Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지
DOI QR코드

DOI QR Code

The effect of Zirconium Nitride coating on shear bond strength with denture base resin in Co-Cr alloy and titanium alloy

질화 지르코늄 코팅이 코발트 크롬 합금과 타이타늄 합금에서 의치상 레진과의 전단결합강도에 미치는 영향

  • Park, Chan (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Lee, Kyoung-Hun (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Lim, Hyun-Pil (Department of Prosthodontics, School of Dentistry, Chonnam National University)
  • 박찬 (전남대학교 치의학전문대학원 보철학교실) ;
  • 이경훈 (전남대학교 치의학전문대학원 보철학교실) ;
  • 임현필 (전남대학교 치의학전문대학원 보철학교실)
  • Received : 2016.07.18
  • Accepted : 2016.08.03
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: The purpose of this study was to evaluate of Zirconium Nitride (ZrN) coating on shear bond strength with denture base resin in Co-Cr and Ti-6Al-4V alloy. Materials and Methods: Co-Cr and Ti-6Al-4V alloy disks (10 mm in diameter, 2.5 mm in thickness; each other: n = 14) were prepared and divided with 2 groups each other by ZrN coating. After primer was applied to disks surface, denture base resin with diameter 6 mm, height 5 mm was bonded on metal disk surface. After surface roughness was measured by Profiler, shear bond strength was determined with Universal testing machine and analyzed with two-way ANOVA. The specimen surfaces and failure mode were examined using a scanning electron microscope. Results: ZrN coated groups showed significantly higher rough surface than non-coated groups (P < 0.05). Irrespective of alloy materials, shear bond strength of ZrN coated groups were lower than non-coated groups (P < 0.001). The scanning electron microscope (SEM) of ZrN coated groups showed mixed and adhesive fractures. Conclusion: ZrN coating weakened bonding strength between denture base resin and Co-Cr, Ti-6Al-4V alloy.

목적: 본 연구는 Co-Cr, Ti-6Al-4V 합금에 Zirconium Nitride (이하 ZrN) 적용 시, 의치상 레진과의 접착력을 비교하는 것이다. 연구 재료 및 방법: Co-Cr, Ti-6Al-4V 디스크(직경 10 mm, 두께 2.5 mm)를 각각 14개씩 제작하였고, ZrN 코팅에 따라 2개의 그룹으로 나누었다. Primer로 시편 전처리 후, 의치상 레진(직경 6 mm, 두께 5 mm)을 부착하였다. 표면 측정기를 이용하여 시편의 거칠기를 측정한 후, 만능 시험기를 이용하여 전단결합강도를 측정하였으며, 이원분산분석으로 통계 분석하였다. 시편 표면과 파절 양상을 주사전자현미경을 이용하여 관찰하였다. 결과: ZrN을 코팅한 시편에서 유의하게 높은 표면 거칠기를 나타내었고(P < 0.05), 전단결합강도는 낮았다(P < 0.001). ZrN 코팅 시편에서는 혼합성 파절과 부착성 파절이 함께 나타났다. 결론: Co-Cr, Ti-6Al-4V 합금에서 ZrN 코팅 처리는 의치상 레진과의 결합력을 약화시켰다.

