References
- Bhattacharya, A., Das, S., Majumder, P. and Batish, A. (2009), "Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA", Prod. Eng., 3(1), 31-40. https://doi.org/10.1007/s11740-008-0132-2
- Chockalingam, P. and Wee, L.H. (2012), "Surface roughness and tool wear study on milling of AISI 304 stainless steel using different cooling conditions", Int. J. Eng. Tech., 2(8), 1386-1391.
- El-Tamimi, A.M. and El-Hossainy, T.M. (2008), "Investigating the tool life, cutting force components, and surface roughness of AISI 302 stainless steel material under oblique machining", Mater. Manufac. Process., 23(4), 427-438. https://doi.org/10.1080/10426910801974846
- Ghani, J.A., Choudhury, I.A. and Hassan, H.H. (2004), "Application of Taguchi method in the optimization of end milling parameters", J. Mater. Process. Tech., 145(1), 84-92. https://doi.org/10.1016/S0924-0136(03)00865-3
- Gopalsamy, B.M., Mondal, B. and Ghosh, S. (2009), "Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA", Int. J. Adv. Manufac. Tech., 45(11-12), 1068-1086. https://doi.org/10.1007/s00170-009-2054-3
- Groover, M.P. (1990), Fundamentals of modern manufacturing-materials processes and systems, Englewood Cliffs, NJ: Prentice-Hall.
- Kaladhar, M., Subbaiah, K.V. and Rao, C.S. (2013), "Optimization of surface roughness and tool flank wear in turning of AISI 304 austenitic stainless steel with CVD coated tool", J. Eng. Sci. Tech., 8(2), 165-176.
- Kaladhar, M., Subbaiah, K.V., Rao, C.S. and Rao, K.N. (2010), "Optimization of process parameters in turning of AISI 202 austenitic stainless steel", ARPN J. Eng. Appl. Sci., 5(9), 79-87.
- Kosa, T. (1989), Machining of stainless steels handbook, ASM International, 681.
- Nalbant, M., Gökkaya, H. and Sur, G. (2007), "Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning", Mater. Des., 28(4), 1379-1385. https://doi.org/10.1016/j.matdes.2006.01.008
- Peckner, D. and Bernstein, I.M. (1977), Handbook of stainless steels, McGraw-Hill, New York.
- Sait, A.N., Aravindan, S. and Haq, A.N. (2009), "Optimisation of machining parameters of glass-fibre-reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique", Int. J. Adv. Manufac. Tech., 43(5-6), 581-589. https://doi.org/10.1007/s00170-008-1731-y
- Selvaraj, D.P. and Chandramohan, P. (2010), "Optimization of surface roughness of AISI 304 austenitic stainless steel in dry turning operation using Taguchi design method", J. Eng. Sci. Tech., 5(3), 293-301.
- Thangarasu, V.S., Devaraj, G. and Sivasubramanian, R. (2012), "High speed CNC machining of AISI 304 stainless steel; Optimization of process parameters by MOGA", Int. J. Eng. Sci. Tech., 4(3), 66-77.
- Xavior, M.A. and Adithan, M. (2009), "Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel", J. Mater. Process. Tech., 209(2), 900-909. https://doi.org/10.1016/j.jmatprotec.2008.02.068
- Yang, W.P. and Tarng, Y.S. (1998), "Design optimization of cutting parameters for turning operations based on the Taguchi method", J. Mater. Process. Tech., 84(1), 122-129. https://doi.org/10.1016/S0924-0136(98)00079-X