Coupled systems mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Influence of interface on the behavior of infilled frame subjected to lateral load using linear analysis

  • Senthil, K. (National Institute of Technology Jalandhar) ;
  • Satyanarayanan, K.S. (SRM University)
  • Received : 2016.03.19
  • Accepted : 2016.05.10
  • Published : 2016.06.25
⟨ Previous Next ⟩

Abstract

Two dimensional numerical investigations were carried out to study the influence of interface thickness and their pattern on the behavior of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The linear elastic analysis was carried out on one and two bay structural systems as well as the influence of number of stories was studied by varying the number of stories as single, three and five. The cement mortar was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The interface was recognized as one sided, two sided, three sided and four sided and their effect was studied by removing the interface material between the reinforced concrete frame and masonry infill. The effect of lateral loads on infill masonry wall was also studied by varying assumed loads as 10, 20, 30, 40, 50 and 60 kN. The behavior of infilled frames studied has revealed that there is a maximum influence of interface thickness and interface pattern corresponding to 10 mm thickness. In general, the lateral displacement of frame is increased linearly with increase in lateral loads.

Keywords

References

  1. Abdel-Hafez, L.M., Abouelezz, A.E.Y. and Elzefeary, F.F. (2015), "Behavior of masonry strengthened infilled reinforced concrete frames under in-plane load", Hous. Building Nat. Res. Center, 11, 213-223.
  2. Al-Chaar, G., Issa, M. and Sweeney, S. (2002), "Behavior of masonry infilled non-ductile reinforced concrete frames, J. Struct. Eng. - ASCE, 128, 1055-1063. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1055)
  3. Anil, O. and Altin, S. (2007), "An experimental study on reinforced concrete partially infilled frames", Eng. Struct., 29, 449-460. https://doi.org/10.1016/j.engstruct.2006.05.011
  4. Asteris, P.G. (2008), "Finite element micro-modeling of infilled frames", Elect. J. Struct. Engg., 8, 1-11.
  5. Buonopane, S.G. and White, R.N. (1999), "Pseudodynamic testing of masonry-infilled reinforced concrete frame" , J. Struct. Eng. - ASCE, 125(6), 578-589. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(578)
  6. CSI (2000), "Integrated Software for Structural Analysis and Design: Analysis Reference Manual", Computer and Structures, Inc., Berkeley, CA.
  7. Dhanasekhar, M. and Page, A.W. (1986), "The influence of brick masonry infill properties on the behavior of infilled frames", Proc. Inst. Civ. Eng., Part 2(81), 593-605.
  8. Dogangun, A., Ural, A. and Livaoglu, R. (2008), "Seismic performance of masonry buildings during recent earthquakes in turkey", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17.
  9. Erdik, M. and Aydinoglu, N. (2003), "Earthquake vulnerability of buildings in Turkey", Proceedings of the 3rd International Symposium on Integrated Disaster Risk Management, Japan, July 3-5.
  10. Eshghi, S. and Pourazin, K. (2009), "In-Plane behavior of confined masonry walls -with and without opening", Int. J. Civil Eng., 7(1), 49-60.
  11. Ghosh, A.K. and Amde, A.M. (2002), "Finite element analysis of infilled frames" J. Struct. Eng. - ASCE, 128(7), 881-889. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:7(881)
  12. Girish, K.B. and Achyutha, H. (1996), "Nonlinear finite element analysis of reinforced concrete frames with brick masonry infill's under lateral loads", J. Struct. Eng. - ASCE, 22, 211-220.
  13. Ibrahimbegovic, A. (1990) "A Novel membrane finite element with an enhanced displacement interpolation", J. Finite Elem. Anal. Des., 7, 167-179. https://doi.org/10.1016/0168-874X(90)90008-3
  14. Ibrahimbegovic, A., Taylor, R.L. and Wilson, E.L. (1990), "A robust membrane quadrilateral element with drilling degrees of freedom", Int. J. Numer. Meth. Eng., 30, 445-457, https://doi.org/10.1002/nme.1620300305
  15. Ibrahimbegovic, A. and Wilson, E.L. (1991), "Thick shell and solid finite elements with independent rotation fields", Int. J. Numer. Meth. Eng., 31, 1393-1414. https://doi.org/10.1002/nme.1620310711
  16. IS 456 (2000), "Indian standard plain and reinforced concrete code of practice", Bureau of Indian Standards, New Delhi, India.
  17. IS 13920 (1993), "Indian standard ductile detailing of reinforced concrete structures subjected to seismic forces", Bureau of Indian Standards, New Delhi, India.
  18. Kaushik, H.B., Rai, D.C. and Jain, S.K. (2006) "Code approaches to seismic design of masonry infilled reinforced concrete frames: A state-of-the-art review", Earthq. Spectra, 22, 961-983. https://doi.org/10.1193/1.2360907
  19. Khoshnoud, H.R. and Marsono, K. (2016), "Experimental study of masonry infill reinforced concrete frames with and without corner openings", Struct. Eng. Mech., 57(4), 641-656. https://doi.org/10.12989/sem.2016.57.4.641
  20. Klingner, R.E. and Bertero, V.V. (1978), "Earthquake resistance of infilled frames", J. Struct. Div. - ASCE, 104(6), 973-987.
  21. Leite, J. and Lourenco, P.B. (2010), "On the Influence of masonry infills in concrete buildings", Proceedings of the 10th International Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, Scotland.
  22. Mehrabi, A.B. and Singh, P.B. (1997), "Finite element modeling of masonry infilled RC frames", J. Struct. Eng. - ASCE, 123(5), 604-613. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(604)
  23. Mondal, G. and Jain, S.K. (2008), "Lateral stiffness of masonry infilled reinforced concrete frames with central opening", Earthq. Spectra, 24(3), 701-723. https://doi.org/10.1193/1.2942376
  24. New Zealand Concrete Masonry Manual, (2011), "New Zealand Concrete Masonry Association", Inc, Section 3.4, Page 1-3.
  25. Okail, H., Abdelrahman, A., Abdelkhalik, A. and Metwaly, M. (2014), "Experimental and analytical investigation of the lateral load response of confined masonry walls", Hous. Building Nat. Res. Center, Doi:10.1016/j.hbrcj.2014.09.004.
  26. Rai, D.C. (2005), "Review of design codes for masonry buildings" Report IITK-GSDMA-EQ10-V1.0. A -Earthquake Codes. Indian Institute of Technology (Kanpur): Department of Civil Engineering.
  27. Riddington, J.R. (1984), "The influence of initial gaps on infilled frame behavior", Proc. Inst. Civ. Eng., Part 2(77), 295-310.
  28. Yang, C.C., Lin, Y.Y. and Hung, R. (1996), "Elastic modulus of concrete affected by elastic moduli of mortar and artificial aggregate", J. Mar. Sci. Technol., 4(1) 43-48.

Cited by

  1. Experimental investigation of interface stiffness between concrete masonry infill and reinforced concrete frames vol.171, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2018.06.035