Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

A Numerical Analysis for Blast Pressure and Impulse from Free-Air Burst

자유공중폭발에 의한 폭발압력과 충격량에 대한 수치해석

  • Shin, Jinwon (Dept. of Architectural Engineering, Dankook University) ;
  • Lee, Kyungkoo (Dept. of Architectural Engineering, Dankook University)
  • Received : 2016.03.31
  • Accepted : 2016.07.13
  • Published : 2016.08.27
Download PDF
⟨ Previous Next ⟩

Abstract

The need to accurate quantification of blast pressure loading in the near field is important because the focus of security design of critical infrastructure, buildings and bridges is for near-field detonations. Incident and reflected pressures for near-field detonations are very difficult to be measured by commercially available pressure transducers due to the high pressure and temperature, which requires a verified and validated computational fluid dynamics code to reasonably predict the near-field pressures and impulses. This paper presents numerical studies to verify and validate a CFD code for calculations of incident and reflected overpressures and impulses. The near field is emphasized and recommendations for mesh sizes to optimally simulate the near-field detonation are provided.

근접거리에서의 폭발하중의 정확한 정량화에 대한 요구는 주요기반시설물, 빌딩 및 교량의 안전설계가 근접폭발에 대한 것이라는 점에서 매우 중요하다. 근접폭발에 대한 입사 및 반사압력은 높은 압력과 온도로 인하여 사용가능한 압력변환기로는 직접적인 측정이 매우 힘들며, 이는 근접거리에서의 압력과 충격량에 대한 합당한 예측을 가능하게 하는 확인되고 검증된 전산유체역학코드를 필요로 한다. 본 논문은 입사 및 반사 초과압력 및 충격량의 산정에 대하여 CFD 코드를 확인하고 증명하기 위한 수치해석에 대하여 소개하였다. 연구는 근접거리에 초점을 맞추어 수행되었으며, 근접폭발 시뮬레이션을 최적화하는 메쉬크기에 대에 대해서도 제안하였다.

Keywords

References

  1. DoD (2013) Unified Facilities Criteria (UFC): Design of Buildings to Resist Progressive Collapse (UFC 4-023-03). Departments of Defense, Washington, DC.
  2. 이경구, 이문창(2015) 강재압축재의 방폭성능에 대한 중력하중효과의 해석적 연구, 한국강구조학회논문집, 한국강구조학회, 제27권, 제3호, pp.273-280. Lee, K. and Lee, M. (2015) Analytical Study on Effects of Gravity Load on Blast Resistance of Steel Compressive Members, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.3, pp.273-280.
  3. Kingery, C.N. and Bulmash, G. (1984) Airblast Parameters From TNT Spherical air Burst and Hemispherical Surface Burst. Report ARBRL-TR-02555, US Army Ballastic Research Laboratory, Aberdeen Proving Ground, MD.
  4. Needham, C.E. (2010) Blast Waves. Springer, NY.
  5. Shin, J., Whittaker, A.S., Aref, A.J., and Cormie, D. (2014) "Air Blast Effects on Civil Structures." Technical Report MCEER 14-0006, University at Buffalo, Buffalo, New York, December.
  6. Sherkar, P., Whittaker, A.S., and Aref, A.J. (2010). "Modeling the Effects of Detonations of High Explosives to Inform Blast-Resistant Design." Technical Report MCEER-10-0009, The State University of New York at Buffalo, Buffalo, NY.
  7. ANSYS (2013) AUTODYN User's Manual Version 15.0. ANSYS, Inc., Canonsburg, PA.
  8. ASME (2006) Guide for Verification and Validation in Computational Solid Mechanics. ASME V & V 10-2006, American Society of Mechanical Engineers, New York, NY.
  9. Goodman, H.J. (1960) Complied Free-Air Blast Data on Bare Spherical Pentolite. BRL Report No. 1092, US Army Ballistic Research Laboratory, Aberdeen Proving Ground, MD.
  10. Huffington, Jr., N.J. and Ewing, W.O. (1985). Reflected Impulse Near Spherical Charges. Technical Report BRLTR- 2678, US Army Ballistic Research Laboratory, Aberdeen Proving Ground, MD.
  11. Frost, D.L., Cairns, M., Goroshin, S., Leadbetter, J., Ripley, R., and Zhang, F. (2008) Reflected Heterogeneous Blast. Proceedings, 20th International Symposium on Military Aspects of Blast and Shock, Oslo, Norway.
  12. McNesby, K.L., Homan, B.E., Ritter, J.J., Quine, Z., Ehlers, R.Z., and McAndrew, B.A. (2010) Afterburn Ignition Delay and Shock Augmentation in Fuel Rich Solid Explosives. Propellants, Explosives, Pyrotechnics, Vol.35, No.1, pp. 57-65.
  13. Dobratz, B.M. and Crawford, P.C. (1985) LLNL Explosive Handbook, Properties of Chemical Explosives and Explosive Simulants. Report UCRL-52997, Lawrence Livermore National Laboratory, Livermore, CA.
  14. 김나은, 이철호, 김성용(2015) 고진동수 계단의 진동응답산정을 위한 등가임펄스 산정식 제안, 한국강구조학회논문집, 한국강구조학회, 제27권, 제2호, pp.181-193. Kim, N., Lee, C., and Kim, S. (2015) Formula for Equivalent Impulsive Force to Predict Vibrational Response of High-Frequency Staircases, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.2, pp.181-193.
  15. Browning, R., Cormie, D., Shin, J., and Whittaker, A.S. (2014) "Computational Fluid Dynamics Predictions of Blast Loads." Proceedings, Structures Congress 2014-ASCE. Boston, MA, April.
  16. LSTC (2013) LS-DYNA Keyword User's Manual Ver. R7.0. Livermore Software Technology Corporation, Livermore, CA.
  17. 김규동, 노명현, 이재익, 이상열(2016) 고속 변형률 속도를 고려한 폭발하중을 받는 보강형 방폭벽 구조의 동적 특성, 한국강구조학회논문집, 한국강구조학회, 제28권, 제2호, pp.65-74. Kim, G., Noh, M., Lee, J., and Lee, S. (2016) Dynamic Characteristics Stiffened Blast-Wall Strucures Subjected to Blast Loading Considering High Strain-Rate Effects, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.2, pp.65-74.
  18. McGlaun, J.M., Thompson, S.L., and Elrick, M.G. (1990) CTH: A Three-Dimensional Shock wave Physics Code. International Journal of Impact Engineering, Vol.10, No.1-4, pp.351-360. https://doi.org/10.1016/0734-743X(90)90071-3
  19. Hyde, D.W. (1992) ConWep: Conventional Weapons Effects (Application of TM 5-855-1). US Army Corps of Enigneers, Waterways Experiment Station, Vicksburg, MS.
  20. Smith, P.D. and Hetherington, J.G. (1994) Blast and Ballistic Loading of Structures. Butterworth-Heinemann, Oxford; Boston.
  21. Dusenberry, D.O. (2010) ed. Handbook for Blast-Resistant Design of Buildings. Wiley, Hoboken, NJ.