참고문헌
- Ashdown, S. P., Loker, S., Schoenfelder, K., & Lyman-Clarke, L. (2004). Using 3D scans for fit analysis. Journal of Textile and Apparel, Technology and Management, 4(1), 1-12.
- Bye, E., & McKinney, E. (2010). Fit analysis using live and 3D scan models. International Journal of Clothing Science and Technology, 22(2/3), 88-100. https://doi.org/10.1108/09556221011018586
- Cha, S., & Kang, Y. (2013). Comparison of basic bodice block for adults women by 3D simulation-Focus of the DC suite program. Fashion business, 17(2), 63-81. https://doi.org/10.12940/jfb.2013.17.2.63
- Chen, C. M. (2007). Fit evaluation within the made-to-measure process. International Journal of Clothing Science and Technology, 19(2), 131-144. https://doi.org/10.1108/09556220710725720
- Cho, J. S., & Choi, J. W. (2002). A Study on Grading Practices of Women's Apparel Industry. Journal of the Korea Fashion & Costume Design Association, 4(3), 55-64.
- Choi, J., & Hong, K. (2015). 3D skin length deformation of lower body during knee joint flexion for the practical application of functional sportswear. Applied Ergonomics, 48, 186-201. https://doi.org/10.1016/j.apergo.2014.11.016
- (C)Youthhitech. (2015). YUKA CAD/Tutorial Super ALPHA : Plus. Seoul: 기술과 감성 [The technology and sensibility].
- Daanen, H., & Hong, S. A. (2008). Made-to-measure pattern development based on 3D whole body scans. International Journal of Clothing Science and Technology, 20(1), 15-25. https://doi.org/10.1108/09556220810843502
- Jang, E. Y. (2000). 패턴 CAD 활용 [The applications of the pattern CAD] -YUKA SYSTEM-. Seoul: 교학연구사. pp. 254-283.
- Jeong, Y. H., & Hong, K. H. (2006). Development of 2D Tight-fitting Pattern from 3D Scan Data. Journal of the Korean Society of Clothing and Textiles, 30(1), 157-166.
- Jeong, Y. H., Hong, K. H., & Kim, S. J.(2006). 3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation. Fibers and Polymers, 7(2), 195-202. https://doi.org/10.1007/BF02908267
- Jung, M. S. (2009). Study on the Basic Bodice Pattern Grading according to the Measurement Variations of the Body. The Korean Journal of Community Living Science, 20(4), 571-578.
- KATS[Korean Agency for Technology and Standards]. (2009). 성인 여성복의 치수 [Adult women's clothing size](KS K 0051). Seoul: KATS
- Kim, I., & Ha, J. S. (2012). A study on design characteristics in outdoor wear. Journal of the Korean Society of Fashion Design, 12(1), 93-109.
- Kim, N. Y., Wu, Y. J., & Hong, K. (2015). Design of 3D compression upper wear based on skin deformation during arm abduction. Korean Journal of Human Ecology, 24(5), 687-700. https://doi.org/10.5934/kjhe.2015.24.5.687
- Kim, S. Y., Jeong, Y. H., Lee, Y. J., & Hong, K. H. (2010). 3D pattern development of tight-fitting dress for an asymmetrical female manikin. Fibers and Polymers, 11(1), 142-146. https://doi.org/10.1007/s12221-010-0142-5
- Kim, S., & Nam, Y. (2016). A Study on the Classification of Lower Body Shape Type for Fit Evaluation of Slacks. Fashion business, 20(2), 181-196. https://doi.org/10.12940/jfb.2016.20.2.181
- Koo, Y. S. (2011). The effect of compression wear for the sport performance and muscle function. Textile coloration and finishing, 23(1), 60-68. https://doi.org/10.5764/TCF.2011.23.1.060
- Lee, H. (2013). Ergonomic Design and its 3D Pattern Development of Outdoor Pants Based on Skin Deformation in dynamic Postures (Unpublished doctoral dissertation). University of Chungnam National University, Daejeon, Korea.
