DOI QR코드

DOI QR Code

2014년 JCOMM 해수 염분 측정 국제 상호비교실험 결과 보고

Summary of 2014 JCOMM Pilot Inter-Comparison Project for Seawater Salinity Measurements

  • 이정한 (한국해양과학기술원 해양방위연구센터) ;
  • 김은수 (한국해양과학기술원 환경기반연구센터) ;
  • 이용국 (한국해양과학기술원 안전.방위연구본부)
  • 투고 : 2015.04.30
  • 심사 : 2016.07.25
  • 발행 : 2016.09.30

초록

The inter-comparison project for seawater salinity measurements, in which 25 laboratories from 16 countries took part, was conducted by JCOMM (Joint WMO/IOC Technical Commission for Oceanography and Marine Meteorology) for the first time in 2014. Two seawater samples of different salinity values ranging from 30-35 and 20-25 for Sample A and Sample B respectively and which had sufficient homogeneity and stability were distributed to all participants. Participants measured the salinity in their own laboratories at least 3 times and reported the results. Statistical treatments were applied to the results to assess discrepancies among laboratories. 20 out of the 25 laboratories used laboratory salinometers and statistics for this group were denoted as belonging to group ${\alpha}$; while 5 out of the 25 laboratories used hand-held measuring instruments and statistics for this group were denoted as belonging to group ${\beta}$. Bias described as discrepancy among laboratories in group ${\alpha}$ was within ${\pm}0.001$ and expanded uncertainty (k = 2) was in the vicinity of 0.002. The bias and the uncertainty of Korea Institute of Ocean Science and Technology (KIOST), in group ${\alpha}$, were 0.000 and 0.002, respectively. The biases of group ${\beta}$ were greater than group ${\alpha}$ because of constraints related to instrument accuracy. Biases from 3 laboratories in group ${\beta}$ exceed the accuracy specification of the corresponding instruments. Considering that the uncertainty of Standard Seawater (SSW) is of the order 0.001 to 0.002, the inter-comparison results show that 16 laboratories among the 25 laboratories made high quality measurements, largely indistinguishable from one another.

키워드

참고문헌

  1. 김성대, 최상화, 박준용, 박수영 (2015) 연구사업 해양자료 관리를 위한 표준화와 해양물리자료 표준(안). Ocean Polar Res 37(4):249-263(Kim SD, Choi, SH, Park JY, Park SY (2015) Data standardization for research ocean-data management and standard proposal of physical oceanographic data. Ocean Polar Res 37(4):249-263) https://doi.org/10.4217/OPR.2015.37.4.249
  2. 노태근, 강동진, 김은수, 강성현, 조성록, 이정무, 박은주, 문초롱 (2015) 자연해수를 이용한 해수 중 영양염 분석용 표준물질 개발. 한국해양학회지:바다 20(1):29-35(Rho T, Kang DJ, Kim ES, Kahng SH, Cho SR, LEE JM, Park EJ, Moon CR (2015) Development of reference material using natural seawater for nutrient analysis in seawater. J Kor Soc Ocean: The Sea 20(1):29-35) https://doi.org/10.7850/jkso.2015.20.1.29
  3. 문초롱, 노태근, 강동진, 강성현, 조성록, 김은수, 이정무, 박은주, 신진선 (2015) 2010년 국내 해수 중 영양염 분석 실험실간 상호비교실험 연구. 한국해양학회지:바다 20(1):63-70(Moon CR, Rho T, Kang DJ, Kahng SH, Cho SR, Kim ES, Lee JM, Park EJ, Shin JS (2015) 2010 Inter-laboratory comparison study on nutrient analysis in seawater. J Kor Soc Ocean: The Sea 20(1):63-70) https://doi.org/10.7850/jkso.2015.20.1.63
  4. 이정한, 황근춘, 김은수, 이승훈 (2014) CTD 교정 시스템 구축 및 불확도 평가. Ocean Polar Res 36(1):77-85 (Lee JH, Hwang KC, Kim ES, Lee SH (2014) Establishmentof CTD calibration system and uncertainty estimation. Ocean Polar Res 36(1):77-85) https://doi.org/10.4217/OPR.2014.36.1.077
  5. 주현희, 박성욱, 김은수, 이정한 (2013) 중국 해양표준화 "12.5" 발전계획. 한국해양과학기술원, 범신사, 73 p(Ju HH, Park SW, Kim ES, Lee JH (2013) China Marine standardization "12.5" development plan. KIOST, BUMSINSA, 73 p)
  6. Bacon S, Culkin F, Higgs N, Ridout P (2007) IAPSO standard seawater: definition of the uncertainty in the calibration procedure and stability of recent batches. J Atmos Ocean Tech 24(10):1785-1799 https://doi.org/10.1175/JTECH2081.1
  7. BIPM (2008a) Evaluation of measurement data-guide to the expression of uncertainty in measurement GUM 1995 with minor corrections. JCGM 100:2008, 134 p
  8. BIPM (2008b) Evaluation of measurement data-supplement 1 to the guide to the expression of uncertainty in measurement-propagation of distributions using a Monte Carlo method. JCGM 101:2008, 90 p
  9. Culkin F, Ridout PS (1998) Stability of IAPSO standard seawater. J Atmos Ocean Tech 15(4):1072-1075 https://doi.org/10.1175/1520-0426(1998)015<1072:SOISS>2.0.CO;2
  10. Dux JP (1990) Handbook of quality assurance for the analytical chemistry laboratory. Van Nostrand Reinhold, New York, 203 p
  11. ISO (1994) Accuracy (trueness and precision) of measurement methods and results-Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method. ISO 5725-2:1994, 42 p
  12. ISO (2005) Statistical methods for use in proficiency testing by interlaboratory comparisons. ISO NF 13528:2005, 66 p
  13. ISO (2006) Reference materials-general and statistical principles for certification. ISO 35:2006, 64 p
  14. Lewis EL (1980) The practical salinity scale 1978 and its antecedents. IEEE J Oceanic Eng 5(1):3-8 https://doi.org/10.1109/JOE.1980.1145448
  15. Le Menn M (2011) About uncertainties in practical salinity calculations. Ocean Sci 7(5):651-659 https://doi.org/10.5194/os-7-651-2011
  16. Perkin RG, Lewis EL (1980) The practical salinity scale 1978: fitting the data. IEEE J Oceanic Eng 5(1):9-16 https://doi.org/10.1109/JOE.1980.1145441
  17. Taylor JK (1987) Quality assurance of chemical measurements. Lewis Publishers, Chelsea, 328 p