates with various boundary supports under asymmetric thermo-mechanical loading", Compos. Struct., 94, 2834-2850. https://doi.org/10.1016/j.compstruct.2012.03.029
  21. Fallah, F., Vahidipoor, M.K. and Nosier, A. (2015), "Post-buckling behavior of functionally graded circular plates under asymmetric transverse and in-plane loadings", Compos. Struct., 125, 477-488. https://doi.org/10.1016/j.compstruct.2015.02.018
  22. Farzaneh Joubaneh, E., Mojahedin, A., Khorshidvand, A.R. and Jabbari, M. (2015), "Thermal buckling analysis of porous circular plate with piezoelectric sensor-actuator layers under uniform thermal load", J. Sandw. Struct. Mater., 17(1), 3-25. https://doi.org/10.1177/1099636214554172
  23. Gupta, A. and Talha, M. (2015), "Recent development in modeling and analysis of functionally graded materials and structures", Prog. Aero. Sci., 79, 1-14.
  24. Jabbari, M., Farzaneh Joubaneh, E. and Mojahedin, A. (2014a), "Thermal buckling analysis of a porous circular plate with piezoelectric actuators based on first order shear deformation theory", Int. J. Mech. Sci., 83, 57-64. https://doi.org/10.1016/j.ijmecsci.2014.03.024
  25. Jabbari, M., Farzaneh Joubaneh, E., Khorshidvand, A.R. and Eslami, M.R. (2013), "Buckling analysis of porous circular plate with piezoelectric actuator layers under uniform compression", Int. J. Mech. Sci., 70, 50-56. https://doi.org/10.1016/j.ijmecsci.2013.01.031
  26. Jabbari, M., Karampour, S. and Eslami, M.R. (2013), "Steady state thermal and mechanical stresses of a poro-piezo FGM hollow sphere", Meccanica, 48, 699-719. https://doi.org/10.1007/s11012-012-9625-3
  27. Jabbari, M., Mojahedin, A., Hashemitaheri, M. and Eslami, M.R. (2014b), "Thermal buckling analysis of functionally graded thin circular plate made of saturated porous materials", J. Therm. Stress, 37(2), 202-220. https://doi.org/10.1080/01495739.2013.839768
  28. Jabbari, M., Mojahedin, A., Khorshidvand, A.R. and Eslami, M.R. (2014c), "Buckling analysis of a functionally graded thin circular plate made of saturated porous materials", J. Eng. Mech., 140(2), 287-295. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000663
  29. Jodaei, A. (2014), "3D elasticity solution for static analysis of functionally graded piezoelectric annular plates on elastic foundations using SSDQM", Meccanica, 49(1), 215-237. https://doi.org/10.1007/s11012-013-9786-8
  30. Khorshidvand, A.R., Farzaneh Joubaneh, E., Jabbari, M. and Eslami, M.R. (2014), "Buckling analysis of a porous circular plate with piezoelectric sensor-actuator layers under uniform radial compression", Acta Mech., 225, 179-193. https://doi.org/10.1007/s00707-013-0959-2
  31. Kumar, Y. and Lal, R. (2013), "Prediction of frequencies of free axisymmetric vibration of two directional functionally graded annular plates on Winkler foundation", Eur. J. Mech. A-Solid., 42, 219-228. https://doi.org/10.1016/j.euromechsol.2013.06.001
  32. Lal, R. and Ahlawat, N. (2015a), "Axisymmetric vibrations and buckling analysis of functionally graded circular plates via differential transform method", Eur. J. Mech. A-Solid., 52, 85- 94. https://doi.org/10.1016/j.euromechsol.2015.02.004
  33. Lal, R. and Ahlawat, N. (2015b), "Buckling and vibration of functionally graded non-uniform circular plates resting on Winkler foundation", Latin Am. J. Solid. Struct., 12, 2231-2258. https://doi.org/10.1590/1679-78251595
  34. Li, X.Y., Ding, H.J. and Chen, W.Q. (2008), "Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load $qr^k$", Int. J. Solid. Struct., 45(1), 191-210. https://doi.org/10.1016/j.ijsolstr.2007.07.023
  35. Malekzadeh, P., Golbahar Haghighi, M.R. and Atashi, M.M. (2011), "Free vibration analysis of elastically supported functionally graded annular plates subjected to thermal environment", Meccanica, 47(2), 321-333. https://doi.org/10.1007/s11012-011-9436-y
  36. Mojahedin, A., Jabbari, M., Khorshidvand, A.R. and Eslami, M.R. (2016), "Buckling analysis of a functionally graded plates made of saturated porous materials based on higher order shear deformation theory", Thin Wall. Struct., 99, 83-90. https://doi.org/10.1016/j.tws.2015.11.008
  37. Nie, G.J. and Zhong, Z. (2007), "Semi-analytical solution for three dimensional vibration of functionally graded circular plates", Comput. Meth. Appl. Mech. Eng., 196, 4901-4910. https://doi.org/10.1016/j.cma.2007.06.028
