DOI QR코드

DOI QR Code

Design Requirements Review and Time-dependant CP Performance Analysis for Corrosion Protection Design Optimization of Offshore Structure

해상구조물의 방식설계 최적화를 위한 설계요건 분석 및 시간의존적 방식성능 해석

  • Received : 2016.08.29
  • Accepted : 2016.09.07
  • Published : 2016.10.31

Abstract

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

Keywords

References

  1. J. Wintle and J. Sharp, Requirements for life extension of ageing offshore production installations, TWI report (2008).
  2. Zeinoddini et al., Renaining fatigue life assessment of aging fixed steel offshore jacket platforms, Structure and infrastructure engineering, Vol. 12, No. 2 (2016) 223-238. https://doi.org/10.1080/15732479.2015.1009122
  3. Ji. C, Li. S, Structural Reliability Assessment of Aging Offshore Platforms With Corrosion and Cracks, Proceedings of the international conference of offshore mechanics and arctic engineering, Vol. 27, No. 2 (2008) 585-590.
  4. DNV RP B401, Cathodic protection design, DNV (2010).
  5. ISO 12944-1, Paint and varnishes-corrosion protection of steel structures by protective paint systems Part 1 : General introduction, ISO (1998).
  6. NACE RP 0176, Corrosion control of submerged areas of permanently installed steel offshore structures associated with petroleum production, NACE (2003).
  7. ISO 11303, Corrosion of metals and alloys-Guidelines for selection of protection methods against atmospheric corrosion, ISO (2002).
  8. NORSOK M-001, Materials selection, NORSOK (2004).
  9. ISO 12944-2, Paint and varnishes-corrosion protection of steel structures by protective paint systems Part 2 : Classification of environments, ISO (1998).
  10. NACE SP 0108, Corrosion control of offshore structures by protective coatings, NACE (2008).
  11. ISO 12944-5, Paint and varnishes-corrosion protection of steel structures by protective paint systems Part 5 : protective paint systems, ISO (2007).
  12. ISO 13174, Cathodic protection of harbour installations, ISO (2012).