참고문헌
- Bindon, J. P., 1989, "The Measurement and Formation of Tip Clearance Loss," ASME Journal of Turbomachinery, Vol. 111, pp. 257-263. https://doi.org/10.1115/1.3262264
- Yamamoto, A., 1989, "Endwall Flow/Loss Mechanism in a Linear Turbine Cascade With Blade Tip Clearance," ASME Journal of Turbomachinery, Vol. 111, pp. 264-274. https://doi.org/10.1115/1.3262265
- Lee, S. W., Moon, H. S. and Lee, S. E., 2009, "Tip Gap Height Effects on Flow Structure and Heat/Mass Transfer over Plane Tip of a High-Turning Turbine Rotot Blade," International Journal of Heat and Fluid Flow, Vol. 30, pp. 198-210. https://doi.org/10.1016/j.ijheatfluidflow.2008.12.009
- Lee, S. W. and Chae, B. J., 2008, "Effects of Squealer Rim Height on Aerodynamic Losses Downstream of a High-Turning Turbine Rotor Blade," Experimental Thermal and Fluid Science, Vol. 32, pp. 1440-1447. https://doi.org/10.1016/j.expthermflusci.2008.03.004
- Lee, S. W. and Choi, M. Y., 2010, "Tip Gap Height Effects on the Aerodynamic Performance of a Cavity Squealer Tip in a Turbine Cascade in Comparison with Plane Tip Results: Part 2-Aerodynamic Loss," Experiments in Fluids, Vol. 49, pp. 713-723. https://doi.org/10.1007/s00348-010-0849-5
- Li, W., Jiang, H., Zhang, Q. and Lee, S. W., 2014, "Squealer Tip Leakage Flow Characteristics in Transonic Condition," ASME Journal of Engineering for Gas Turbines and Power, Vol. pp. 042601-1-042601-7.
- Lee, S. W., Kim, S. U. and Kim, K. H., 2012, "Aerodynamic Performance of Winglets Covering the Tip Gap Inlet in a Turbine Cascade," International Journal of Heat and Fluid Flow, Vol. 34, pp. 36-46. https://doi.org/10.1016/j.ijheatfluidflow.2011.11.008
- Seo, Y. C. and Lee, S. W., 2013, "Tip Gap Flow and Aerodynamic Loss Generation in a Turbine Casacde Eqipped with Suction-Side Winglers," Journal of Mechanical Science and Technology, Vol. 17, pp. 703-712.
- Cheon, J. H. and Lee, S. W., 2015, "Tip Leakage Aerodynamics over the Cavity Squealer Tip Equipped with Full Coverage Winglets in a Turbine Cascade," International Journal of Heat and Fluid Flow, Vol. 56, pp. 60-70. https://doi.org/10.1016/j.ijheatfluidflow.2015.07.003
- Lee, S. W., Cheon, J. H. and Zhang, Q., 2014, "The Effect of Full Coverage Winglets on Tip Leakage Aerodynamics over the Plane Tip in a Turbine Casacde," International Journal of Heat and Fluid Flow, Vol. 45, pp. 23-32. https://doi.org/10.1016/j.ijheatfluidflow.2013.11.006
- Lee, S. W. and Lee, S. E., 2014, "Tip Gap Flow Characteristics in a Turbine Cascade Equipped with Pressure-Side Partial Squealer Rims," International Journal of Heat and Fluid Flow, Vol. 50, pp. 369-377. https://doi.org/10.1016/j.ijheatfluidflow.2014.09.008
- Treaster, A. L. and Yocum, A. M., 1979, "The Calibration and Application of Five-Hole probes," ISA Transactions, Vol. 18, pp. 23-34.
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, "ASME Measurement Uncertainty," ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164. https://doi.org/10.1115/1.3242450