DOI QR코드

DOI QR Code

Effects of damping ratio on dynamic increase factor in progressive collapse

  • Mashhadi, Javad (Department of Civil Engineering, Shahid Bahonar University of Kerman) ;
  • Saffari, Hamed (Department of Civil Engineering, Shahid Bahonar University of Kerman)
  • Received : 2016.06.16
  • Accepted : 2016.10.23
  • Published : 2016.10.30

Abstract

In this paper, the effect of damping ratio on nonlinear dynamic analysis response and dynamic increase factor (DIF) in nonlinear static analysis of structures against column removal are investigated and a modified empirical DIF is presented. To this end, series of low and mid-rise moment frame structures with different span lengths and number of storeys are designed and the effect of damping ratio in DIF is investigated, performing several nonlinear static and dynamic analyses. For each damping ratio, a nonlinear dynamic analysis and a step by step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived. The results of the analysis reveal that DIF is decreased with increasing damping ratio. Finally, an empirical formula is recommended that relates to damping ratio. Therefore, the new modified DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of moment frame buildings with different damping ratios.

Keywords

References

  1. ASCE (2010), ASCE/SEI 7-10, Minimum design loads for buildings and other structures, Reston, VA, USA.
  2. ASCE (2013), ASCE/SEI 41-13, Seismic Evaluation and Retrofit of Existing Buildings, Reston, VA, USA.
  3. Cassiano, D., D'Aniello, M., Rebelo, C., Landolfo, R. and Silva, L.S. (2016), "Influence of seismic design rules on the robustness of steel moment resisting frames", Steel Compos. Struct., Int. J., 21(3), 479-500. https://doi.org/10.12989/scs.2016.21.3.479
  4. Chen, C.H., Zhu, Y.F., Yao, Y. and Huang, Y. (2016), "Progressive collapse analysis of steel frame structure based on the energy principle", Steel Compos. Struct., Int. J., 21(3), 553-571. https://doi.org/10.12989/scs.2016.21.3.553
  5. FEMA-277 (1997), The Oklahoma City bombing: Improving building performance through multi-hazard mitigation, Report: FEMA 277, Federal Emergency Management Agency (FEMA), Washington, D.C., USA.
  6. Griffiths, H., Pugsley, A. and Saunders, O. (1968), "Report of inquiry into the collapse of flats at Ronan Point, Canning Town, Ministry of Housing and Local Government", Her Majesty's Stationary Office, London, UK.
  7. GSA (2003), General Services Administration, Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects, Washington, D.C., USA.
  8. Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A. (2008), "Progressive collapse of multistorey buildings due to sudden column loss - Part I: Simplified assessment framework", Eng. Struct., 30(5), 1308-1318. https://doi.org/10.1016/j.engstruct.2007.07.011
  9. Liu, M. (2013), "A new dynamic increase factor for nonlinear static alternate path analysis of building frames against progressive collapse", Eng. Struct., 48, 666-673. https://doi.org/10.1016/j.engstruct.2012.12.011
  10. Marjanishvili, S. and Agnew, E (2006), "Comparison of various procedures for progressive collapse analysis", J. Perform. Constr. Facil., 20(4), 365-374. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(365)
  11. McKay, A. (2008), "Alternate path method in progressive collapse analysis: Variation of dynamic and nonlinear load increase factors", M.S. Thesis; Department of Civil Engineering, University of Texas, San Antonio, TX, USA.
  12. McKay, A., Marchand, K. and Diaz, M. (2012) "Alternate path method in progressive collapse analysis: variation of dynamic and nonlinear load increase factors", Pract. Period. Struct. Des. Constr., ASCE, 17(4), 152-160. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000126
  13. Mirtaheri, M. and Zoghi, M. (2016), "Design guides to resist progressive collapse for steel structures", Steel Compos. Struct., Int. J., 20(2), 357-378. https://doi.org/10.12989/scs.2016.20.2.357
  14. National Institute of Standards and Technology (NIST) (2005), Final Report on the Collapse of the World Trade Center Towers, S. Shyam Sunder, Lead Investigator, National Institute of Standards and Technology, Gaithersburg, MD, USA.
  15. Ruth, P., Marchand, K.A. and Williamson, E.B. (2006), "Static equivalency in progressive collapse alternate path analysis: reducing conservatism while retaining structural integrity", J. Perform. Constr. Facil., 20(4), 349-364. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(349)
  16. SAP2000 Nonlinear, Version 14.2 (2010), Structural Analysis Program, Computers and Structures Inc., Berkeley, CA, USA.
  17. Stevens, D.J., Crowder, B., Hall, B. and Marchand, K. (2008), "Unified progressive collapse design requirements for DoD and GSA", Structures Congress, Vancouver, Canada, April.
  18. UFC 4-023-03 (2013), United States Department of Defense, United facilities criteria design of buildings to resist progressive collapse, Washington D.C., USA.

Cited by

  1. Modification of dynamic increase factor to assess progressive collapse potential of structures vol.138, 2017, https://doi.org/10.1016/j.jcsr.2017.06.038
  2. Effects of Postelastic Stiffness Ratio on Dynamic Increase Factor in Progressive Collapse vol.31, pp.6, 2017, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001109
  3. Free vibrations of precast modular steel-concrete composite railway track slabs vol.24, pp.1, 2016, https://doi.org/10.12989/scs.2017.24.1.113
  4. Effects of finite element modeling and analysis techniques on response of steel moment-resisting frame in dynamic column removal scenarios vol.19, pp.3, 2018, https://doi.org/10.1007/s42107-018-0027-2
  5. Evaluation of dynamic increase factor in progressive collapse analysis of steel frame structures considering catenary action vol.30, pp.3, 2019, https://doi.org/10.12989/scs.2019.30.3.253
  6. Progressive collapse analysis of stainless steel composite frames with beam-to-column endplate connections vol.36, pp.4, 2020, https://doi.org/10.12989/scs.2020.36.4.427
  7. Seismic progressive collapse mitigation of buildings using cylindrical friction damper vol.20, pp.1, 2021, https://doi.org/10.12989/eas.2021.20.1.001
  8. Evaluation of equivalent friction damping ratios at bearings of welded large-scale domes subjected to earthquakes vol.40, pp.4, 2021, https://doi.org/10.12989/scs.2021.40.4.517
  9. Machine learning applications for assessment of dynamic progressive collapse of steel moment frames vol.36, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.12.067