드라이브 ㆍ 컨트롤 (Journal of Drive and Control)

  • 제13권3호
  • /
  • Pages.53-66
  • /
  • 2016
  • /
  • 2671-7972(pISSN)
  • /
  • 2671-7980(eISSN)
유공압건설기계학회 (The Korean Society for Fluid Power and Construction Equipment)
권호 표지
DOI QR코드

DOI QR Code

건설기계의 에너지 효율 제고를 위한 비-하이브리드 신기술에 관한 리뷰

A Review on New Non-hybrid Technologies to Improve Energy Efficiency of Construction Machineries

  • Joh, Joong Seon (Department of Control & Instrumentation Engineering, Changwon National University)
  • 투고 : 2016.05.11
  • 심사 : 2016.07.13
  • 발행 : 2016.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

New non-hybrid approaches to improve energy efficiency of construction machineries are reviewed in this paper. Hydraulic systems are classified into four classes according to Backe's classification and commercially promising new technologies are carefully chosen in each class. IMV, 3-Line CPR, Closed Circuit Displacement Control of Differential Cylinder, and Throttle-less Secondary Control are chosen as representative non-hybrid new technologies. Key principle of each technology is explained and representative references which run through each technology are selected. Advantages and weaknesses of each technology are discussed and compared from the view point of construction machinery manufacturers.