- Lee, H. J., Kim, N. Y., Hong, K. H., & Lee, Y. J. (2015). Selection and Design of Functional Area of Compression Garment for Improvement in Knee Protection. Korean Journal of Human Ecology, 24(1), 97-109. https://doi.org/10.5934/kjhe.2015.24.1.97
- Lee, H. R., & Hong, K. H. (2005). Development of a Fitted Bodice Pattern Using a 3D Replica of Women's Upper Body. Journal of the Korean Society of Clothing and Textiles, 29(7), 1008-1017.
- Lee, H., Hong, K., & Lee, Y. (2013). Ergonomic mapping of skin deformation in dynamic postures to provide fundamental data for functional design lines of outdoor pants. Fibers and Polymers, 14(12), 2197-2201. https://doi.org/10.1007/s12221-013-2197-6
- Lee, J. H., Jun, J. I., & Choi, K. (2014). An Analysis of Compression Wear Designs and Structural Elements. Fashion & Textile Research Journal, 16(3), 421-433. https://doi.org/10.5805/SFTI.2014.16.3.421
- Lee, J., & Lee, J. (2013). Comparison on the pants fitting for obese women between 3D virtual garment and real garment. Fashion business, 17(2), 33-45. https://doi.org/10.12940/jfb.2013.17.2.33
- Lee, M. J., & Sohn, H. S. (2012). A comparative analysis of the different between CLO 3D avatar sizing and actual body measurement shapes. Fashion business, 16(4), 137-151. https://doi.org/10.12940/jfb.2012.16.4.137
- Lee, Y., & Lee, B. (2012). Effects of 2D Pattern Reduction Rate and Fabric Elasticity on 3D Clothing Deformation. Journal of The Korean Society of Living Environmental System, 19(2), 247-258.
- Lim, J. Y. (2010). A Study on the Obese Junior-High School Girls' Slacles Sizing System and Slacks Pattern Grading. Fashion & Textile Research Journal, 12(2), 194-202. https://doi.org/10.5805/KSCI.2010.12.2.194
- Lim, J. Y., & Kim, Y. W. (2009). A development of the slacks pattern grading rule for middle-aged abdominal obese women. Fashion & Textile Research Journal, 11(5), 771-778.
- Paek, K. J., Yoo K. J., & Lee, J. R. (2002). A Study on the Pattern Grading for Men's Formal Wear. Journal of the Korean Society of Clothing and Textiles, 26(6), 843-852.
- Park, G. A., & Lee, W. K. (2012). Men's work clothes jumper pattern-making and its appearance evaluation through 3-D clothing simulation. Fashion business, 16(1), 103-120. https://doi.org/10.12940/jfb.2012.16.1.103
- Shin, J. H., & Sohn, H. S. (2013). A study on the development of basic bodice block pattern by women's body type from 3D virtual clothing system: Focusing on early 20's women. Journal of the Korea Fashion & Costume Design Association, 15(2), 1-13.
- Shoben, M., & Taylor, P. (2004). Grading for the Fashion Industry: The Theory and Practice. LCFS Fashion Media.
- Varghese, N., & Thilagavathi, G. (2012). Fit of Sari Blouse: Influencing Parameters and Assessment. Journal of Textile and Apparel, Technology and Management, 7(4).
- Wu, Y., & Hong, K. H. (2012). Methods of Merging a 3D Replica and Ease Distribution for Woman's Pant Patterns. Journal of the Korean Society of Clothing and Textiles, 36(4), 443-453. https://doi.org/10.5850/JKSCT.2012.36.4.443
- Xu, J. H., Chen, X. F., & Zhang, W. B. (2009). A Study on Area Ease Distribution between Body and Garment. Journal of Fiber Bioengineering and Informatics, 2(2), 101-107.
피인용 문헌
- 3차원 데이터를 활용하여 시니어를 대상으로 한 바디쉐이퍼의 보정기능성 평가 vol.21, pp.2, 2019, https://doi.org/10.5805/sfti.2019.21.2.220