DOI QR코드

DOI QR Code

Modified gradient methods hybridized with Tikhonov regularization for damage identification of spatial structure

  • Naseralavi, S.S. (Department of Civil Engineering, Vali-e-Asr University of Rafsanjan) ;
  • Shojaee, S. (Department of Civil Engineering, Shahid Bahonar University of Kerman) ;
  • Ahmadi, M. (Department of Civil Engineering, Shahid Bahonar University of Kerman)
  • Received : 2015.10.12
  • Accepted : 2016.04.06
  • Published : 2016.11.25

Abstract

This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference between the recorded acceleration of a real damaged structure and a hypothetical damaged one. This is performed by updating physical parameters (module of elasticity in this study) in each step using iterative process of modified nonlinear conjugate gradient (M-NCG) and modified Broyden-Fletcher-Goldfarb-Shanno algorithm (M-BFGS) separately. These algorithms are based on sensitivity analysis and provide a solution for nonlinear damage detection problem. Three illustrative test examples are considered to assess the performance of the proposed method. Finally, it is demonstrated that the proposed method is satisfactory for detecting the location and ratio of structural damage in presence of noise.

Keywords

References

  1. Bakir, P.G., Reynders, E. and De Roeck, G. (2007), "Sensitivity-based finite element model updating using constrained optimization with a trust region algorithm", J. Sound Vib., 305(1-2), 211-225. https://doi.org/10.1016/j.jsv.2007.03.044
  2. Basseville, M. Mevel, L. and Goursat, M. (2004), "Statistical model-based damage detection and localization: subspace-based residuals and damage-to-noise sensitivity ratios", J. Sound Vib., 275(3), 769-794. https://doi.org/10.1016/j.jsv.2003.07.016
  3. Chou, J.H. and Ghaboussi, J. (2001), "Genetic algorithm in structural damage detection", Comput. Struct., 79(14), 1335-1353. https://doi.org/10.1016/S0045-7949(01)00027-X
  4. Esfandiari, A., Bakhtiari-Nejad, F., Rahai, A. and Sanayei, M. (2009), "Structural model updating using frequency response function and quasi-linear sensitivity equation", J. Sound Vib., 326(3), 557-573. https://doi.org/10.1016/j.jsv.2009.07.001
  5. Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: A review and comparative study", Struct. Health Monit., 10, 83-111. https://doi.org/10.1177/1475921710365419
  6. Jaishi, B. and Ren, W.X. (2006), "Damage detection by finite element model updating using modal flexibility residual", J. Sound Vib., 290(1-2), 369-387. https://doi.org/10.1016/j.jsv.2005.04.006
  7. Kaveh, A. and Maniat, M. (2014), "Damage detection in skeletal structures based on charged system search optimization using incomplete modal data", Int. J. Civil Eng., 12(2), 291-298.
  8. Kaveh, A. and Talatahari, S. (2009), "Particle swarm optimizer, ant colony strategy and harmony search scheme hybridized for optimization of truss structures", Comput. Struct., 87(5), 267-283. https://doi.org/10.1016/j.compstruc.2009.01.003
  9. Lee, J. (2009), "Identification of multiple cracks in a beam using natural frequencies", J. Sound Vib., 320(3), 482-490. https://doi.org/10.1016/j.jsv.2008.10.033
  10. Li, X. and Law, S. (2010), "Adaptive Tikhonov regularization for damage detection based on nonlinear model updating", Mech. Syst. Signal Pr., 24(6), 1646-1664. https://doi.org/10.1016/j.ymssp.2010.02.006
  11. Luenberger, D. and Ye, Y. (2007), "Linear and Nonlinear Programming", International Series in Operations Research & Management Science.
  12. Naseralavi, S.S., Salajegheh, E., Salajegheh, J. and Fadaee M.J. (2012), "Detection of damage in cyclic structures using an eigenpair sensitivity matrix", Comput. Struct., 110-111, 43-59. https://doi.org/10.1016/j.compstruc.2012.06.003
  13. Naseralavi, S.S., Salajegheh, E., Salajegheh. J. and Ziaee, M. (2012), "A two-stage method for damage detection of large-scale structures", Int. J. Optim. Civil Eng., 2(4), 489-510.
  14. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound Vib., 145(2), 321 -332. https://doi.org/10.1016/0022-460X(91)90595-B
  15. Rytter, A. (1993), "Vibrational based inspection of civil engineering structures", Ph.D. Dissertation Department of Building Technology and Structural Engineering.
  16. Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  17. Sarvi, F., Shojaee, S. and Torkzadeh, P. (2014), "Damage identification of trusses by finite element model updating using an enhanced levenberg -marquardt algorithm", Int. J. Optim. Civil Eng., 4(2), 207-231.
  18. Teughels, A. and De Roeck, G. (2005), "Damage detection and parameter identification by finite element model updating", Revue Europeenne de Genie Civil, 9(1-2), 109-158. https://doi.org/10.1080/17747120.2005.9692748
  19. Teughels, A., Maeck, J. and De Roeck, G. (2002), "Damage assessment by FE model updating using damage functions", Comput. Struct., 80(25), 1869-1879. https://doi.org/10.1016/S0045-7949(02)00217-1
  20. Torkzadeh, P., Goodarzi, Y. and Salajegheh, E. (2013), "A two-stage damage detection method for large-scale structures by kinetic and modal strain energies using heuristic particle swarm optimization", Int. J. Optim. Civil Eng., 3(3), 465-482.
  21. Wang, Y., Liu, J., Shi, F. and Xiao, J. (2011), "A method to identify damage of roof truss under static", Artif. Intell. Comput. Intell., 9-15.
  22. Yan, Y.J., Cheng, L., Wu, Z.Y. and Yam, L.H. (2007), "Development in vibration-based structural damage detection technique", Mech. Syst. Signal Pr., 21(5), 2198-2211. https://doi.org/10.1016/j.ymssp.2006.10.002

Cited by

  1. An iterative method for damage identification of skeletal structures utilizing biconjugate gradient method and reduction of search space vol.23, pp.1, 2016, https://doi.org/10.12989/sss.2019.23.1.045