키워드

참고문헌

  1. M. Kagoshima, T. Nanjo and A. Tsutsui, "Development of New Hybrid Excavator", Kobelco Technology Review, No. 27, 2007, (available from http://www.kobelco.co.jp/english/ktr/pdf/ktr_27/039-042.pdf)
  2. www.kyotoprotocol.com/
  3. Eaton, "Eaton Medium Duty Piston Pumps: Load Sensing Systems Principle of Operation", No. 03-206, November 1992
  4. C. Williamson, J. Zimmerman and M. Ivantysynova, "Efficiency Study of an Excavator Hydraulic System Based on Displace-Controlled Actuators", ASME/Bath Workshop on Fluid Power and Motion Control (FPMC08), Bath, UK, 2008
  5. B. Eriksson, "Control Strategy for Energy Efficient Fluid Power Actuators: Utilizing Individual Metering", M.Sc. Thesis, Linkopings University, pp. 19-20, 2007
  6. W. Backe, "Hydraulic Drives with High Efficiency", Fluid power systems and technology, Vol. 2, pp. 45-73, 1995
  7. M. Murrenhoff, S. Sgro and M. Vukovic, "An Overview of Energy Saving Architectures for Mobile Applications: A framework to classify mobile hydraulic systems", Proc. of the 9th Int. Fluid Power Conf., Aachen, Germany, 2014.
  8. K. Tabor, "A Novel Method of Controlling a Hydraulic Actuator with Four Valve Independent Metering Using Load Feedback", SAE International Commercial Vehicle Engineering Congress and Exhibition, 2005
  9. A. Jansson and J. Palmberg, "Seperate Controls of Meter-in and Meter-out Orifices in Mobile Hydraulic Systems", SAE International Off-highway and Powerplant Congress and Exposition, 1990
  10. R. Book and C. Goering, "Programmable Electrohydraulic Valve", SAE International Off-highway and Powerplant Congress and Exposition, 1999
  11. J. Aardema, "Hydraulic Circuit Having Dual Electrohydraulic Control Valves", U. S. Patent 5,568,759, 1996
  12. C. DeBoer and B. Yao, "Velocity Control of Hydraulic Cylinders with Only Pressure Feedback", Proc. of IMECE'01, 2001 ASME Int. Mechanical Engineering Congress and Exposition, pp. 1-9, Nov. 11-16, 2001, N.Y., USA
  13. B. Eriksson, "Mobile Fluid Power Systems Design: with a Focus on Energy Efficiency", Ph.D. Thesis, Linkopings University, 2010
  14. Parker Hannifin AB, "Fluid Valve Arrangement", US Patent No. US 2011/0017310 A1, Jan. 27, 2011
  15. Parker Hannifin Co., "Fluid Valve Arrangement", US Patent No. US 2013/0074955 A1, Mar. 28, 2013
  16. Parker Hannifin Co., "Independent Metering Valve for Mobile Equipment", International Patent No. WO 2015/164321 A1, Oct. 29, 2015
  17. K. Tabor, "Optimal Velocity Control and Cavitation Prevention of a Hydraulic Actuator Using Four Valve Independent Metering", SAE International Commercial Vehicle Engineering Congress and Exhibition, 2005
  18. J. Pfaff, "Distributed Electro-Hydraulic Systems for Telehandlers", The 50th National Conf. on Fluid Power, March 16-18, pp. 779-784, 2005
  19. S. Liu and B. Yao, "Coordinate Control of Energy Saving Programmable Valves", IEEE Trans. on Control Systems Technology, Vol. 16, No. 1, pp. 34-45, 2008 https://doi.org/10.1109/TCST.2007.903073
  20. Eaton, "Ultronics ZTS16 Twin Spool Valve", Technical Sheet, 2010
  21. B. Andersson, "On thr Valvistor - A Proportionally Controlled Seat Valve", Ph.D. Thesis No. 108, Division of Fluid Power Control, Linkopings University, 1984
  22. B. Eriksson, J. Larsson and J. Palmberg, "A Novel Valve Concept Including the Valvistor Poppet Valve", HIDRAVLICNA KRMILJA, Ventil 14, pp. 438-442, 2008
  23. P. Opdenbosch, "Auto-calibration and Control Applied to Electro-hydraulic Valves", Ph.D. Thesis, Georgia Institute of Technology, 2007
  24. HUSCO International, "INCOVA" brochure, 2007 (Available at http://www.incova.com/)
  25. M. Linjama, K. Koskinen and M. Vilenius, "Accurate Trajectory Tracking Control of Water Hydraulic Cylinder with Non-ideal ON/OFF Valves", Int. J. of Fluid Power 4, No. 1, pp. 7-16, 2003 https://doi.org/10.1080/14399776.2003.10781151
  26. M. Linjama et al., "Mechatronic Design of Digital Hydraulic Micro Valve Package", ELSEVIER Procedia Engineering 106, pp. 97-107, 2015 https://doi.org/10.1016/j.proeng.2015.06.013
  27. P. Dengler, J. Groh and M. Geimer, "Valve Control Concepts in a Constant Pressure System with an Intermediate Pressure Line", 21st Int. Conf. on Hydraulics and Pneumatics, June 1-3, 2011
  28. P. Dengler et al., "Efficiency Improvement of a Constant Pressure System Using an Intermediate Pressure Line", 8th Int. Fluid Power Conf., Dresden, Germany, March 26-28, 2012
  29. P. Dengler and R. Dombrowski, "Efficient Optimization of Hydrostatic System Using an Intermediate Line", 7th FPNI PhD Symposium on Fluid Power, Reggio Emilia, Italy, June 27-30, 2012
  30. A. Hewett, "Hydraulic Circuit Flow Control", U.S. Patent No. 5,329,767, 1994
  31. M. Ivantysynova, "Displacement Controlled Linear and Rotary Drives for Mobile Machines with Automatic Motion Control", SAE International Off-Highway & Powerplant Congress & Exposition, Milwaukee, Wisconsin, Sept. 11-13, 2000
  32. R. Rahmfeld, "Development and Control of Energy Saving Hydraulic Servo Drives for Mobile Systems", Ph.D. Thesis, Technical University of Hamburg-Harburg, 2002
