Structural Engineering and Mechanics

  • 제60권4호
  • /
  • Pages.567-594
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural performance of ribbed ferrocement plates reinforced with composite materials

  • Shaheen, Yousry B.I. (Civil Engineering Department, Faculty of Engineering, Modern University for Technology and Information (MTI)) ;
  • Mahmoud, Ashraf M. (Civil Engineering Department, Faculty of Engineering, Modern University for Technology and Information (MTI)) ;
  • Refat, Hala M. (Civil Engineering Department, Faculty of Engineering, Modern University for Technology and Information (MTI))
  • 투고 : 2016.01.08
  • 심사 : 2016.07.28
  • 발행 : 2016.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

The main objective of the current research is estimating the flexural behavior of ferrocement Ribbed Plates reinforced with composite material. Experimental investigation was carried out on fifteen plates; their dimensions were kept constant at 1200 mm in length, 600 mm width and 100 mm thick but with different volume fraction of steel reinforcement and number of ribs. Test specimens were tested until failure under three line loadings with simply supported conditions over a span of 1100 mm. Cracking patterns, tensile and compressive strains, deformation characteristics, ductility ratio, and energy absorption properties were observed and measured at all stages of loadings. Experimental results were compared to analytical models using ANSYS 10 program. Parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of plate length. The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume fraction and the type of reinforcement, and also proved the effectiveness of expanded metal mesh and woven steel mesh in reinforcing the ribbed ferrocement plates. In addition, the developed ribbed ferrocement plates have high strength, ductility ratio and energy absorption properties and are lighter in weight compared to the conventional RC ribbed plates, which could be useful for developed and developing countries alike. The Finite Element (FE) simulations gave good results comparing with the experimental results.

