DOI QR코드

DOI QR Code

Seismic response of 3D steel buildings with hybrid connections: PRC and FRC

  • Reyes-Salazar, Alfredo (Facultad de Ingenieria, Universidad Autonoma de Sinaloa, Ciudad Universitaria) ;
  • Cervantes-Lugo, Jesus Alberto (Facultad de Ingenieria, Universidad Autonoma de Sinaloa, Ciudad Universitaria) ;
  • Barraza, Arturo Lopez (Facultad de Ingenieria, Universidad Autonoma de Sinaloa, Ciudad Universitaria) ;
  • Bojorquez, Eden (Facultad de Ingenieria, Universidad Autonoma de Sinaloa, Ciudad Universitaria) ;
  • Bojorquez, Juan (Facultad de Ingenieria, Universidad Autonoma de Sinaloa, Ciudad Universitaria)
  • 투고 : 2016.07.07
  • 심사 : 2016.09.22
  • 발행 : 2016.09.20

초록

The nonlinear seismic responses of steel buildings with perimeter moment resisting frames (PMRF) and interior gravity frames (IGF) are estimated, modeling the interior connections first as perfectly pinned (PPC), and then as partially restrained (PRC). Two 3D steel building models, twenty strong motions and three levels of the PRC rigidity, which are represented by the Richard Model and the Beam Line Theory, are considered. The RUAUMOKO Computer Program is used for the required time history nonlinear dynamic analysis. The responses can be significantly reduced when interior connections are considered as PRC, confirming what observed in experimental investigations. The reduction significantly varies with the strong motion, story, model, structural deformation, response parameter, and location of the structural element. The reduction is larger for global than for local response parameters; average reductions larger than 30% are observed for shears and displacements while they are about 20% for bending moments. The reduction is much larger for medium- than for low-rise buildings indicating a considerable influence of the structural complexity. It can be concluded that, the effect of the dissipated energy at PRC should not be neglected. Even for connections with relative small stiffness, which are usually idealized as PPC, the reduction can be significant. Thus, PRC can be used at IGF of steel buildings with PMRF to get more economical construction, to reduce the seismic response and to make steel building more seismic load tolerant. Much more research is needed to consider other aspects of the problem to reach more general conclusions.

키워드

과제정보

연구 과제 주관 기관 : La Universidad Autonoma de Sinaloa (UAS)

