Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study on the Preferential Oxidation Reactor Performance Using a Water Cooling Heat Removal for Polymer Electrolyte Membrane Fuel Cell

수냉식 방열을 이용한 연료전지용 PROX 반응기의 성능에 관한 실험적 연구

  • KIM, JINSAN (Department of Mechanical Design Engineering, Hanyang University) ;
  • JO, TAEHYUN (Department of Mechanical Design Engineering, Hanyang University) ;
  • KOO, BONCHAN (Department of Mechanical Engineering, Hanyang University) ;
  • LEE, DOHYUNG (Department of Mechanical Design Engineering, Hanyang University)
  • 김진산 (한양대학교 기계설계공학과) ;
  • 조태현 (한양대학교 기계설계공학과) ;
  • 구본찬 (한양대학교 기계공학과) ;
  • 이도형 (한양대학교 기계설계공학과)
  • Received : 2016.08.12
  • Accepted : 2016.10.30
  • Published : 2016.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

Fuel cell is a device for producing electricity by using the hydrogen produced by the fuel processor. At this time, CO is also created by the fuel processor. The resulting CO enters the stack where is produce electricity and leads to the adsorption of anode catalyst, finally the CO poisoning occurs. Stack which occurred CO poisoning has a reduction in performance and shelf life are gradually fall because they do not respond to hydrogen. In this paper, experiments that using a PROX reactor to prevent CO poisoning were carried out for removing the CO concentration to less than 10ppm range available in the fuel cell. Furthermore experiments by the PROX reaction was designed and manufactured with a water-cooling heat exchange reactor to maintain a suitable temperature control due to the strong exothermic reaction.

Keywords

References

  1. S. Mekhilef, R. Saidur, A. Safari, 2012, "Comparative study of different fuel cell technologies", Renewable and Sustainable Energy Reviews, 16(2012), 981-989. https://doi.org/10.1016/j.rser.2011.09.020
  2. P. Zegers, 2006, "Fuel cell commercialization : The key to a hydrogen economy", Journal of Power Source, 154(2006), 497-502. https://doi.org/10.1016/j.jpowsour.2005.10.051
  3. S. H. Park, 2014, "A Study on the Combustion Characteristics of Steam Reformer for Fuel Cell", Master's thesis, Hanyng univ.
  4. J. J. Baschuck, X. Li, 2001, "Carbon monoxi de poisoning of proton exchange membrane fuel cells", International Journal of Energy Research, Vol. 25, 695-713. https://doi.org/10.1002/er.713
  5. G. Xu, Z. G. Zhang, 2006, "Preferential CO oxidation on Ru/$Al_2O_3$ catalyst : An investig ation by considering the simultaneously inv olved methanation", Journal of Power Source, 157(2006), 64-77. https://doi.org/10.1016/j.jpowsour.2005.07.028
  6. C. Galletti, S. Specchia, G. Saracco, V. Spec chia, 2010, "CO-selective methanation over Ru-${\gamma}$ $Al_2O_3$ catalysts in $H_2$-rich gas for PEM FC applications", Chemical Engineering Science, 65(2010), 590-596. https://doi.org/10.1016/j.ces.2009.06.052
  7. S. Srinivas, A. Dhingra, H. Im, E. Gulari, 2004, "A scalable silicon microreactor for preferential CO oxidation : performance comparison with a tubular packed-bed microreactor", Applied Catalysis A: General, 274(2004), 285-293. https://doi.org/10.1016/j.apcata.2004.07.012
  8. Marin O' Connell, G. Kolb, K. Schelhaas, J. Schuerer, D. Tiemann, A. Ziogas, V. Hassel, 2010, "The development and evaluation of microstructured reactors for the water gasshift and preferential oxidation reactions in the 5kW range", International Journal of Hydrogen energy, 35(2010), 2317-2327.
  9. G. Kolb, J. Schurer, D. Tiemann, M. Wichert, R. Zapf, V. Hessel, H. Lowe, 2007, "Fuel processing in integrated micro-structured heat-exchanger reactors", Journal of Power Source, 171(2007), 198-204. https://doi.org/10.1016/j.jpowsour.2007.01.006
  10. F. Marino, C. Descrome, D. Duprez, 2004, "Noble metal catalysts for the preferential oxidation of carbon monoxide in the presence of hydrogen (PROX)", Appliced Catalysis B : Environmental, 54(2004), 59-66. https://doi.org/10.1016/j.apcatb.2004.06.008
  11. S. H. Choi, J. M. Bae, 2011, "Experiment of CO Cleaning Process in DME Autothermal Reformate Gas for PEMFC Application", The Korean Hydrogen and New Energy Society, Vol. 22, No. 4, pp. 474-480.
  12. C. Yongtaek, H.G. Stenger, 2004, "Kinetics, simulation and insights for CO selective oxidation in fuel cell applications", Journal of Power Source, 129(2004), 246-254. https://doi.org/10.1016/j.jpowsour.2003.11.038
  13. W. L. Yoon, J. W. Park, Y. W. Rhee, M. W. Han, J. H. Jeong, J. S. Park, H. Jung, H. T. Lee, C. S. Kim, 2003, "Operating Characte ristics of Integrated NG Reformer system f or 5kW class PEM Fuel Cell, HWAHAK KO NGHAK, Vol. 41, No. 3, June, 2003, pp. 389-396.