DOI QR코드

DOI QR Code

Mitigation of Ammonia Dispersion with Mesh Barrier under Various Atmospheric Stability Conditions

  • Gerdroodbary, M. Barzegar (Department of Mechanical Engineering, Babol University of Technology) ;
  • Mokhtari, Mojtaba (Department of Chemical and Petroleum Engineering, Sharif University of Technology) ;
  • Bishehsari, Shervin (Department of Mechanical Engineering, Central Tehran Branch, Islamic Azad University) ;
  • Fallah, Keivan (Department of Mechanical Engineering, Sari Branch, Islamic Azad University)
  • Received : 2016.02.23
  • Accepted : 2016.07.04
  • Published : 2016.09.30

Abstract

In this study, the effects of the mesh barrier on the free dispersion of ammonia were numerically investigated under different atmospheric conditions. This study presents the detail and flow feature of the dispersion of ammonia through the mesh barrier on various free stream conditions to decline and limit the toxic danger of the ammonia. It is assumed that the dispersion of the ammonia occurred through the leakage in the pipeline. Parametric studies were conducted on the performance of the mesh barrier by using the Reynolds-averaged Navier-Stokes equations with realizable k-${\varepsilon}$ turbulence model. Numerical simulations of ammonia dispersion in the presence of mesh barrier revealed significant results in a fully turbulent free stream condition. The results clearly show that the flow behavior was found to be a direct result of mesh size and ammonia dispersion is highly influenced by these changes in flow patterns in downstream. In fact, the flow regime becomes laminar as flow passes through mesh barrier. According to the results, the mesh barrier decreased the maximum concentration of the ammonia gas and limited the risk zone (more than 500 ppm) lower than 2 m height. Furthermore, a significant reduction occurs in the slope of the upper boundary of $NH_3$ risk zone distribution at downstream when a mesh barrier is presented. Thus, this device highly restricts the leak distribution of ammonia in the industrial plan.