참고문헌

  1. Bjorhovde, R., Colson, A. and Brozzetti, J. (1990), "Classification system for beam-to-column connections", J. Struct. Eng. ASCE, 116(11), 3059-3076. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3059)
  2. Black, E.F. (2012), "Inelastic parameter estimates for regular steel moment-resisting frame", Eng. Struct., 34, 33-39. https://doi.org/10.1016/j.engstruct.2011.09.011
  3. BOCA (1993), (12th Edition), Building Officials & Code Administration International Inc, National Building Code.
  4. Bojorquez, E., Reyes-Salazar, A., Teran-Gilmore, A. and Ruiz, S.E. (2010), "Energy-based damage index for steel structures", Steel Compos. Struct., Int. J., 4(10), 331-348.
  5. Carr, A. (2011) "RUAUMOKO, Inelastic dynamic analysis program", Ph.D. Dissertation; University of Cantenbury, Cantenbury, England.
  6. Chang, H.Y., Jay Lin, C.C., Lin, K.C. and Chen, J.Y. (2009), "Role of accidental torsion in seismic reliability assessment for steel buildings", Steel Compos. Struct., Int. J., 9(5), 457-471. https://doi.org/10.12989/scs.2009.9.5.457
  7. Colson, A. (1991), "Theoretical modeling of semi-rigid connections behavior", J. Construct. Steel Res., 19(3), 213-224. https://doi.org/10.1016/0143-974X(91)90045-3
  8. Disque, R.O. (1964), "Wind connections with simple framing", Eng. J., AISC 1964, 1(3), 101-103.
  9. Elnashai, A.S. and Elgazhouli, A.Y. (1994), "Seismic behavior of semi-rigid steel frames", J. Construct. Steel Res., 29(1-3), 149-174. https://doi.org/10.1016/0143-974X(94)90060-4
  10. Elnashai, A.S., Elgazhouli, A.Y. and Denesh Ashtiani, F.A. (1998), "Response of semi-rigid steel frames to cyclic and earthquake loads", J. Struct. Eng. ASCE, 194(8), 857-867.
  11. El-Salti, M.K. (1992), "Design of frames with partially restrained connections", Ph.D. Dissertation; University of Arizona, Tucson, AZ, USA.
  12. FEMA (2000), State of the Art Report on Systems Performance of Steel Moment Frames Subjected to Earthquake Ground Shaking; SAC Steel Project, Report FEMA 355C, Federal Emergency Management Agency.
  13. Garcia, R., Sullivan, T.J. and Della Corte, G. (2010), "Development of a displacement-based design method for steel frame-RC wall building", J. Earthq. Eng., 14(2), 252-277. https://doi.org/10.1080/13632460902995138
  14. Gholipour, F.M., Mojtahedi, A. and Nourani, V. (2015), "Effect of semi-rigid connections in improvement of seismic performance of steel moment-resisting frames", Steel Compos. Struct., Int. J., 19(2), 467-484. https://doi.org/10.12989/scs.2015.19.2.467
  15. Kishi, N., Chen, W.F., Goto, Y. and Hasan, R. (1996), "Behavior of tall buildings with mixed use of rigid and semi-rigid connections", Comput. Struct., 61(6), 1193-1206. https://doi.org/10.1016/0045-7949(96)00052-1
  16. Kishi, N., Chen, W.F., Goto, Y. and Matsuoka, K.G. (2003), "Design aid of semi-rigid connections for frame analysis", Eng. J., AISC, 30(3), 90-107.
  17. Krishnan, S., Ji, C., Komatitsch, D. and Tromp, J. (2006), "Performance of two 18-storey steel momentframe building in Southern California during two large simulated San Andres Earthquakes", Earthq. Spectra, 22(4), 1035-1061. https://doi.org/10.1193/1.2360698
  18. Leon, R.T. and Shin, K.J. (1995), "Performance of semi-rigid frames", Am. Beyond, 1020-1035.
  19. Lee, K. and Foutch, D.A. (2006), "Seismic evaluation of steel moment frames buildings designed using different R-values", J. Struct. Eng. Div., ASCE, 132(9), 1461-1472. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1461)
  20. Liao, K.W., Wen, Y.K. and Foutch, D.A. (2007), "Evaluation of 3D steel moment frames under earthquake excitations. I: modeling", J. Struct. Eng., ASCE, 133(3), 462-470. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(462)
  21. Liu, J. and Astaneh-Asl, A. (2000), "Cyclic tests on simple connections including effects of the slab", Report SAC/BD-00/03; SAC Joint Venture.
  22. Lopez-Barraza, A., Ruiz, S.E., Reyes-Salazar, A. and Bojorquez, E. (2016), "Demands and distribution of hysteretic energy in moment resistant self-centering steel frames", Steel Compos. Struct., Int. J., 20(5), 1155-1171. https://doi.org/10.12989/scs.2016.20.5.1155
  23. Nader, M.N. and Astaneh-Asl, A. (1991), "Dynamic behavior of flexible, semi-rigid and rigid frames", J. Construct. Steel Res., 18(3), 179-192. https://doi.org/10.1016/0143-974X(91)90024-U
