DOI QR코드

DOI QR Code

Investigation of buckling behavior of functionally graded piezoelectric (FGP) rectangular plates under open and closed circuit conditions

  • Ghasemabadian, M.A. (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Kadkhodayan, M. (Department of Mechanical Engineering, Ferdowsi University of Mashhad)
  • 투고 : 2016.02.07
  • 심사 : 2016.07.11
  • 발행 : 2016.10.25

초록

In this article, based on the higher-order shear deformation plate theory, buckling analysis of a rectangular plate made of functionally graded piezoelectric materials and its effective parameters are investigated. Assuming the transverse distribution of electric potential to be a combination of a parabolic and a linear function of thickness coordinate, the equilibrium equations for the buckling analysis of an FGP rectangular plate are established. In addition to the Maxwell equation, all boundary conditions including the conditions on the top and bottom surfaces of the plate for closed and open circuited are satisfied. Considering double sine solution (Navier solution) for displacement field and electric potential, an analytical solution is obtained for full simply supported boundary conditions. The accurate buckling load of FGP plate is presented for both open and closed circuit conditions. It is found that the critical buckling load for open circuit is more than that of closed circuit in all loading conditions. Furthermore, it is observed that the influence of dielectric constants on the critical buckling load is more than those of others.

키워드

참고문헌

  1. Abdollahi, M., Saidi, A. and Mohammadi, M. (2015), "Buckling analysis of thick functionally graded piezoelectric plates based on the higher-order shear and normal deformable theory", Acta Mechanica, 226(8), 1-14. https://doi.org/10.1007/s00707-014-1156-7
  2. Akbarov, S.D. and Yahnioglu, N. (2013a), "Buckling delamination of a sandwich plate-strip with piezoelectric face and elastic core layers", Appl. Math. Model., 37(16), 8029-8038. https://doi.org/10.1016/j.apm.2013.02.051
  3. Akgoz, B. and Civalek, O. (2014a), "Thermo-mechanical buckling behavior of functionally graded microbeams embedded in elastic medium", Int. J. Eng. Sci., 85, 90-104. https://doi.org/10.1016/j.ijengsci.2014.08.011
  4. Akhras, G. and Li, W. (2010a), "Three-dimensional thermal buckling analysis of piezoelectric antisymmetric angle-ply laminates using finite layer method", Compos. Struct., 92(1), 31-38. https://doi.org/10.1016/j.compstruct.2009.06.010
  5. Batra, R. and Geng, T. (2001a), "Enhancement of the dynamic buckling load for a plate by using piezoceramic actuators", Smart Mater. Struct., 10(5), 925-933. https://doi.org/10.1088/0964-1726/10/5/309
  6. Bodaghi, M. and Saidi, A. (2010b), "Levy-type solution for buckling analysis of thick functionally graded rectangular plates based on the higher-order shear deformation plate theory", Appl. Math. Model., 34(11), 3659-3673. https://doi.org/10.1016/j.apm.2010.03.016
  7. Brush, D.O. and Almroth, B. (1979), Buckling of Bars, Plates, and Shells, McGraw-Hill, New York.
  8. Chandrashekhara, K. and Bhatia, K. (1993), "Active buckling control of smart composite plates-finiteelement analysis", Smart Mater. Struct., 2(1), 31-39. https://doi.org/10.1088/0964-1726/2/1/005
  9. Civalek, O. (2004a), "Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns", Eng. Struct., 26(2), 171-186. https://doi.org/10.1016/j.engstruct.2003.09.005
