DOI QR코드

DOI QR Code

Development of Air Cushion Transporter Using the Pneumatic Floating Pad

공기부양판을 적용한 에어쿠션 트랜스포터의 개발

  • Jung, Hyunmok (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Hong, Junhee (Department of Mechanical Engineering, Chungnam National University) ;
  • Yun, Dongwon (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Park, Heechang (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Kim, Byungin (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Lee, Sunghwi (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials)
  • Received : 2016.07.27
  • Accepted : 2016.09.19
  • Published : 2016.10.15

Abstract

Recent trends in transport system for carrying heavy freight are that demands of a high efficiency, economic efficiency, convenience and safety are increased. Conventional transport systems were poor in transport efficiency and economic efficiency. And Safety problems can be caused to products and workers. In order to overcome these problems, an air cushion transport device with a high-pressure air is required. The air cushion transporter is a device for reducing the frictional force of floor surface and lifting the heavy freight by spraying the high-pressure air to the floor. Technology to float and transfer freight using high-pressure air is very convenient and initial cost can be reduced. In this paper, the study on the levitation performance and transport efficiency of air cushion transport system is conducted and verified that air cushion transporter has a significantly higher transport efficiency than conventional heavy handling systems.

Keywords

References

  1. Yun, D. W., Park, H. C., Kim, B. I., Lee, S. H., Jang, S. I., Hong, I. P., 2015, Development of the Air Cushion Carrier Equipment for Carrying Heavy Loads, Journal of the Korean Society For Power System Engineering, 19:5 17-24.
  2. Yim, W. S., Cha, S. W., Jeong, P. J., 1999, The Design of Concept Car by Using the Compressed Air, Proceedings of the Korean Society of Precision Engineering, 839-842
  3. Lee, T. G., Yu, J. S., Jung, H. J., Kim, J. H., Kim, J. H., 2013, Development of the Air Floating Conveyor System for the Large Glass Sheet, Journal of the Korean Society of Manufacturing Technology Engineers, 22:4 635-642. https://doi.org/10.7735/ksmte.2013.22.4.635
  4. Lho, T. J., Shon, T. Y., 2008, Air Fluid Analysis between Porous PE-plate and Glass in Air-floating FPD Conveyor System, Journal of Academia-industrial Technology, 9:4 878-885.
  5. Kim, J. H., Jeong, Y. S., Lee, T. G., Kim, T. H., Jung, H. J., 2013, Non-contact Level on Air Levitation Table with Porous Chamber Array, Journal of the Korean Society of Manufacturing Technology Engineers, 22:6 913-920. https://doi.org/10.7735/ksmte.2013.22.6.913
  6. Hwang, J. H., Park, C. H., Song, C. K., Kim, J. C., 2000, A Study on the Positioning Characteristic of Aerostatic Stage, Proceedings of the Korean Society of Precision Engineering, 668-671.
  7. Chang, H. S., Park, Y. J., Chang, Y. S., Choi, J. B., Kim, Y. J., Chun, P. H., Kong, J. Y., 2006, CFD Analysis for Concept Design of Air Levitation Transport System, Proceedings of the Korean Society of Precision Engineering, 81-82.
  8. Lee, E. K., Kim, N. S., Dai, M. D., Kim, C. W., 2010, FSI Analysis of Air-turn-Bar System in Roll-to-Roll Continues Process, Proceedings of the Korean Society of Precision Engineering, 269-270.

Cited by

  1. Horizontally Moving Piggy-back Loading and Unloading System Capable of Avoiding Catenary Lines vol.30, pp.5, 2016, https://doi.org/10.7735/ksmte.2021.30.5.415