References
- ExxonMobil, The Outlook for Energy: A View to 2040, (2012)
- International Energy Agency, Golden Rules for a Golden Age of Gas - World Energy Outlook, (2012)
- KOTZOT, Heinz J. Overview of the LNG Industry Seminar: Gas Treatment, Liquefaction, and Storage, (2003)
- ASM Handbook (6) (1993), 1016-1019
- Hye-Jeong Shim, Trade Focus, IIT, 13 (62) (2014)
- J.K. Choi, High Manganese Austenitic Steel for Cryogenic Applications, ISOPE, 4 (2012) 29-35
- AA Saleh, Texture evolution of cold rolled and annealed Fe-24Mn-3Al-2Si-1Ni-0.06 C TWIP steel, MAT SCI ENG A, 528 (2011) 4537-4549 https://doi.org/10.1016/j.msea.2011.02.055
- DB Santos, Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06 C TWIP steel, MAT SCI ENG A, 528 (2011) 3545-3555 https://doi.org/10.1016/j.msea.2011.01.052
- AA Gazder, Microtexture analysis of cold-rolled and annealed twinning-induced plasticity steel, Scripta Mater. 65 (2011) 560-563 https://doi.org/10.1016/j.scriptamat.2011.06.026
- L.M. Roncery, Welding of twinning-induced plasticity steels, Scripta Mater. 66 (2012) 997-1001 https://doi.org/10.1016/j.scriptamat.2011.11.041
- Y. Tomota, Microstructural dependence of Fe-high Mn tensile behavior, Metall. Mater. Trans. A, 17 (1986) 537-547 https://doi.org/10.1007/BF02643961
- Y. Tomota, The relationship between toughness and microstructure in Fe-high Mn binary alloys, Metall. Mater. Trans. A, 18 (1987) 1073-1081 https://doi.org/10.1007/BF02668556
- Bo-Young Jeong, Characteristics of Dissimilar CO2 Laser Welding for High Mn Steel and Low Carbon Steel, Journal of KWJS, 28 (2) (2010) 36-41 (in Korean)
- P. Yang, Dependence of deformation twinning on grain orientation in a high manganese steel, Scripta Mater. 55 (2006) 629-631 https://doi.org/10.1016/j.scriptamat.2006.06.004
- L. Meng, Dependence of deformation twinning on grain orientation in compressed high manganese steels, Scripta Mater. 56 (2007) 931-934 https://doi.org/10.1016/j.scriptamat.2007.02.028
- Singon Kang, Orientation-dependent indentation modulus and yielding in a high Mn twinning-induced plasticity steel, MAT SCI ENG A, 532 (2012) 500-504 https://doi.org/10.1016/j.msea.2011.10.116
Cited by
- The Effect of Eutectic Structure on the Creep Properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag Solders vol.7, pp.12, 2017, https://doi.org/10.3390/met7120540