  24. Nguyen, P.C. and Kim, S.E. (2013), "Nonlinear elastic dynamic analysis of space steel frames with semirigid connections", J. Construct. Steel Res., 84, 72-81. https://doi.org/10.1016/j.jcsr.2013.02.004
  25. Nguyen, P.C. and Kim, S.E. (2014), "Nonlinear inelastic time-history analysis of three-dimensional semirigid steel frames", J. Construct. Steel Res., 101, 192-206. https://doi.org/10.1016/j.jcsr.2014.05.009
  26. Nguyen, P.C. and Kim, S.E. (2015), "Second-order spread-of-plasticity approach for nonlinear time-history analysis of space semi-rigid steel frames", Finite Elem. Anal. Des., 105, 1-15. https://doi.org/10.1016/j.finel.2015.06.006
  27. Reyes-Salazar A. (2002), "Ductility and ductility reduction factors", Struct. Eng. Mech., Int. J., 13(4), 369-385. https://doi.org/10.12989/sem.2002.13.4.369
  28. Reyes-Salazar, A. and Haldar, A. (1999), "Nonlinear seismic response of steel structures with semi-rigid and composite connections", J. Construct. Steel Res., 51(1), 37-59. https://doi.org/10.1016/S0143-974X(99)00005-X
  29. Reyes-Salazar, A. and Haldar, A. (2000), "Dissipation of energy in steel frames with PR connections", Struct. Eng. Mech., Int. J., 9(3), 241-256. https://doi.org/10.12989/sem.2000.9.3.241
  30. Reyes-Salazar, A. and Haldar, A. (2001a), "Energy dissipation at PR frames under seismic loading", J. Struct. Eng. ASCE, 127(5), 588-593. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:5(588)
  31. Reyes-Salazar, A. and Haldar, A. (2001b), "Seismic response and energy dissipation in partially restrained and fully restrained steel frames: An analytical study", Steel Compos. Struct., Int. J., 1(4), 459-480. https://doi.org/10.12989/scs.2001.1.4.459
  32. Reyes-Salazar, A., Bojorquez, E., Velazquez-Dimas, J.I., Lopez-Barraza, A. and Rivera-Salas, J.L. (2015), "Ductility and ductility reduction factors for steel buildings considering different structural representations", Bull. Earthq. Eng., 13(6), 1749-1771. https://doi.org/10.1007/s10518-014-9676-z
  33. Rafiee, A., Talatahari, S. and Hadidi, A. (2013), "Optimum design of steel frames with semi-rigid connections using big bang-Big crunch method", Steel Compos. Struct., Int. J., 14(5), 431-451. https://doi.org/10.12989/scs.2013.14.5.431
  34. Richard, R.M. and Abbott, B.J. (1975), "Versatile elastic plastic stress-strain formula", ASCE J. Eng. Mech., 101(4), 511-515.
  35. Richard R.M., PRCONN (1993), "Moment-rotation curves for partially restrained connections", RMR Design Group, Tucson, AZ, USA.
  36. Ricles, J.M., Sause, R., Garlock, M. and Zhao, C. (2001), "Post-tensioned seismic-resistant connections for steel frames", J. Struct. Eng. ASCE, 127(2), 113-121. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(113)
  37. Sagiroglu, M. and Aydin, A.C. (2015), "Design and analysis of non-linear space frames with Semi-rigid connections", Steel Compos. Struct., Int. J., 18(6), 1405-1421. https://doi.org/10.12989/scs.2015.18.6.1405
  38. Shen, J. and Astaneh-Asl, A. (1999), "Hysteretic behavior of bolted angle connections", J. Construct. Steel Res., 51(3), 201-218. https://doi.org/10.1016/S0143-974X(99)00030-9
  39. Shen, J. and Astaneh-Asl, A. (2000), "Hysteretic model of bolted-angle connections", J. Construct. Steel Res., 54(3), 317-343. https://doi.org/10.1016/S0143-974X(99)00070-X
  40. UBC (1997), Structural Engineering Design Provisions; International Conference of Building Officials.
  41. Valipour, H.R. and Bradford, M.A. (2013), "Nonlinear P-${\Delta}$ analysis of steel frames with semi-rigid connections", Steel Compos. Struct., Int. J., 14(1), 1-20. https://doi.org/10.12989/scs.2013.14.1.001
  42. Yang, J.G. and Jeon, S.S. (2009), "Analytical model for the initial stiffness and plastic moment capacity of an unstiffened top and seat connection under a shear load", Int. J. Steel Struct., 9(3), 195-205. https://doi.org/10.1007/BF03249494

피인용 문헌

  1. Ductility demands and reduction factors for 3D steel structures with pinned and semi-rigid connections vol.16, pp.4, 2016, https://doi.org/10.12989/eas.2019.16.4.469
  2. Seismic analysis of high-rise steel frame building considering irregularities in plan and elevation vol.39, pp.1, 2016, https://doi.org/10.12989/scs.2021.39.1.065