References
- K. H. Lee, T. K. Kim, and T. Y. Na, "The Status of Domestic Investment Casting Industry (in Korean)," J. Kor. Found. Soc., 12 [2] 125-30 (1992).
- Y. G. Im, S. I Chung, and H. D. Jeong, "Development of Investment Casting Technique using R/P Master Model (in Korean)," Korean Soc. Precis Eng., 16 [6] 52-7 (1999).
- Y. A. Meng and B. G. Thomas, "Modeling Transient Slaglayer Phenomena in The Shell/Mold Gap in Continuous Casting of Steel," Metall. Mater. Trans. B, 34 [B] 707-25 (2003).
- M. Simsir, L. C. Kumruoglu, and A. Ozer, "An Investigation into Stainless-Steel/ Structure-Alloy-Steel Bimetal Produced by Shell Mould Casting," Mater. Des., 30 264-70 (2009). https://doi.org/10.1016/j.matdes.2008.04.074
- S. K. Kim and M. K. Kim, "A Study on the Precision Casting Method of Urea (in Korean)," Korean Soc. Manuf. Process. Eng., 3 205-10 (2004).
- B. W. Kim, "Blowholes, Pinholes, Slag Inclusion, Chiled Edges (in Korean)," J. Kor. Found. Soc., 9 [6] 446-53 (1989).
- R. Rajkolhe and J. G. Khan, "Defects, Cause and Their Remedies in Casting Process: A Review," Int. J. Res., 2 [3] 375-83 (2014).
- S. Koroyasu, "Effect of Coat on Cooling Capacity of Mold in Evaporative Pattern Casting Process (in Korean)," J. Kor. Found. Soc., 25 [5] 190-94 (2005).
- E. H. Kim, W. R. Lee, Y. G. Jung, and C. S. Lee, "A New Binder System for Preparing High Strength Inorganic Molds in Precision Casting," Mater. Chem. Phys., 126 344-51 (2011). https://doi.org/10.1016/j.matchemphys.2010.11.015
- E. H. Kim, G. H. Jo, J. H. Lee, Y. G. Jung, J. H. Ha, and U. G. Paik, "Powder Preparation for a Shell Mold Using a New Coating Process," Ceram. Int., 38 2749-55 (2012). https://doi.org/10.1016/j.ceramint.2011.11.044
- E. H. Kim, J. H. Lee, Y. G. Jung, C. S. Lee, and Y. G. Paik, "A New in Situ Process in Precision Casting for Mold Fabrication." J. Eur. Ceram. Soc., 31 1581-88 (2011). https://doi.org/10.1016/j.jeurceramsoc.2011.03.013
- G. H. Cho, J. Li, E. H. Kim, and Y. G. Jung, "Preparation of a Ceramic Core with High Strength using an Inorganic Precursor and the Gel-Casting Method," Surf. Coat. Technol., 284 396-99 (2015). https://doi.org/10.1016/j.surfcoat.2015.09.062
- S. W. Lye, H. S. Aw, and S. G. Lee. "Adhesives for Bead Fusion of Recycled Expandable Polystyrene," J. Appl. Polym. Sci., 86 [2] 456-62 (2002). https://doi.org/10.1002/app.11004
- N. Sasaki, "A Revolutionary Inorganic Core and Mold Making Process," Foundry Manage. Technol., 137 [2] 21-5 (2009).
- P. G. Shewmon, Diffusion in Solids; Vol. 1, pp. 62-6, McGraw-Hill, New York, 1963.
Cited by
- Effect of P/Al Molar Ratio and Curing Conditions of CBAPC Binder on Flexural Strength and Moisture Resistance of Artificial Sand Core vol.57, pp.12, 2016, https://doi.org/10.3365/kjmm.2019.57.12.808