Keywords

References

  1. Amini, Y., Mokhtari, M., Haghshenasfard, M., Gerdroodbary, M.B. (2015) Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique. Case Studies in Thermal Engineering 6, 104-115. https://doi.org/10.1016/j.csite.2015.08.001
  2. Barzegar Gerdroodbary, M., Bishesari, Sh., Hosseinalipour, S.M., Sedighi, K. (2012) Transient Analysis of Counterflowing Jet over Highly Blunt Cone in Hypersonic Flow. Acta Astronautica 73, 38-48. https://doi.org/10.1016/j.actaastro.2011.12.011
  3. Barzegar Gerdroodbary, M., Fayazbakhsh, M.A. (2011) Numerical Study on Heat Reduction of Various Counterflowing Jets over Highly Blunt Cone in Hypersonic. International Journal of Hypersonics 2, 1-13. https://doi.org/10.1260/1759-3107.2.1.1
  4. Barzegar Gerdroodbary, M., Ganji, D.D., Amini, Y. (2015) Numerical study of shock wave interaction on transverse jets through multiport injector arrays in supersonic crossflow. Acta Astronautica 115, 422-433. https://doi.org/10.1016/j.actaastro.2015.06.002
  5. Barzegar Gerdroodbary, M., Hosseinalipour, S.M. (2010) Numerical simulation of hypersonic flow over highly blunted cones with spike. Acta Astronautica 67, 180-193. https://doi.org/10.1016/j.actaastro.2010.01.026
  6. Barzegar Gerdroodbary, M., Imani, M., Ganji, D.D. (2014) Heat reduction using conterflowing jet for a nose cone with Aerodisk in hypersonic Flow. Aerospaces Sciences and Technology 39, 652-665. https://doi.org/10.1016/j.ast.2014.07.005
  7. Barzegar Gerdroodbary, M., Imani, M., Ganji, D.D. (2015) Investigation of film cooling on nose cone by a forward facing array of micro-jets in Hypersonic Flow. International Communications in Heat and Mass Transfer 64, 42-49. https://doi.org/10.1016/j.icheatmasstransfer.2015.02.015
  8. Barzegar Gerdroodbary, M., Jahanian, O., Mokhtari, M. (2015) Influence of the Angle of Incident Shock Wave on Mixing of Transverse Hydrogen Micro-jets in Supersonic Crossflow. International Journal of Hydrogen Energy 40, 9590-9601. https://doi.org/10.1016/j.ijhydene.2015.04.107
  9. Barzegar Gerdroodbary, M., Rahimi Takami, M., Ganji, D.D. (2015) Investigation of thermal radiation on traditional Jeffery-Hamel flow to stretchable convergent/ divergent channels. Case Studies Thermal Engineering 6, 28-39. https://doi.org/10.1016/j.csite.2015.04.002
  10. Barzegar Gerdroodbary, M., Takami, M.R., Heidari, H.R., Fallah, K., Ganji, D.D. (2016) Comparison of the single/ multi Transverse jets under the influence of shock wave in Supersonic Crossflow. Acta Astronautica 123, 283-291. https://doi.org/10.1016/j.actaastro.2016.03.031
  11. Bouet, R., Duplantier, S., Salvi, O. (2005) Ammonia large scale atmospheric dispersion experiments in industrial configurations. Journal of Loss Prevention in the Process Industries 18, 512-519. https://doi.org/10.1016/j.jlp.2005.07.016
  12. Bubbico, R., Mazzarotta, B., Verdone, N. (2014) CFD analysis of the dispersion of toxic materials in road tunnels. Journal of Loss Prevention in the Process Industries 28, 47-59. https://doi.org/10.1016/j.jlp.2013.05.002
  13. Cheng, Ch., Tan, W., Liu, L. (2014) Numerical simulation of water curtain application for ammonia release dispersion. Journal of Loss Prevention in the process Industries 30, 105-112. https://doi.org/10.1016/j.jlp.2014.05.003
  14. Dandrieux, A., Dusserre, G., Ollivier, J., Fournet, H. (2001) Effectiveness of water curtains to protect firemen in case of an accidental release of ammonia: comparison of the effectiveness for two different release rates of ammonia. Journal of Loss Prevention in the Process Industries 14, 349-355. https://doi.org/10.1016/S0950-4230(01)00021-3
  15. Di Sabatino, S., Buccolieri, R., Pulvirenti, B., Britter, R. (2008) Flow and pollutant dispersion in street canyons using FLUENT and ADMS-Urban. Environmental Modeling and Assessment 13, 369-381. https://doi.org/10.1007/s10666-007-9106-6
  16. Galeev, A.D., Ponikarov, S.I. (2014) Numerical analysis of toxic cloud generation and dispersion: A case study of the ethylene oxide spill. Process Safety and Environmental Protection 92, 702-713. https://doi.org/10.1016/j.psep.2013.12.004
  17. Galeev, A.D., Starovoytova, E.V., Ponikarov, S.I. (2013a) Numerical simulation of the consequences of liquefied ammonia instantaneous release using FLUENT software. Process Safety and Environmental Protection 91, 191-201. https://doi.org/10.1016/j.psep.2012.05.002
  18. Galeev, A.D., Salin, A.A., Ponikarov, S.I. (2013b) Consequence analysis of aqueous ammonia spill using computational fluid dynamics. Journal of Loss Prevention in the Process Industries 26, 628-638. https://doi.org/10.1016/j.jlp.2012.12.006
  19. Huang, C.H. (1979) Theory of dispersion in turbulent shear flow. Atmospheric Environment 13, 453-463. https://doi.org/10.1016/0004-6981(79)90139-2
  20. Jeong, S.J. (2014) Effect of Double Noise-Barrier on Air Pollution Dispersion around Road, Using CFD. Asian Journal of Atmospheric Environment 8(2), 81-88. https://doi.org/10.5572/ajae.2014.8.2.081
  21. Khan, F.I., Abbasi, S.A. (1999a) Modelling and control of the dispersion of hazardous heavy gases. Journal of Loss Prevention in the Process Industries 12, 235-244. https://doi.org/10.1016/S0950-4230(98)00009-6
  22. Khan, F.I., Abbasi, S.A. (1999b) HAZDIG: a new software package for assessing the risks of accidental release of toxic chemicals. Journal of Loss Prevention in the Process Industries 12, 167-181. https://doi.org/10.1016/S0950-4230(97)00043-0
  23. Khan, F.I., Abbasi, S.A. (2000) Cushioning the impact of toxic release from runaway industrial accidents with greenbelts. Journal of Loss Prevention in the Process Industries 13, 109-124. https://doi.org/10.1016/S0950-4230(99)00069-8
  24. Labovsky, J., Jelemensky, L′. (2011) Verification of CFD pollution dispersion modelling based on experimental data. Journal of Loss Prevention in the Process Industries 24, 166-177. https://doi.org/10.1016/j.jlp.2010.12.005
  25. Mack, A., Spruijt, M.P.N. (2013) Validation of OpenFoam for heavy gas dispersion applications. Journal of Hazardous Materials 262, 504-516. https://doi.org/10.1016/j.jhazmat.2013.08.065
  26. Ng, W.Y., Chau, C.K. (2014) A modeling investigation of the impact of street and building configurations on personal air pollutant exposure in isolated deep urban canyons. Science of the Total Environment 468-469.
  27. Pandya, N., Gabas, N., Marsden, E. (2012) Sensitivity analysis of Phast's atmospheric dispersion model for three toxic materials (nitric oxide, ammonia, chlorine). Journal of Loss Prevention in the Process Industries 25, 20-32. https://doi.org/10.1016/j.jlp.2011.06.015
  28. Pasquill, F. (1961) The estimation of the dispersion of windborne material. The Meteorological Magazine 90(1063), 33-49.
  29. Riddle, A., Carruthers, D., Sharpe, A., McHugh, C., Stocker, J. (2004) Comparison between FLUENT and ADMS for atmospheric dispersion modeling. Atmospheric Environment 38, 1029-1038. https://doi.org/10.1016/j.atmosenv.2003.10.052
  30. Schulte, N., Snyder, M., Isakov, V., Heist, D., Venkatram, A. (2014) Effects of solid barriers on dispersion of roadway emissions. Atmospheric Environment 97, 286-295. https://doi.org/10.1016/j.atmosenv.2014.08.026
  31. Sini, J.F., Anquetin, S., Mestayer, P.G. (1996) Pollutant dispersion and thermal effects in urban street canyons. Atmospheric Environment 30, 2659-2677. https://doi.org/10.1016/1352-2310(95)00321-5
  32. Sklavounos, S., Rigas, F. (2004) Validation of turbulence models in heavy gas dispersion over obstacles. Journal of Hazardous Materials 108, 9-20. https://doi.org/10.1016/j.jhazmat.2004.01.005
  33. Steffens, J.T., Heist, D.K., Perry, S.G., Zhang, K.M. (2013) Modeling the effects of a solid barrier on pollutant dispersion under various atmospheric stability conditions. Atmospheric Environment 69, 76-85. https://doi.org/10.1016/j.atmosenv.2012.11.051
  34. Steffens, J.T., Wang, Y.J., Zhang, K.M. (2012) Exploration of effects of a vegetation barrier on particle size distributions in a near-road environment. Atmospheric Environment 50, 120-128. https://doi.org/10.1016/j.atmosenv.2011.12.051
  35. Tauseef, S.M., Rashtchian, D., Abbasi, S.A. (2011) CFDbased simulation of dense gas dispersion in presence of obstacles. Journal of Loss Prevention in the Process Industries 24, 371-376. https://doi.org/10.1016/j.jlp.2011.01.014
  36. Vallero, D., Isukapalli, S. (2014) Simulating real-world exposures during emergency events: Studying effects of indoor and outdoor releases in the Urban Dispersion Program In upper Manhattan, NewYork. Journal of Exposure Science and Environmental Epidemiology 24, 279-289. https://doi.org/10.1038/jes.2013.38

