References
- Rathbone, T. C., 1939, Vibration Tolerance, Power Plant Engineering, Vol. 43, pp. 721~724.
- Yates, G. H., 1949, Vibration Diagnosis in Marine Geared Turbines, Trans. North East Coast Institute of Eng. and Shipbuilders, 65.
- Dalpiaz, G., Rivola, A. and Rubini, R., 2000, Effectiveness and Sensitivity of Vibration Processing Techniques for Local Fault Detection in Gears, Mechanical Systems and Signal Processing, Vol. 14, No. 3, pp. 387~412. https://doi.org/10.1006/mssp.1999.1294
- Randall, R. B., 1983, The Application of Cepstrum Analysis to Machine Diagnostics, Technology Advances in Engineering and Their Impact on Detection, Diagnosis, and Prognosis Methods, Proceedings of the 36th Meeting of the Mechanical Failures Prevention Group, Vol. 36, p. 64.
- Randall, R. B., 2004, Detection and Diagnosis of Incipient Bearing Failure in Helicopter Gearboxes, Engineering Failure Analysis, Vol. 11, No. 2, pp. 177~190. https://doi.org/10.1016/j.engfailanal.2003.05.005
- McFadden, P. D. and Smith, J. D., 1984, Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing, Journal of Sound and Vibration, Vol. 96, No. 1, pp. 69~82. https://doi.org/10.1016/0022-460X(84)90595-9
- Dalpiaz, G. and Rivola, A., 1997, Condition Monitoring and Diagnostics in Automatic Machines: Comparison of Vibration Analysis Techniques, Mechanical Systems and Signal Processing, Vol. 11, No. 1, pp. 53~73. https://doi.org/10.1006/mssp.1996.0067
- Nikolaou, N. G. and Antoniadis, I. A., 2002, Rolling Element Bearing Fault Diagnosis Using Wavelet Packets, Ndt & E International, Vol. 35, No. 3, pp. 197~205. https://doi.org/10.1016/S0963-8695(01)00044-5
- Loutas, T. H., Sotiriades, G., Kalaitzoglou, I. and Kostopoulos, V., 2009, Condition Monitoring of a Single-stage Gearbox with Artificially Induced Gear Cracks Utilizing On-line Vibration and Acoustic Emission Measurements, Applied Acoustics, Vol. 70, No. 9, pp. 1148~1159. https://doi.org/10.1016/j.apacoust.2009.04.007
- Robinson, L. T., 2013, A Performance Comparison of Condition Based Monitoring Damage Features Used in Rotating Machines under Variable Conditions.
- Jeon, B., Jung, J. and Youn, B. D., 2015, Anomaly Diagnostics for Rotor System Using Statistical Analysis of Vibration Signal, Proceeding of the KSNVE Annual Autumn Conference, pp. 831~832.
- Jeoung, R. H., Chai, J. B., Lee, B. H., Lee, D. H. and Lee, B. K., 2012, Feature Parameter Analysis for Rotor Fault Diagnosis, Journal of Fluid Machinery, Vol. 15, No. 6, pp. 31~38. https://doi.org/10.5293/kfma.2012.15.6.031
- Konar, P. and Chattopadhyay, P., 2015, Multi-class Fault Diagnosis of Induction Motor Using Hilbert and Wavelet Transform, Applied Soft Computing, Vol. 30, pp. 341~352. https://doi.org/10.1016/j.asoc.2014.11.062
- Li, W., Zhu, Z., Jiang, F., Zhou, G. and Chen, G., 2015, Fault Diagnosis of Rotating Machinery with a Novel Statistical Feature Extraction and Evaluation Method, Mechanical Systems and Signal Processing, Vol. 50-51, pp. 414~426. https://doi.org/10.1016/j.ymssp.2014.05.034
- Kang, M., Kim, J., Wills, L. M. and Kim, J. M., 2015, Time-varying and Multiresolution Envelope Analysis and Discriminative Feature Analysis for Bearing Fault Diagnosis, IEEE Transactions on Industrial Electronics, Vol. 62, No. 12, pp. 7749~7761. https://doi.org/10.1109/TIE.2015.2460242
- Donoho, D. L., 2006, Compressed Sensing, IEEE Transactions on Information Theory, Vol. 52, No. 4, 1289~1306. https://doi.org/10.1109/TIT.2006.871582
- Mascarenas, D., Hush, D., Theiler, J., Farrar, C. and To, I., 2011, The Application of Compressed Sensing to Detecting Damage in Structures, Proceeding of the 8th International Workshop on Structural Health Monitoring.
- Höglund, J., Voigt, T., Wei, B., Hu, W. and Karoumi, R., 2014, Compressive Sensing for Bridge Damage Detection, Proceeding of the 5th Nordic Workshop, on System and Network Optimization for Wireless.
- Bao, Y., Beck, J. L. and Li, H., 2010, Compressive Sampling for Accelerometer Signals in Structural Health Monitoring, Structural Health Monitoring.
- Park, J. Y., Wakin, M. B. and Gilbert, A. C. 2014. Modal Analysis with Compressive Measurements, IEEE Transactions on Signal Processing, Vol. 62, No. 7, pp. 1655~1670. https://doi.org/10.1109/TSP.2014.2302736