  38. Nie, G.J. and Zhong, Z. (2007a), "Axisymmetric bending of two- directional functionally graded circular and annular plates", Acta Mech. Solida Sin., 20(4), 289-295. https://doi.org/10.1007/s10338-007-0734-9
  39. Saidi, A.R., Rasouli, A. and Sahraee, S. (2009), "Axisymmetric bending and buckling analysis of thick functionally graded circular plates using unconstrained third-order shear deformation plate theory", Compos. Struct., 89(1), 110-119. https://doi.org/10.1016/j.compstruct.2008.07.003
  40. Sburlati, R. and Bardella, L. (2011), "Three-dimensional elastic solutions for functionally graded circular plates", Eur. J. Mech. A-Solid., 30, 219-235. https://doi.org/10.1016/j.euromechsol.2010.12.008
  41. Sepahi, O., Forouzan, M.R. and Malekzadeh, P. (2010), "Large deflection analysis of thermo-mechanical loaded annular FGM plates on nonlinear elastic foundation via DQM", Compos. Struct., 92(10), 2369-2378. https://doi.org/10.1016/j.compstruct.2010.03.011
  42. Shariyat, M. and Alipour, M.M. (2011), "Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations", Arch. Appl. Mech., 81(9), 1289-1306. https://doi.org/10.1007/s00419-010-0484-x
  43. Sladek, J., Sladek, V., Stanak, P. and Hrcek, S. (2015), "Bending of a porous piezoelectric cylinder under a thermal load", Eng. Anal. Bound. Elem., 51, 136-145. https://doi.org/10.1016/j.enganabound.2014.10.017
  44. Swaminathan, K., Naveenkumar, D.T., Zenkour, A.M. and Carrera, E. (2015), "Stress, vibration and buckling analyses of FGM plates: a state-of-the-art review", Compos. Struct., 120, 10-31. https://doi.org/10.1016/j.compstruct.2014.09.070
  45. Tahouneh, V. and Yas, M.H. (2014), "Semi-analytical solution for three dimensional vibration analysis of thick multidirectional functionally graded annular sector plates under various boundary conditions", J. Eng. Mech., 140(1), 31-46. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000653
  46. Tornabene, F., Fantuzzi, N. and Baccicchi, M. (2016), "The local GDQ method for the natural frequencies of doubly-curved shells with variable thickness: A general formulation", Compos. Part B: Eng., 92, 265-289. https://doi.org/10.1016/j.compositesb.2016.02.010
  47. Wang, Y., Ding, H.J. and Xu, R.Q. (2016), "Three-dimensional analytical solutions for the axisymmetric bending of functionally graded annular plates", Appl. Math. Model., 40, 5393-5420. https://doi.org/10.1016/j.apm.2015.11.051
  48. Wang, Y., Xu, R.Q. and Ding, H.J. (2010), "Three-dimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92, 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002
  49. Wirowski, A., Michalak, B. and Gajdzicki, M. (2015), "Dynamic modeling of annular plates of functionally graded structure resting on elastic heterogeneous foundation with two modules", J. Mech., 31(5), 493-504. https://doi.org/10.1017/jmech.2015.23
  50. Wu, C.P. and Liu, Y.C. (2016), "A review of semi-analytical numerical methods for laminated composites and multilayered functionally graded elastic/piezoelectric plates and shells", Compos. Struct., 147(1), 1-15. https://doi.org/10.1016/j.compstruct.2016.03.031
  51. Yang, B., Chen, W.Q. and Ding, H.J. (2014), "Approximate elasticity solution for functionally graded circular plates subjected to a concentrated force at the center", Math. Mech. Solid., 19(3), 277-288. https://doi.org/10.1177/1081286512463572
  52. Yas, M.H. and Moloudi, N. (2015), "Three-dimensional free vibration analysis of multi-directional functionally graded piezoelectric annular plates on elastic foundations via state space based differential quadrature method", Appl Math Mech., 36(4), 439-464. https://doi.org/10.1007/s10483-015-1923-9
  53. Yas, M.H. and Tahouneh, V. (2012), "3D free vibration analysis of thick functionally graded annular plates on Pasternak elastic foundation via differential quadrature method (DQM)", Acta Mech., 223(1), 43-62. https://doi.org/10.1007/s00707-011-0543-6

피인용 문헌

  1. Hard particle force in a soft fracture vol.9, pp.1, 2019, https://doi.org/10.1038/s41598-019-40179-4
  2. Concerning the tensor-based flexural formulation: Theory vol.70, pp.4, 2017, https://doi.org/10.12989/sem.2019.70.4.445
  3. Concerning the tensor-based flexural formulation: Applications vol.77, pp.6, 2021, https://doi.org/10.12989/sem.2021.77.6.765