  10. Civalek, O., Korkmaz, A. and Demir, C. (2010c), "Discrete singular convolution approach for buckling analysis of rectangular Kirchhoff plates subjected to compressive loads on two-opposite edges", Adv. Eng. Softw., 41(4), 557-560. https://doi.org/10.1016/j.advengsoft.2009.11.002
  11. Ebrahimi, F., Rastgoo, A. and Atai, A. (2009a), "A theoretical analysis of smart moderately thick shear deformable annular functionally graded plate", Euro. J. Mech. A/Solid., 28(5), 962-973. https://doi.org/10.1016/j.euromechsol.2008.12.008
  12. Fereidoon, A., Yaghoobi, H. and Dehghanian, A. (2014b), "An analytical approach for buckling behavior of temperature-dependent laminated piezoelectric functionally graded plates under thermo-electromechanical loadings and different end supports", Int. J. Comput. Meth., 11(04), 1350099. https://doi.org/10.1142/S0219876213500990
  13. Hosseini-Hashemi, S., Khorshidi, K. and Amabili, M. (2008a), "Exact solution for linear buckling of rectangular Mindlin plates", J. Sound Vib., 315(1), 318-342. https://doi.org/10.1016/j.jsv.2008.01.059
  14. Jadhav, P. and Bajoria, K. (2013b), "Stability analysis of piezoelectric FGM plate subjected to electromechanical loading using finite element method", Int. J. Appl. Sci. Eng., 11(4), 375-391.
  15. Jalili, N. (2009b), Piezoelectric-based vibration control: from macro to micro/nano scale systems, Springer Science & Business Media.
  16. Javaheri, R. and Eslami, M. (2002a), "Thermal buckling of functionally graded plates", AIAA J., 40(1), 162-169. https://doi.org/10.2514/2.1626
  17. Javaheri, R. and Eslami, M. (2002b), "Thermal buckling of functionally graded plates based on higher order theory", J. Therm. Stress., 25(7), 603-625. https://doi.org/10.1080/01495730290074333
  18. Jones, R.M. (2006a), Buckling of bars, plates, and shells, Bull Ridge Corporation.
  19. Kapuria, S. and Achary, G. (2006b), "Nonlinear coupled zigzag theory for buckling of hybrid piezoelectric plates", Compos. Struct., 74(3), 253-264. https://doi.org/10.1016/j.compstruct.2005.04.010
  20. Kim, G.W. and Lee, K.Y. (2008b), "Influence of weak interfaces on buckling of orthotropic piezoelectric rectangular laminates", Compos. Struct., 82(2), 290-294. https://doi.org/10.1016/j.compstruct.2007.01.006
  21. Kim, S.E., Thai, H.T. and Lee, J. (2009c), "Buckling analysis of plates using the two variable refined plate theory", Thin Wall. Struct., 47(4), 455-462. https://doi.org/10.1016/j.tws.2008.08.002
  22. Kuo, S.R. and Yau, J. (2012), "Buckling equations of orthotropic thin plates", J. Mech., 28(03), 555-567. https://doi.org/10.1017/jmech.2012.64
  23. Lanhe, W. (2004b), "Thermal buckling of a simply supported moderately thick rectangular FGM plate", Compos. Struct., 64(2), 211-218. https://doi.org/10.1016/j.compstruct.2003.08.004
  24. Mirzavand, B. and Eslami, M. (2011a), "A closed-form solution for thermal buckling of piezoelectric FGM rectangular plates with temperature-dependent properties", Acta Mechanica, 218(1-2), 87-101. https://doi.org/10.1007/s00707-010-0402-x
  25. Mohammadi, M., Saidi, A. and Jomehzadeh, E. (2010d), "A novel analytical approach for the buckling analysis of moderately thick functionally graded rectangular plates with two simply-supported opposite edges", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(9), 1831-1841. https://doi.org/10.1243/09544062JMES1804
  26. Mohammadi, M., Saidi, A.R. and Jomehzadeh, E. (2010e), "Levy solution for buckling analysis of functionally graded rectangular plates", Appl. Compos. Mater., 17(2), 81-93. https://doi.org/10.1007/s10443-009-9100-z