Cited by

  1. Numerical investigation of the heat transfer of a ferrofluid inside a tube in the presence of a non-uniform magnetic field vol.132, pp.2, 2017, https://doi.org/10.1140/epjp/i2017-11324-1
  2. Effect of geometrical parameters on radiometric force in low-pressure MEMS gas actuator vol.24, pp.5, 2018, https://doi.org/10.1007/s00542-017-3653-9
  3. Application of Knudsen Thermal Force for Detection of CO2 in Low-Pressure Micro Gas Sensor vol.53, pp.6, 2018, https://doi.org/10.1134/S0015462818060149
  4. The flow feature of transverse hydrogen jet in presence of micro air jets in supersonic flow vol.59, pp.5, 2017, https://doi.org/10.1016/j.asr.2016.11.040
  5. Application of molecular force for mass analysis of Krypton/Xenon mixture in low-pressure MEMS gas sensor vol.150, pp.None, 2016, https://doi.org/10.1016/j.vacuum.2017.12.042
  6. Computational study of the cavity flow over sharp nose cone in supersonic flow vol.31, pp.6, 2016, https://doi.org/10.1142/s0129183120500795
  7. Injection of hydrogen sonic multi-jet on inclined surface at supersonic flow vol.32, pp.3, 2016, https://doi.org/10.1142/s0129183121500431
  8. Design of Road-Side Barriers to Mitigate Air Pollution near Roads vol.11, pp.5, 2016, https://doi.org/10.3390/app11052391
  9. Computational investigation of non-uniform magnetic field on thermal characteristic of nanofluid stream inside $ 180^{\circ }$ elbow pipe vol.35, pp.9, 2016, https://doi.org/10.1142/s0217984921501578