참고문헌
- De Almeida, A., Santos, B., Paolo, B., and Quicheron, M., 2014, Solid state lighting review : Potential and challenges in Europe, Renewable and Sustainable Energy Reviews, Vol. 34, pp. 30-48. https://doi.org/10.1016/j.rser.2014.02.029
- Jang, D., Yu, S. H., and Lee, K. S., 2012, Multidisciplinary optimization of a pin-fin radial heat sink for LED lighting applications, International Journal of Heat and Mass Transfer, Vol. 55, pp. 515-521. https://doi.org/10.1016/j.ijheatmasstransfer.2011.11.016
- Yu, S. H., Lee, K. S., and Yook, S. J., 2010, Natural convection around a radial heat sink, International Journal of Heat and Mass Transfer, Vol. 53, pp. 2935-2938. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.032
- Yu, S. H., Lee, K. S., and Yook, S. J., 2011, Optimum design of a radial heat sink under natural convection, International Journal of Heat and Mass Transfer, Vol. 54, pp. 2499-2505. https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.012
- Choi, S. H., Song, S. M., and Kim, D. N., 2011, The feasibility of LED lighting as the street light's lighting, Journal of the Architectural Institute of Korea Planning and Design, Vol. 27, pp. 65-72.
- Park, S. J., Jang, D., Yook, S. J., and Lee, K. S., 2016, Optimization of chimney design for cooling efficiency of a radial heat sink in a LED downlight, Energy Conversion and Management, Vol. 114, pp. 180-187. https://doi.org/10.1016/j.enconman.2016.02.024
- Jang, D., Yook, S. J., and Lee, K. S., 2014, Optimum design of a radial heat sink with a fin-height profile for high-power LED lighting applications, Applied Energy, Vol. 116, pp. 260-268. https://doi.org/10.1016/j.apenergy.2013.11.063
- Park, S. J., Jang, D., and Lee, K. S., 2015, Thermal performance improvement of a radial heat sink with a hollow cylinder for LED downlight applications, International Journal of Heat and Mass Transfer, Vol. 89, pp. 1184-1189. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.037
- Luo, X., Xiong, W., and Liu, S., 2008, A simplified thermal resistance network model for high power LED street lamp, Proceedings, International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP, pp. 1-7.
- Ma, H. K., Chen, B. R., Lan, H. W., and Chao, C. Y., 2010, Study of an LED device with a honeycomb heatsink, Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 289-298.
- Tang, H., Li, D., Pan, M., Yang, T., Yuan, C., and Fan, X., 2013, Thermal analysis and optimization design of LED streetlight module, 10th China International Forum on Solid State Lighting, China SSL, pp. 193-197.
- www.lglighting.co.kr.
- Ishizuka, M. and Nakagawa, S., 2008, Study on the natural air cooling design of electronic equipment casings : Effects of the height and size of outlet vent on the flow resistance, 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM, pp. 555-560.
- Petroski, J., Norley, J., Schober, J., Reis, B., and Reynolds, R. A., 2010, Conduction cooling of large LED array systems, 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM, pp. 1-10.
- Michael, F. M., 2008, Radiative Heat Transfer, Second Edition, Academic Press, San Diego, pp. 8, 99.
- Boulet, P., Gerardin, J., Acem, Z., Parent, G., Collin, A., Pizzo, Y., and Porterie, B., 2014, Optical and radiative properties of clear PMMA samples exposed to a radiant heat flux, International Journal of Thermal Sciences, Vol. 82, pp. 1-8. https://doi.org/10.1016/j.ijthermalsci.2014.03.013
- Moffat, R. J., 1988, Describing the uncertainties in experimental results, Experimental Thermal and Fluid Science, Vol. 1, pp. 3-17. https://doi.org/10.1016/0894-1777(88)90043-X