Structural Engineering and Mechanics

  • 제64권5호
  • /
  • Pages.567-577
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A multi-parameter optimization technique for prestressed concrete cable-stayed bridges considering prestress in girder

  • Gao, Qiong (School of Civil Engineering, Central South University) ;
  • Yang, Meng-Gang (School of Civil Engineering, Central South University) ;
  • Qiao, Jian-Dong (School of Civil Engineering, Central South University)
  • 투고 : 2017.03.05
  • 심사 : 2017.08.07
  • 발행 : 2017.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The traditional design procedure of a prestressed concrete (PC) cable-stayed bridge is complex and time-consuming. The designers have to repeatedly modify the configuration of the large number of design parameters to obtain a feasible design scheme which maybe not an economical design. In order to efficiently achieve an optimum design for PC cable-stayed bridges, a multi-parameter optimization technique is proposed. In this optimization technique, the number of prestressing tendons in girder is firstly set as one of design variables, as well as cable forces, cable areas and cross-section sizes of the girders and the towers. The stress and displacement constraints are simultaneously utilized to ensure the safety and serviceability of the structure. The target is to obtain the minimum cost design for a PC cable-stayed bridge. Finally, this optimization technique is carried out by a developed PC cable-stayed bridge optimization program involving the interaction of the parameterized automatically modeling program, the finite element structural analysis program and the optimization algorithm. A low-pylon PC cable-stayed bridge is selected as the example to test the proposed optimization technique. The optimum result verifies the capability and efficiency of the optimization technique, and the significance to optimize the number of prestressing tendons in the girder. The optimum design scheme obtained by the application can achieve a 24.03% reduction in cost, compared with the initial design.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC)

