Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of Pyro Shock on Canister with Composite Sandwich Panel

복합재 샌드위치 패널 발사관의 폭발충격 영향도 분석

  • Received : 2016.06.09
  • Accepted : 2016.08.01
  • Published : 2016.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

Canister with composite sandwich panel has been suggested owing to its higher stiffness and strength over a weight for square shaped canisters. The pyro shock induced by a short time explosion inside a canister is generally considered to be the most severe source of load affecting on the entire structure. Therefore, in this study, the approach and modeling method to identify the effect of pyro shock on canister with composite sandwich panel in a numerical way were mainly discussed. Moreover, the verification was implemented through comparison with test results.

Keywords

References

  1. Kim, S. J., Hwang, I. H. and Hong, C. H., 2012, Impact Force and Acoustic Analysis on Composite Plates with In-plane Loading, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 2, pp. 179~186. https://doi.org/10.5050/KSNVE.2012.22.2.179
  2. Lee, J. Y., Shin, K. B. and Jeong, J. C., 2007 Simulation of Low Velocity Impact Honeycomb Sandwich Composite Panels for the BIMODAL Tram Application, Journal of the Korean Society for Composite Materials, Vol. 20, No. 4, pp. 42~50.
  3. Park, H. B. and Kong, C. D., 2013, Study on Impact Damage Behavior of Sandwich Composite Structure for aircraft, Composite Research, Vol. 26, No. 1, pp. 36~41. https://doi.org/10.7234/kscm.2013.26.1.36
  4. Yang, Y. R., 2014, Study on the Removal Mechanism of Canister End Caps Using the Shock Wave, Korean Society of Computational Fluids Engineering, 2014 Spring Conference, pp. 283~285.
  5. ASTM, Standard Test Methods for Core Shear Properties of Sandwich Constructions by Beam Flexure, American Society for Testing and Materials, C393/C393M-11.
  6. Sandeep, N., 2006, Behavior and Flexural Analysis of Balsa Wood Core Sandwich Composites, University of New Orleans Theses and Dissertations, New Orleans.
  7. Dag, B., Jan, R. B. and Kees, V. W., 1992, Gas Explosion Handbook, Gexcon, Inc., Norway.
  8. Daniel, I. M. and Ishai, O., 1994, Engineering Mechanics of Composite Materials, Oxford University Press, New York.
  9. Choi, N. R. and Lee, B. C., 2000, Estimation of Transverse Shear Stress in Laminated Composite Structures Using 4-node Degenerated Shell Elements, Journal of Mechanical Science and Technology. Vol. 24, No. 9, pp. 2292~2301.