The Journal of Advanced Prosthodontics

  • 제8권5호
  • /
  • Pages.339-344
  • /
  • 2016
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments

  • 투고 : 2016.01.28
  • 심사 : 2016.08.08
  • 발행 : 2016.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. Pre-surface treatments of coping materials have been recommended to enhance the bonding to the veneering ceramic. Little is known on the effect on shear bond strength, particularly with new coping material. The aim of this study was to investigate the shear bond strength of veneering ceramic to three coping materials: i) metal alloy (MA), ii) zirconia oxide (ZO), and iii) lithium disilicate (LD) after various pre-surface treatments. MATERIALS AND METHODS. Thirty-two (n = 32) discs were prepared for each coping material. Four pre-surface treatments were prepared for each sub-group (n = 8); a) no treatment or control (C), b) sandblast (SB), c) acid etch (AE), and d) sandblast and acid etch (SBAE). Veneering ceramics were applied to all discs. Shear bond strength was measured with a universal testing machine. Data were analyzed with two-way ANOVA and Tukey's multiple comparisons tests. RESULTS. Mean shear bond strengths were obtained for MA ($19.00{\pm}6.39MPa$), ZO ($24.45{\pm}5.14MPa$) and LD ($13.62{\pm}5.12MPa$). There were statistically significant differences in types of coping material and various pre-surface treatments (P<.05). There was a significant correlation between coping materials and pre-surface treatment to the shear bond strength (P<.05). CONCLUSION. Shear bond strength of veneering ceramic to zirconia oxide was higher than metal alloy and lithium disilicate. The highest shear bond strengths were obtained in sandblast and acid etch treatment for zirconia oxide and lithium disilicate groups, and in acid etch treatment for metal alloy group.

