한국재난정보학회 논문집 (Journal of the Society of Disaster Information)

  • 제12권3호
  • /
  • Pages.286-291
  • /
  • 2016
  • /
  • 1976-2208(pISSN)
  • /
  • 2671-5287(eISSN)
한국재난정보학회 (The Korean Society of Disaster Information)
권호 표지
DOI QR코드

DOI QR Code

바인더 종류에 따른 무기단열재의 열전도 특성에 관한 연구

A Study on the Thermal Conductivity of Inorganic Insulation Properties According to the Binder Types

  • Jeon, Chanki (Department of Urban Construction Engineering, Incheon National University) ;
  • Lee, Jaeseong (Urban Construction Engineering, Incheon National University) ;
  • Chung, Hoon (Chemistry Engineering, SunHan M&T) ;
  • Park, Jongpil (Urban Construction Engineering, Incheon National University) ;
  • Shim, Jaeyeong (Urban Construction Engineering, Incheon National University)
  • 투고 : 2016.09.14
  • 심사 : 2016.09.27
  • 발행 : 2016.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 불연성 무기단열재를 제조하기 위해 바인더 종류를 대체하여 열전도율을 충족시키고 경량 무기단열재 개발을 위해 연구하였다. 열전도율 측정은 열전도 측정기인 HFM-436을 이용하여 열전도율을 측정하였다. 무기단열재를 바인더 SH-1(액체), SH-2(고체)와 펄라이트를 배합하여 단열재 샘플1을 만들었고, SH-3(액체)와 펄라이트를 배합하여 단열재 샘플 2를 제조했다. 총 4개의 샘플을 제조했다. 각각 바인더와 펄라이트를 틀에 넣어 성형하였으며 완전건조 후 HFM-435을 이용하여 열전도율을 측정하였다. 두 가지 다른 바인더를 사용하여 열전도율을 측정하였고 바인더에 따른 열전도율의 영향을 분석하였다.

In this study, we conducted about the manufacture of a non-combustible inorganic insulation by replacing the binder type for satisfaction of thermal conductivity for developing a lightweight inorganic insulation. Thermal conductivity was measured using a machine of HFM-436. We made samples are inorganic insulation by using SH-1(liquid) of S company and SH-2(solids). By Mixing Pearlite and SH-4(Liquid) was produced as insulation sample 2. Each was shaped into a binder and pearlite in the frame. After complete drying, thermal conductivity was measured by using HFM-435. The thermal conductivity was determined using two different binder. We analyzed the effect on thermal conductivity in binder.

키워드

참고문헌

  1. Korea Energy Agency (2014), Ministry of Trade, Industry and Energy, Energy Statistics Handbook
  2. Kwon, Y. C. (2012), "A Study on the Application of Aerogel as an Insulation to Apartment Buildings" Journal of Architectural Science Conference, Article 8, No.1 3 p.559
  3. Song, J. Y et al. (2011), "A Study on the Combustion Characteristic of Building Materials", Journal of the 24 KOSOS, Vol. 26, No. 3 pp.23-28
  4. Lee, H. P., Park, Y. J. (2011), "A Study on Combustion Gas Toxicity of Architecture Surface Material", Proceedings of the Korea Institute of Fire Science and Engineering Conference, 2011. 4, pp. 441-446
  5. Yeo, I. D, (2009), "Manufacturing of Lightweight Aggregate Concrete Using Perlite and Its VOCs Removal Characteristic", Gyemyeong University, Master Grade Treatise
  6. Kim, D. B., Jun, K. B. (2014), "An Experimental Study on the Properties Blended with Industrial by Products Using Mineral Admixture", Journal of Korea Society of Disaster Information, Vol. 10, No.2 pp. 238-243 https://doi.org/10.15683/kosd.2014.10.2.238
  7. Chung, H., Jeon, C. K., Jeon, S. Y., Jung, H. Y., Kim, J. H. (2014), "A Study on Insulation Characteristic of Glass Wool Coated with a Moisture-Preventing Agent", Proceeding of 2014 Korea Society Disaster Information Conference, KOSDI, pp. 391-393
  8. Park, J. P., Jeon, C. K., Kim, J. H., Lee, J. S., Shim, J. Y. (2015), "A Study on Thermal Conductivity of Inorganic Insulation Using Pearlite", Proceeding of 2015 Korea Society Disaster Information Conference, KOSDI, pp. 138-140