참고문헌
- Han, J.E., and Nam, K.S., "A Study on Functional Development of Thermo-Bed through Structural Improvement and Urushi Lacquer Finishing", Korean Society of Design Science, Vol. 24, No. 4, 2011, pp. 57-66.
- Kwon, D.J., Shin, P.S., Choi, J.Y., Moon, S.O., and Park, J.M., "Interfacial and Mechanical Properties of Different Heat Treated Wood and Evaluation of Bonding Property between Stone and Wood for Rock Bed", Journal of Adhesion and Interface, Vol. 16, No. 2, 2015, pp. 69-75. https://doi.org/10.17702/jai.2015.16.2.69
- Lee, T.H., "Review of The Research and Development of Ceramic Matrix Composite Materials and Future Works", Composites Research, Vol. 27, No. 4, 2014, pp. 123-129. https://doi.org/10.7234/composres.2014.27.4.123
- MacVicar, R., Matuana, L.M., and Balatinecz J.J., "Aging Mechanisms in Cellulose Fiber Reinforced Cement Composites", Cement and Concrete Composites, Vol. 21, 1999, pp. 189-196. https://doi.org/10.1016/S0958-9465(98)00050-X
- Evgin, T., Koca, H.D., Horny, N., Tavman, H.I., Chirtoc, M., Omastova, M., and Novak, I., "Effect of Aspect Ratio on Thermal Conductivity of High Density Polyethylene/Multi-Walled Carbon Nanotubes Nanocomposites", Composites: Part A, Vol. 82, 2016, pp. 208-213. https://doi.org/10.1016/j.compositesa.2015.12.013
- Gardea, F., and Lagoudas, D.C., "Characterization of Electrical and Thermal Properties of Carbon Nanotube/Epoxy Composites", Composites Part B: Engineering, Vol. 56, 2014, pp. 611-620. https://doi.org/10.1016/j.compositesb.2013.08.032
- Moisala, A., Li, Q., Kinloch, I.A., and Windle, A.H., "Thermal and Electrical Conductivity of Single- and Multi-Walled Carbon Nanotube-Epoxy Composites", Composites Science and Technology, Vol. 66, 2006, pp. 1285-1288. https://doi.org/10.1016/j.compscitech.2005.10.016
- Wang, Z.J., Kwon, D.J., Park, J.K., Lee, W.I., and Park, J.M., "Microstructure and Ablation Performance of CNT-Phenolic Nanocomposites", Composites Research, Vol. 26, No. 5, 2013, pp. 309-314. https://doi.org/10.7234/composres.2013.26.5.309
- Park, J.M., Kwon, D.J., Wang, Z.J., Roh, J.U., Lee, W.I., Park, J.K., and DeVries, K.L., "Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/Phenolic Composites", Composites: Part B, Vol. 67, 2014, pp. 22-29. https://doi.org/10.1016/j.compositesb.2014.06.022
- Guru, K., Mishra, S.B., and Shukla, K.K., "Effect of Temperature and Functionalization on the Interfacial Properties of CNT Reinforced Nanocomposites", Applied Surface Science, Vol. 349, 2015, pp. 59-65. https://doi.org/10.1016/j.apsusc.2015.04.196
- Tang, Y.J., Alva, G., Huang, X., Su, D., Liu, L., and Fang, G., "Thermal Properties and Morphologies of MA-SA Eutectics/CNTs as Composite PCMs in Thermal Energy Storage", Energy and Buildings, Vol. 127, 2016, pp. 603-610. https://doi.org/10.1016/j.enbuild.2016.06.031
- Wang, Z.J., Kwon, D.J., Gu, G.Y., Kim, H.S., Kim, D.S., Lee, C.S., and Park, J.M., "Evaluation of Mechanical Properties and Damage Sensing of CNT-Polypropylene Composites by Electro-Micromechanical Techniques", Composites Research, Vol. 26, No. 1, 2013, pp. 1-6. https://doi.org/10.7234/kscm.2013.26.1.1
- Wang, B., Bai, Y., Hu, X., and Lu, P., "Enhanced Epoxy Adhesion between Steel Plates by Surface Treatment and CNT/Short-Fibre Reinforcement", Composites Science and Technology, Vol. 127, 2016, pp. 149-157 https://doi.org/10.1016/j.compscitech.2016.03.008
- Genna, D., Gaboury, D., Moore, L., and Mueller, W.U., "Use of Micro-XRF Chemical Analysis for Mapping Volcanogenic Massive Sulfide Related Hydrothermal Alteration: Application to the Subaqueous Felsic Dome-Flow Complex of the Cap d'Ours Section, Glenwood Rhyolite, Rouyn-Noranda, Quebec, Canada", Journal of Geochemical Exploration, Vol. 108, 2011, pp. 131-142. https://doi.org/10.1016/j.gexplo.2010.12.001