DOI QR코드

DOI QR Code

A Numerical Analysis on Suitable Combustion Chamber Geometry of Common Rail Diesel Engine for Electric Generation

발전용 커먼레일 디젤엔진에 적합한 최적화 연소실형상 설계를 위한 수치해석

  • Received : 2016.07.25
  • Accepted : 2016.08.30
  • Published : 2016.08.30

Abstract

This paper presents characteristics of diesel combustion and emissions according to adoption of various combustion chamber geometry. In order to suggest suitable combustion chamber geometry of the common rail diesel engine for electric generative use, 5 type of geometry chamber was found performance for combustion chamber to respond fuel efficiency. Combustion chamber geometry affects combustion characteristics due to change target area of spray in the combustion chamber and the main factor was the bowl aspect ratio of combustion chamber. Using the results of simulation, the effects of the variable combustion chamber can be improved the fuel efficiency for electric generation.

본 연구는 연소실 형상 변화에 따른 디젤연소와 배출가스의 특성에 대해 살펴보았다. 발전용 커먼레일 디젤엔진의 최적화 설계를 위한 연소실형상을 제시하기 위해 5가지 타입형상을 연비 측면에서 계산하였다. 연소실 형상은 연소 시 분무면적을 변화시킴으로서 연소특성에 영향을 주었으며 이러한 주요요소는 연소실 형상 비였다. 이러한 수치해석의 결과는 연소실 형상의 변화는 발전기의 연비 개선을 가능하도록 한다고 판단되었다.

Keywords

References

  1. Lyle M. Pickett, Dennis L. Siebers, "Non- sooting, Low Flame Temperature Mixing- Controlled DI Diesel Combustion", SAE 2004-01-1399, 2004.
  2. Caroline L. Genzale and Rolf D. Reitz, "Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low- Temperature Combustion in a Heavy-Duty Diesel Engine", SAE 2008-01-1330, 2008
  3. Liu Shiling, C. H. John, H. Jacqueline, Chen, Heinz Pitsch, "Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow", Combustion and Flame, Vol. 137, pp. 320-339, 2004. https://doi.org/10.1016/j.combustflame.2004.01.011
  4. Shiling Liu, John C. Hewson, Jacqueline H. Chen, Heinz Pitsch, "Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow", Combustion and Flame, Vol. 137, pp. 320-339, 2004 https://doi.org/10.1016/j.combustflame.2004.01.011
  5. D. Y. Kim, Y. C. Han, S. H. Joo and P. W. Park, "The Effect of the Combustion Chamber Shape to the Combustion Process of the D.I Diesel Engine", Transaction of the Korean Society of Automotive Engineers Vol 1, No 12, pp. 66-73, 2004.
  6. J. Y. Cho and J. C. Bang, "The Effect of the Combustion Chamber Shape to the Combustion Process of the D.I Diesel Engine", Transaction of the Korean Society of Automotive Engineers Vol 9, No 10, pp. 7-12, 2003.