  27. Panahandeh-Shahraki, D., Mirdamadi, H.R. and Vaseghi, O. (2014c), "Fully coupled electromechanical buckling analysis of active laminated composite plates considering stored voltage in actuators", Compos. Struct., 118, 94-105. https://doi.org/10.1016/j.compstruct.2014.07.008
  28. Rad, A.A. and Panahandeh-Shahraki, D. (2014d), "Buckling of cracked functionally graded plates under tension", Thin Wall. Struct., 84, 26-33. https://doi.org/10.1016/j.tws.2014.05.005
  29. Shariat, B.S. and Eslami, M. (2007), "Buckling of thick functionally graded plates under mechanical and thermal loads", Compos. Struct., 78(3), 433-439. https://doi.org/10.1016/j.compstruct.2005.11.001
  30. Shariyat, M. (2009d), "Dynamic buckling of imperfect laminated plates with piezoelectric sensors and actuators subjected to thermo-electro-mechanical loadings, considering the temperature-dependency of the material properties", Compos. Struct., 88(2), 228-239. https://doi.org/10.1016/j.compstruct.2008.03.044
  31. Shariyat, M. (2009e), "Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions", Compos. Struct., 88(2), 240-252. https://doi.org/10.1016/j.compstruct.2008.04.003
  32. Shen, H.S. (2001b), "Postbuckling of shear deformable laminated plates with piezoelectric actuators under complex loading conditions", Int. J. Solid. Struct., 38(44), 7703-7721. https://doi.org/10.1016/S0020-7683(01)00120-2
  33. Shen, H.S. (2001c), "Thermal postbuckling of shear-deformable laminated plates with piezoelectric actuators", Compos. Sci. Tech., 61(13), 1931-1943. https://doi.org/10.1016/S0266-3538(01)00099-9
  34. Shen, H.S. (2005), "Postbuckling of FGM plates with piezoelectric actuators under thermo-electromechanical loadings", Int. J. Solid. Struct., 42(23), 6101-6121. https://doi.org/10.1016/j.ijsolstr.2005.03.042
  35. Shen, H.S. (2009f), "A comparison of buckling and postbuckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators", Compos. Struct., 91(3), 375-384. https://doi.org/10.1016/j.compstruct.2009.06.005
  36. Sheng, G. and Wang, X. (2010f), "Thermoelastic vibration and buckling analysis of functionally graded piezoelectric cylindrical shells", Appl. Math. Model., 34(9), 2630-2643. https://doi.org/10.1016/j.apm.2009.11.024
  37. Varelis, D. and Saravanos, D.A. (2004c), "Coupled buckling and postbuckling analysis of active laminated piezoelectric composite plates", Int. J. Solid. Struct., 41(5), 1519-1538. https://doi.org/10.1016/j.ijsolstr.2003.09.034
  38. Yang, Y. (1998), "Buckling of a piezoelectric plate", Int. J. Appl. Electromag. Mech., 9(40), 399-408.
  39. Yoo, C.H. and Lee, S. (2011b), Stability of structures: principles and applications, Elsevier.

피인용 문헌

  1. Surface energy effect on nonlinear buckling and postbuckling behavior of functionally graded piezoelectric cylindrical nanoshells under lateral pressure vol.5, pp.4, 2018, https://doi.org/10.1088/2053-1591/aab914
  2. A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates vol.13, pp.3, 2016, https://doi.org/10.12989/gae.2017.13.3.385
  3. Thermo-electrical buckling response of actuated functionally graded piezoelectric nanoscale plates vol.13, pp.None, 2016, https://doi.org/10.1016/j.rinp.2019.102192
  4. A semi-analytical mesh-free method for 3D free vibration analysis of bi-directional FGP circular structures subjected to temperature variation vol.73, pp.4, 2016, https://doi.org/10.12989/sem.2020.73.4.407
  5. Bending response of functionally graded piezoelectric plates using a two-variable shear deformation theory vol.7, pp.2, 2016, https://doi.org/10.12989/aas.2020.7.2.115