Keywords

References

  1. Rodrigues RC, Macedo AP, de Torres EM, de Mattos Mda G, Ribeiro RF. Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures. Braz Dent J 2008;19:209-13. https://doi.org/10.1590/S0103-64402008000300006
  2. Pierce LH, Goodkind RJ. A status report of possible risks of base metal alloys and their components. J Prosthet Dent 1989;62:234-8. https://doi.org/10.1016/0022-3913(89)90320-X
  3. May KB, Van Putten MC, Bow DA, Lang BR. 4-META polymethyl methacrylate shear bond strength to titanium. Oper Dent 1997;22:37-40.
  4. Brown DT, Desjardins RP, Chao EY. Fatigue failure in acrylic resin retaining minor connectors. J Prosthet Dent 1987;58:329-35. https://doi.org/10.1016/0022-3913(87)90051-5
  5. Dunny JA, King GE. Minor connector designs for anterior acrylic resin bases: a preliminary study. J Prosthet Dent 1975;34:496-502. https://doi.org/10.1016/0022-3913(75)90035-9
  6. Jacobson TE. The significance of adhesive denture base resin. Int J Prosthodont 1989;2:163-72.
  7. Jacobson TE, Chang JC, Keri PP, Watanabe LG. Bond strength of 4-META acrylic resin denture base to cobalt chromium alloy. J Prosthet Dent 1988;60:570-6. https://doi.org/10.1016/0022-3913(88)90216-8
  8. Kim SS, Vang MS, Yang HS, Park SW, Lim HP. Effect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy. J Adv Prosthodont 2009;1: 41-6. https://doi.org/10.4047/jap.2009.1.1.41
  9. Kawano F, Miyamoto M, Tada N, Matsumoto N. Reinforcement of acrylic resin denture base with a Ni-Cr alloy plate. Int J Prosthodont 1990;3:484-8.
  10. Buth K. Gold-colored titanium nitride coating of non-precious metal adhesive bridge. Dent Labor (Munch) 1991;39:491-2.
  11. Wirz J. "Gold coloring" of denture bases with titanium nitride. Quintessenz 1989;40:2285-94.
  12. Laetzsch E, Blank K, Lunk A, Moller E, Pilgrim H. Gold-colored metal surface film in prosthetic treatment-preclinical studies. Stomatol DDR 1986;36: 269-72.
  13. Habig KH. Friction and wear of sliding couples coated with TiC, TiN or TiB2. Surf Coat Technol 1990;42:133-147. https://doi.org/10.1016/0257-8972(90)90120-2
  14. Al Jabbari YS. Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature. J Adv Prosthodont 2014; 6:138-145. https://doi.org/10.4047/jap.2014.6.2.138
  15. Endo K, Sachdeva R, Araki Y, Ohno H. Effects of titanium nitride coatings on surface and corrosion characteristics of Ni-Ti alloy. Dent Mater J 1994;13:228-39. https://doi.org/10.4012/dmj.13.228
  16. Oshida Y, Fung LW, Isikbay SC. Titanium-porcelain system. Part II: bond strength of fired porcelain on nitrided pure titanium. Biomed Mater Eng 1997;7:13-34.
  17. Budke E, Krempel-Hesse J, Maidhof H, Schussler H. Decorative hard coatings with improved corrosion resistance. Surf Coat Technol 1999;112:108-13. https://doi.org/10.1016/S0257-8972(98)00791-9
  18. Du J, Zhang P, Cai Z, Zhao J. The influence of substrate-target orientation on the properties of ZrN films deposited by arc ion plating. Physics Procedia 2011;18:181-6. https://doi.org/10.1016/j.phpro.2011.06.078
  19. Lai CH, Chang YY, Huang HL, Kao HY. Characterization and antibacterial performance of ZrCN/amorphous carbon coatings deposited on titanium implants. Thin Solid Films 2011;520:1525-31. https://doi.org/10.1016/j.tsf.2011.06.043
  20. Kojima K, Kadoma Y, Imai Y. Adhesion to precious metals utilizing triazine dithione derivative monomer. J Jpn Dent Mater 1987;6:702-7.
  21. Naylor WP, Kessler J, King A. Introduction to metal ceramic technology. Chicago; Quintessence Publishing Co; 1992. p. 27-113.

Cited by

  1. Evaluation of the effect of ultraviolet light polymerized clear adhesive on shear and tensile bond strength of heat cure denture base resin to the cobalt-chromium retentive minor connector: An in vitr vol.20, pp.4, 2020, https://doi.org/10.4103/jips.jips_85_20