DOI QR코드

DOI QR Code

Developing brittle transparent materials with 3D fractures and experimental study

  • Wang, Jing (Geotechnical and Structural Engineering Research Center, Shandong University) ;
  • Li, Shucai (Geotechnical and Structural Engineering Research Center, Shandong University) ;
  • Zhu, Weishen (Geotechnical and Structural Engineering Research Center, Shandong University) ;
  • Li, Liping (Geotechnical and Structural Engineering Research Center, Shandong University)
  • 투고 : 2015.12.04
  • 심사 : 2016.10.13
  • 발행 : 2016.10.10

초록

The fracture propagation mechanism and fractured rock mass failure mechanism were important research in geotechnical engineering field. Many failures and instability in geotechnical engineering were related on fractures propagation, coalescence and interaction in rock mass under the external force. Most of the current research were limited to two-dimensional for the brittleness and transparency of three-dimensional fracture materials couldn't meet the requirements of the experiment. New materials with good transparent and brittleness were developed by authors. The making method of multi fracture specimens were established and made molds that could be reused. The tension-compression ratio of the material reached above 1/6 in normal temperature. Uniaxial and biaxial loading tests of single and double fracture specimens were carried out. Four new fractures were not found in the experiment of two-dimensional fractures such as the fin shaped crack, wrapping wing crack and petal crack and anti-wing crack. The relationship between stress and strain of the specimens were studied. The specimens with the load had experienced four stages of deformation and the process of the fracture propagation was clearly seen in each stage. The expansion characteristics of the fractured specimens were more obvious than the previous research.

키워드

참고문헌

  1. Beygi, M.H.A. (2013), "The effect of water to cement ratio on fracture parameters and brittleness of selfcompacting concrete", Mater. Des., 50, 267-276. https://doi.org/10.1016/j.matdes.2013.02.018
  2. Cetisli, F. and Kaman, M.O. (2014), "Numerical analysis of interface crack problem in composite plates jointed with composite patch", Steel Compos. Struct., Int. J., 16(2), 203-220. https://doi.org/10.12989/scs.2014.16.2.203
  3. Cheng, Y.F. (2014), "Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches", Mat. Sci. Eng. R, 75, 1-48. https://doi.org/10.1016/j.mser.2013.11.001
  4. Luo, X., Ge, H. and Ohashi, M. (2012), "Experimental study on ductile crack initiation in compact section steel columns", Steel Compos. Struct., Int. J., 13(4), 383-396. https://doi.org/10.12989/scs.2012.13.4.383
  5. Morozov, N. and Petrov, Y. (2013), Dynamics of Fracture, Springer Science & Business Media, New York, NY, USA.
  6. Mostafavi, M. (2013), "Three-dimensional crack observation, quantification and simulation in a quasi-brittle material", Acta Mater., 61(16), 6276-6289. https://doi.org/10.1016/j.actamat.2013.07.011
  7. Ramamurthy, T. (2001), "Shear strength response of some geological materials in triaxial compression", Int. J. Rock Mach. Min. Sci., 38(5), 683-697. https://doi.org/10.1016/S1365-1609(01)00035-1
  8. Sahouryeh, E., Dyskin, A.V. and Germanovich, L.N. (2002), "Crack growth under biaxial compression", Eng. Fract. Mech., 69(18), 2187-2198. https://doi.org/10.1016/S0013-7944(02)00015-2
  9. Scholtes, L.U.C. and Donze, F.V. (2012), "Modelling progressive failure in fractured rock masses using a 3D discrete element method", Int. J. Rock Mech. Min., 52, 18-30. https://doi.org/10.1016/j.ijrmms.2012.02.009
  10. Tang, H.D. (2015), "Mechanical behavior of 3d crack growth in transparent rock-like material containing preexisting flaws under compression", Adv. Mater. Sci. Eng., 1-10.
  11. Tang, C.A., Liang, Z.Z., Zhang, Y.B. and Xu, T. (2005), "Three-dimensional material failure process analysis", Key Eng. Mater., 300(1), 1196-1201.
  12. Wang, J., Li, S.C., Li, L.P., Zhu, W., Zhang, Q.Q. and Song, S.G. (2014), "Study on anchorage effect on fractured rock", Steel Compos. Struct., Int. J., 17(6), 791-801. https://doi.org/10.12989/scs.2014.17.6.791
  13. Zhang, Q.B. and Zhao, J. (2013), "Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads", Int. J. Rock Mech. Min., 60, 423-439.

피인용 문헌

  1. Study of the Crack Propagation Model Under Seepage–Stress Coupling Based on XFEM vol.35, pp.5, 2017, https://doi.org/10.1007/s10706-017-0257-1