키워드

참고문헌

  1. Tan K, Pjetursson BE, Lang NP, Chan ES. A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clin Oral Implants Res 2004;15:654-66. https://doi.org/10.1111/j.1600-0501.2004.01119.x
  2. Coornaert J, Adriaens P, De Boever J. Long-term clinical study of porcelain-fused-to-gold restorations. J Prosthet Dent 1984;51:338-42. https://doi.org/10.1016/0022-3913(84)90217-8
  3. Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557-62. https://doi.org/10.1016/j.prosdent.2004.09.015
  4. Saito A, Komine F, Blatz MB, Matsumura H. A comparison of bond strength of layered veneering porcelains to zirconia and metal. J Prosthet Dent 2010;104:247-57. https://doi.org/10.1016/S0022-3913(10)60133-3
  5. Smielak B, Klimek L. Effect of hydrofluoric acid concentration and etching duration on select surface roughness parameters for zirconia. J Prosthet Dent 2015;113:596-602. https://doi.org/10.1016/j.prosdent.2015.01.001
  6. Sriamporn T, Thamrongananskul N, Busabok C, Poolthong S, Uo M, Tagami J. Dental zirconia can be etched by hydrofluoric acid. Dent Mater J 2014;33:79-85. https://doi.org/10.4012/dmj.2013-243
  7. Knap FJ, Ryge G. Study of bond strength of dental porcelain fused to metal. J Dent Res 1966;45:1047-51. https://doi.org/10.1177/00220345660450040501
  8. Bagby M, Marshall SJ, Marshall GW Jr. Metal ceramic compatibility: a review of the literature. J Prosthet Dent 1990;63:21-5. https://doi.org/10.1016/0022-3913(90)90259-F
  9. Shell JS, Nielsen JP. Study of the bond between gold alloys and porcelain. J Dent Res 1962;41:1424-37. https://doi.org/10.1177/00220345620410062101
  10. Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent 2003;89:374-80. https://doi.org/10.1067/mpr.2003.42
  11. Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 2004;91:349-55. https://doi.org/10.1016/j.prosdent.2004.02.009
  12. Anusavice KJ. Noble metal alloys for metal-ceramic restorations. Dent Clin North Am 1985;29:789-803.
  13. Hammad IA, Talic YF. Designs of bond strength tests for metal-ceramic complexes: review of the literature. J Prosthet Dent 1996;75:602-8. https://doi.org/10.1016/S0022-3913(96)90244-9
  14. de Melo RM, Travassos AC, Neisser MP. Shear bond strengths of a ceramic system to alternative metal alloys. J Prosthet Dent 2005;93:64-9. https://doi.org/10.1016/j.prosdent.2004.10.017
  15. Joias RM, Tango RN, Junho de Araujo JE, Junho de Araujo MA, Ferreira Anzaloni Saavedra Gde S, Paes-Junior TJ, Kimpara ET. Shear bond strength of a ceramic to Co-Cr alloys. J Prosthet Dent 2008;99:54-9. https://doi.org/10.1016/S0022-3913(08)60009-8
  16. Choi BK, Han JS, Yang JH, Lee JB, Kim SH. Shear bond strength of veneering porcelain to zirconia and metal cores. J Adv Prosthodont 2009;1:129-35. https://doi.org/10.4047/jap.2009.1.3.129
  17. Ashkanani HM, Raigrodski AJ, Flinn BD, Heindl H, Mancl LA. Flexural and shear strengths of ZrO2 and a high-noble alloy bonded to their corresponding porcelains. J Prosthet Dent 2008;100:274-84. https://doi.org/10.1016/S0022-3913(08)60206-1
  18. Ishibe M, Raigrodski AJ, Flinn BD, Chung KH, Spiekerman C, Winter RR. Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia cores. J Prosthet Dent 2011;106:29-37. https://doi.org/10.1016/S0022-3913(11)60090-5
  19. Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 2008;24:1556-67. https://doi.org/10.1016/j.dental.2008.03.028
  20. Umer S, Annapoor ni H, Abraham A, Palathingal P. Comparative evaluation of shear bond strengths of zirconia core and veneer with lithium disilicate core and veneer - an in vitro study. Int J Cur Res Rev 2013;5:111-7.
  21. Ting S, Lonquan S, Bin D, Ning W. Shear bond strengths between ceramic cores and veneering ceramics of dental bi-layered ceramic systems and the sensitivity to thermocycling. Ceram-Silik 2012;56:238-44.
  22. Derand P, Derand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 2000;13:131-5.
  23. Kim HJ, Lim HP, Park YJ, Vang MS. Effect of zirconia surface treatments on the shear bond strength of veneering ceramic. J Prosthet Dent 2011;105:315-22. https://doi.org/10.1016/S0022-3913(11)60060-7
  24. Saka M, Yuzugullu B. Bond strength of veneer ceramic and zirconia cores with different surface modifications after microwave sintering. J Adv Prosthodont 2013;5:485-93. https://doi.org/10.4047/jap.2013.5.4.485
  25. Fischer J, Grohmann P, Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mater J 2008;27:448-54. https://doi.org/10.4012/dmj.27.448
  26. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999;15:426-33. https://doi.org/10.1016/S0109-5641(99)00070-6
  27. Chen L, Suh BI. Bonding of resin materials to all-ceramics: A review. Curr Res Dent 2012;3:7-17. https://doi.org/10.3844/crdsp.2012.7.17
  28. Mackert JR Jr, Ringle RD, Parry EE, Evans AL, Fairhurst CW. The relationship between oxide adherence and porcelain-metal bonding. J Dent Res 1988;67:474-8. https://doi.org/10.1177/00220345880670020801
  29. Borges GA, Sophr AM, de Goes MF, Sobrinho LC, Chan DC. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 2003;89:479-88. https://doi.org/10.1016/S0022-3913(02)52704-9

피인용 문헌

  1. Comparison of traditional and simplified methods for repairing CAD/CAM feldspathic ceramics vol.9, pp.4, 2017, https://doi.org/10.4047/jap.2017.9.4.257
  2. The Effect of Surface Treatment on Shear Bond Strength between Y-TZP and Veneer Ceramic: A Systematic Review and Meta-Analysis pp.1059941X, 2018, https://doi.org/10.1111/jopr.12727
  3. Shear Bond Strength of Porcelain Veneering to Nickel-Chromium, Chromium-Cobalt, Zirconia and Lithium Disilicate vol.32, pp.1, 2020, https://doi.org/10.30699/jidai.32.1.2.12