참고문헌

  1. Baldomir, A., Hernandez, S., Nieto, F. and Jurado, J.A. (2010), "Cable optimization of a long span cable-stayed bridge in La Coruna (Spain)", Adv. Eng. Softw., 41, 931-938. https://doi.org/10.1016/j.advengsoft.2010.05.001
  2. Boggs, P.T. and Tolle, J.W. (2000), "Sequential quadratic programming for large-scale nonlinear optimization", J. Comput. Appl. Math., 124, 123-137. https://doi.org/10.1016/S0377-0427(00)00429-5
  3. Carpentieri, G., Modano, M., Fabbrocino, F., Fraternali, F. "Optimal design and dynamics of truss bridges", COMPDYN 2015 - 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 1731-1740.
  4. Cheng, J., Xiao, R.C. and Jiang, J.J. (2004), "Probabilistic determination of initial cable forces of cable-stayed bridges under dead loads", Struct. Eng. Mech., 17(2), 267-279. https://doi.org/10.12989/sem.2004.17.2.267
  5. Dan, D.H., Chen, Y.Y., Yan, X.F. (2014), "Determination of cable force based on the corrected numerical solution of cable vibration frequency equations", Struct. Eng. Mech., 50(1), 37- 52. https://doi.org/10.12989/sem.2014.50.1.037
  6. Ernst, J.H. (1965) "Der E-Modul von Seilen unter berucksichtigung des Durchhanges", Der, Bauingenieur, 40(2), 52-55.
  7. Exler, O. and Schittkowski, K. (2007), "A trust region SQP algorithm for mixed-integer nonlinear programming", Optim. Lett., 1, 269-280. https://doi.org/10.1007/s11590-006-0026-1
  8. Exler, O., Lehmann, T. and Schittkowski, K. (2009), "MISQP: A Fortran implementation of a trust region SQP algorithm for mixed-integer nonlinear programming - User's guide", Report, Department of Computer Science, University of Bayreuth, D- 95440 Bayreuth.
  9. Fabbrocino, F., Modano, M., Farina, I., Carpentieri, G. and Fraternali, F. (2017), "Optimal prestress design of composite cable-stayed bridges", Compos. Struct., 169, 167-172 https://doi.org/10.1016/j.compstruct.2016.09.008
  10. Feng, D.M., Scarangelloa, T., Feng, M.Q. and Ye, Q. (2017), "Cable tension force estimate using novel noncontact vision-based sensor", Measur., 99, 44-52. https://doi.org/10.1016/j.radmeas.2017.03.025
  11. Hassan, M.M. (2013), "Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique", Eng. Struct., 49, 643-645. https://doi.org/10.1016/j.engstruct.2012.11.036
  12. Hassan, M.M., Nassef, A.O. and El Damatty, A.A. (2010), "Determination of optimum post-tensioning cable forces of cable-stayed bridges", Eng. Struct., 44, 248-259.
  13. JTG D60-2004 (2004), General Code for Design of Highway Bridges and Culverts.
  14. JTG/T D65-01-2007 (2007), Guidelines for Design of Highway Cable-stayed Bridge.
  15. Kutylowski, R. and Rasiak, B. (2014), "Application of topology optimization to bridge girder design", Struct. Eng. Mech., 51(1), 39-66 https://doi.org/10.12989/sem.2014.51.1.039
  16. Lee, T.Y., Kim, Y.H. and Kang, S.W. (2008), "Optimization of tensioning strategy for asymmetric cable-stayed bridge and its effect on construction process", Struct. Multidiscip. Optim., 35, 623-629. https://doi.org/10.1007/s00158-007-0172-9
  17. Lonetti, P. and Pascuzzo, A. (2014), "Optimum design analysis of hybrid cable-stayed suspension bridges", Adv. Eng. Softw., 73, 53-66. https://doi.org/10.1016/j.advengsoft.2014.03.004
  18. Martins, A.M.B., Simões, L.M.C. and Negrão, J.H.J.O. (2015a), "Cable stretching force optimization of concrete cable-stayed bridges including construction stages and time-dependent effects", Struct. Multidiscip. Optim., 51, 757-772. https://doi.org/10.1007/s00158-014-1153-4
  19. Martins, A.M.B., Simões, L.M.C. and Negrão, J.H.J.O. (2015b), "Optimization of cable forces on concrete cable-stayed bridges including geometrical nonlinearities", Comput. Struct., 155, 18-27. https://doi.org/10.1016/j.compstruc.2015.02.032
  20. Martins, A.M.B., Simoes, L.M.C. and Negrao, J.H.J.O. (2016), "Optimum design of concrete cable-stayed bridges with prestressed decks", Int. J. Comp. Meth. Eng. Sci. Mech., 17(1), 339-349. https://doi.org/10.1080/15502287.2016.1231237
  21. Modano, M., Fabbrocino, F., Gesualdo, A., Carpentieri, G., Fraternali, F. (2015), "On the optimal design of the pre-tensioning of cable-stayed bridges (Sul progetto ottimale dello schema di tesatura dei ponti strallati)", Atti del XXV CONGRESSO C.T.A. - XXV Italian Steel Days (Salerno, 1-3 Ottobre 2015), Vol. 1: Tensegrity and Stability (Tensegrity e Stabilita), 117-124.
  22. Simoes, L.M.C. and Negrao, J.H.J.O. (2000), "Optimization of cable-stayed bridges with box-girder decks", Adv. Eng. Softw., 31, 417-423. https://doi.org/10.1016/S0965-9978(00)00003-X
  23. Sung, Y.C., Chang, D.W. and Teo, E.H. (2006), "Optimum post-tensioning cable forces of Mau-Lo Hsi cable-stayed bridge", Eng. Struct., 28, 1407-1417. https://doi.org/10.1016/j.engstruct.2006.01.009
  24. Venkat, L., Akhil, U. and Singh, K.K. (2009), "Computationally efficient analysis of cable-stayed bridge for GA-based optimization", Eng. Appl. Artif. Intell., 22, 750-758. https://doi.org/10.1016/j.engappai.2009.04.001
  25. Yang, M.G. and Cai, C.S. (2016), "Longitudinal vibration control for a suspension bridge subjected to vehicle braking forces and earthquake excitations based on magnetorheological dampers", J. Vib. Control, 22(17), 3659-3678. https://doi.org/10.1177/1077546314564781
  26. Yang, M.G., Cai, C.S. and Chen, Y. (2015), "Creep performance of concrete-filled steel tubular (CFST) columns and applications to a CFST arch bridge", Steel Compos. Struct., 19(1), 111-129. https://doi.org/10.12989/scs.2015.19.1.111
  27. Yang, M.G., Chen, Z.Q. and Hua, X.G. (2010), "A new two-node catenary cable element for the geometrically non-linear analysis of cable-supported structures", P. I. Mech. Eng. C, 224(C6), 1173-1183. https://doi.org/10.1243/09544062JMES1816
  28. Zhang, J. and Au, F.T.K. (2014), "Calibration of initial cable forces in cable-stayed bridge based on Kriging approach", Finite Elem. Anal. Des., 92, 80-92. https://doi.org/10.1016/j.finel.2014.08.007

피인용 문헌

  1. Multiparametric Analysis of a Gravity Retaining Wall vol.11, pp.13, 2017, https://doi.org/10.3390/app11136233