키워드

참고문헌

  1. Abdul-Fataha, S. (2014), "Structural behavior of concrete beams reinforced with innovative materials", M. Sc. Thesis, Minufiya University, Shebin El-Kom, Egypt.
  2. Aboul-Anen, B., El-Shafey, A. and El-Shami, M. (2009), "Experimental and analytical model of ferrocement slabs", Int. J. Recent Trend. Eng., 1(6), 25-29.
  3. ACI 549R-97 (1993), State-of-the-Art Report on Ferrocement, American Concrete Institute, Detroit, MI 48219, USA.
  4. Acma, L., Dumpasan, G., Salva, M., Mansaguiton, M., Supremo, R. and Daquiado, N. (2015), "Flexural strength and ductility behavior of ferrocement I-beam", Mindanao J. Sci. Tech., 13, 99-108.
  5. Al-Kubaisy, M.A. and Jumaat, M.Z. (2000), "Flexural behavior of reinforced concrete slabs with ferrocement tension zone cover", J. Constr. Build. Mater., 14, 245-252. https://doi.org/10.1016/S0950-0618(00)00019-2
  6. Al-Rifaei, W.N. and Hassan, A.H. (1994), "Structural behavior of thin ferrocement one-way bending elements", J. Ferroc., 24(2), 115-126.
  7. Ali, A. (1995), "Applications of ferrocement as a low cost construction material in Malaysia", J. Ferroc., 25(2), 123-128.
  8. ANSYS "Help and manual" (2006), 12th Editor, ANSYS Inc, PA, USA.
  9. E.C.P. (2007), Egyptian code of practice: design and construction for reinforced concrete structures, research Centre for Houses Building and Physical Planning, Cairo, Egypt, No. 203.
  10. El-Halfawy, E. (2003), "Flexural behavior of ferrocement deck bridges", M.Sc. Thesis, Minufiya University, Shebin El-Kom, Egypt.
  11. El-Sakhawy, Y. (2000), "Structural behavior of ferrocement roof elements", B.Sc. Thesis, Minufiya University, Shebin El-Kom, Egypt.
  12. Elavenil, S. and Chandrasekar, V. (2007), "Analysis of reinforced concrete beams strengthened with ferrocement", Int. J. Appl. Eng. Res., 2(3), 431-440.
  13. Eskandari, H. and Madadi, A. (2015), "Investigation of ferrocement channels using experimental and finite element analysis", Int. J. Eng. Sci. Tech., 18(4), 769-775. https://doi.org/10.1016/j.jestch.2015.05.008
  14. Fahmy, E.H. and Shaheen, Y.B. (1994), "Laminated ferrocement for strengthening and repairing of reinforced concrete beams", Proceeding of Annual Conference of CSCE, 475-483.
  15. Fahmy, E.H., Ezzat, H., Shaheen, Y.B. and Abou Zeid, M.N. (2004), "Development of ferrocement panels for floor and wall construction", Proceedings of the 5th Structural Specialty Conference of the Canadian Society for Civil Engineering, Saskatoon, Saskatchewan, Canada.
  16. Fahmy, E.H., Ezzat, H., Shaheen, Y.B., Abou Zeid, M.N. and Abdel Naby, A.M. (2005), "Permanent ferrocement forms: a viable alternative for construction of concrete bBeams", Proceedings of the 30th Conference on Our World in Concrete and Structures, Singapore, 249-256.
  17. Fahmy, E.H., Shaheen, Y.B. and Korany, Y.S. (1997), "Use of ferrocement laminates for repairing reinforced concrete slabs", J. Ferroc., 27(3), 219-232.
  18. Fahmy, E.H., Shaheen, Y.B. and Korany, Y.S. (1999), "Repairing reinforced concrete columns using feroocement laminates", J. Ferroc., 29(2), 115-124.
  19. Fahmy, E.H., Shaheen, Y.B., Abou-Zeid, M.N. and Abdel-Naby, A.M. (2005), "Permanent ferrocement forms: a viable alternative for construction of concrete beams", Proceedings of the 30th Conference on Our World in Concrete and Structures, Singapore, 249-256.
  20. Fahmy, E.H., Shaheen, Y.B.I. and Abou-Zeid, M.N. (2004), "Development of ferrocement panels for floor and wall construction", Proceedings of the 5th Structural Specialty Conference of the Canadian Society for Civil Engineering, Saskatoon, Saskatchewan, Canada.
  21. Fahmy, E.H., Shaheen, Y.B.I. and Korany, Y.S. (1999), "Repairing reinforced concrete columns using ferrocement laminates", J. Ferroc., 29(2), 115-124.
  22. Hafiz, A. (2012), "Structural behaviour of ferrocement channels beams", M. Sc. Thesis, Minufiya University, Shebin El-Kom, Egypt.
  23. Hoque, M. (2006), "3D nonlinear mixed finite-element analysis of RC beams and plates with and without FRP reinforcement", M.Sc. Thesis, University of Manitoba, Winnipeg, Manitoba, Canada.
  24. Jumaat, M. and Alam, A. (2006), "Flexural strengthening of reinforced concrete beams using ferrocement laminate with skeletal bars", J. Appl. Sci. Res., 2(9), 559-566.
  25. Kaish, M.A., Alam, A.B., Jamil, M.R., Zain, M.F. and Wahed, M.A. (2012), "Improved ferrocement jacketing for restrengthening of square RC short column", J. Constr. Build. Mater., 36, 228-237. https://doi.org/10.1016/j.conbuildmat.2012.04.083
  26. Mays, G.C. and Barnes, R.A. (1995), "Ferrocement permanent formwork as protection to reinforced steel mesh concrete", J. Ferroc., 25(4), 331-345.
  27. Mourad, S.M. and Shannag, M.J. (2012), "Repair and strengthening of reinforced concrete square columns using ferrocement jackets", Cement Concrete Compos., 34, 288-294. https://doi.org/10.1016/j.cemconcomp.2011.09.010
  28. Robles-Austriaco, L., Pama, R.P. and Valls, J. (1981), "Ferrocement an innovative technology for housing", J. Ferroc., 11(1), 23-47.
  29. Sakthivel, P. and Jagannathan, A. (2012), "Fibrous ferrocement composite with PVC-coated weld mesh and bar-chip polyolefin fibers", Int. J. Geom., 3(2), 381-388.
  30. Sakthivel, P. and Jagannathan, A. (2012), "Study of flexural ferrocement and thin reinforced cement behavior of ferrocement slabs reinforced with PVC-coated weld mesh", Int. J. Eng. Res. Develop., 1(12), 50-57.
  31. Shaheen, Y., Eltaly, B. and Abdul-Fataha, S. (2014), "Structural performance of ferrocement beams reinforced with composite materials", Struct. Eng. Mech., 50(6), 817-834. https://doi.org/10.12989/sem.2014.50.6.817
  32. Shaheen, Y., Safan, M. and Abdalla, M. (2013), "Structural behavior of composite reinforced ferrocement plates", J. Concrete Res. Lett., 4(3), 621-638.
  33. Shaheen, Y., Soliman, N. and Hafiz, A. (2013), "Structural behavior of ferrocement channels beams", J. Concrete Res. Lett., 4(3), 621-638.
  34. Shaheen, Y.B.I., Eltaly, B. and Kameel, M. (2013), "Experimental and analytical investigation of ferrocement water pipe", J. Civil Eng. Constr. Tech., 4(4), 157-167.
  35. Shannag, M.J. and Mourad, S.M. (2012), "Flowable high strength cementitious matrices for ferrocement applications", Constr. Build. Mater., 36, 933-939. https://doi.org/10.1016/j.conbuildmat.2012.06.051
  36. Singh, G. (2006), "Finite element analysis of reinforced concrete shear walls", M.Sc. Thesis, Deemed University, India.
  37. Singh, V., Bansal, P. and Kumar, M. (2015), "Experimental studies on strength and ductility of ferrocement jacketed RC beam-column joints", Int. J. Civil Struct. Eng., 5(3), 199-205.
  38. Xiong, G.J., Wu, X.Y., Li, F.F. and Yan, Z. (2011), "Load carrying capacity and ductility of circular concrete columns confined by ferrocement including steel bars", J. Constr. Build. Mater., 25, 2263-2268. https://doi.org/10.1016/j.conbuildmat.2010.11.014

피인용 문헌

  1. Structural analysis of a prestressed segmented girder using contact elements in ANSYS vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.319
  2. Experimental and FE simulations of ferrocement columns incorporating composite materials vol.64, pp.2, 2016, https://doi.org/10.12989/sem.2017.64.2.155
  3. Numerical simulation of the constructive steps of a cable-stayed bridge using ANSYS vol.69, pp.3, 2016, https://doi.org/10.12989/sem.2019.69.3.269