  33. J. Zimmerman, E. Busquets and M. Ivantysynova, "40% Fuel Savings by Displacement Control Leads to Lower Working Temperatures - A Simulation Study and Measurements", Proceedings of the 52nd National Conf. on Fluid Power, Las Vegas, USA, March 2011
  34. C. Williamson, "Power Management for Multi-Actuator Mobile Machines with Displacement Controlled Hydraulic Actuators", Ph.D. Thesis, Purdue University, 2010
  35. R. Hippalgaonkar and M. Ivantysynova, "Optimal Power Management of Hydraulic Hybrid Mobile Machines Part I: Theoretical Studies, Modeling and Simulation", J. of Dynamic Systems, Measurement, and Control, Vol. 138, 2016
  36. R. Hippalgaonkar and M. Ivantysynova, "Optimal Power Management of Hydraulic Hybrid Mobile Machines Part 2: Machine Implementation and Measurement", J. of Dynamic Systems, Measurement, and Control, Vol. 138, 2016
  37. E. Busquets and M. Ivantysynova, "Toward Supervisory-Level Control for the Energy Consumption and Performance Optimization of Displacement-Controlled Hydraulic Hybrid Machines", Proceedings of 10th IFK Int. Conf. on Fluid Power, Dresden, Germany, March 2016
  38. http://www.innas.com/
  39. P. Achten, Z. Fu and G. Vael, "Transforming Future Hydraulics: A New Design of a Hydraulic Transformer", The 5th Scandinavian Int. Conf. on Fluid Power, SICFP. Vol. 97, 1997
  40. P. Achten et al., "Dedicated Design of the Hydraulic Transformer", 3rd Int. Fluid Power Conf., Aachen, Germany, March 2002
  41. P. Achten, "A Hydraulic Transformer with a Swash Block Control Around Three Axis of Rotation", Key Note Speech, 8th IFK, Dresden, Germany, March 28, 2012 (available at http://www.innas.com/)
  42. P. Achten et al., "A Four-Quadrant Hydraulic Transformer for Hybrid Vehicles", 11th Scandinavian Int. Conf. on Fluid Power, SICFP'09, June 2-4, 2009, Linkopings, Sweden
  43. E. Bishop, "Digital Hydraulic System", U.S. Patent No. 7,475,538 B2, 2009
  44. E. Bishop, "Digital Hydraulic System", U.S. Patent No. cB2, 2012
  45. D. Gier and G. Gerardus, "Hydraulic Cylinder for Use in a Hydraulic Tool", European Patent No. EP 1 580 437 A1, 2005
  46. M. Linjama et al., "Secondary Controlled Multi-Chamber Hydraulic Cylinder", 11th Scandinavian Int. Conf. on Fluid Power, SICFP'09, Linkopings, Sweden, June 2-4, 2009
  47. http://www.norrhydro.com/
  48. A. Sipola, J. Makitalo and J. Hautamaki, "The Product Called NORRDIGITM", 5th Workshop on Digital Fluid Power, Tampere, Finland, Oct. 24-25, 2012
  49. A. Amico et al., "Investigation of a Digital Hydraulic Actuation System on an Excavator Arm", 13th Scandinavian Int. Conf. on Fluid Power, SICFP2013, Linkopings, Sweden, June 3-5, 2013
  50. K. Heybroek and E. Norlin, "Hydraulic Multi-Chamber Cylinders in Construction Machinery", In Hydraulikdagarna, Linkopings, Sweden, March 16-17, 2015
  51. S. Salter, "Improved Fluid-working Machine", European Patent No. 0 494 236 B1, 1990
  52. S. Salter and W. Rampen, "The Wedding Cake Multi-eccentric Radial Piston Hydraulic Machine with Direct Computer Control of Displacement", Proc. of the 10th Conference on Fluid Power, pp. 47-64, 1993
  53. Md. Ehsan, W. Rampen and S. Salter, "Computer Simulation of the Performance of Digital- Displacement Pump-Motors", FPST-Vol. 3, Fluid Power Systems and Technology: Collected Papers ASME, pp. 19-24, 1996
  54. Md. Ehsan, W. Rampen and S. Salter, "Modeling of Digital-Displacement Pump- Motors and Their Application as Hydraulic Drives for Nonuniform Loads", Transactions of the ASME, Vol. 122, pp. 210-215, 2000
  55. C. Yigen, "Control of a Digital Displacement Pump", M.Sc. Thesis, Aalborg University, 2012
  56. K. Merrill, M. Holland and J. Lumkes, "Efficiency Analysis of a Digital Pump/Motor as Compared to a Valve Plate Design", 7th Int. Fluid Power Conference, 22-24 March 2010, Aachen, Germany, pp. 313-324, 2010
  57. K. Merrill and J. Lumkes, "Operating Strategies and Valve Requirements for Digital Pump/Motors", Proc. of 6th FPNI-PhD Symp. West Lafayette 2010, pp. 249-258, 2010
  58. http://www.artemisip.com/
  59. Personal communication with Dr. Rampen of Artemis Intelligent Power Co. Ltd.
  60. Artemis Co. Ltd., "Technical Sheet: E-dyn 96 Industrial Pump", 2015 (available from http://www.artemisip.com/sites/default/files/docs/Industrial%20pump%20leaflet%202015-04-03.pdf)
  61. http://www.artemisip.com/applications/off-road
  62. P. Achten, "Designing the Impossible Pump", Proc. Hydraulikdagar, Linkopings, Sweden, 2003
  63. P. Achten et al., "Design and Testing of an Axial Piston Pump Based on the Floating Cup Principle", 8th Scandinavian Int. Conf. on Fluid Power, SICFP'03, Tampere, Finland, May 7-9, 2003
  64. P. Achten, "Convicted to Innovation in Fluid Power", Proc. IMechE Vol. 224 Part I: J. Systems and Control Engineering, pp. 619-621, 2010

피인용 문헌

  1. Modeling and Energy Management Strategy in Energetic Macroscopic Representation for a Fuel Cell Hybrid Electric Vehicle vol.16, pp.2, 2019, https://doi.org/10.7839/ksfc.2019.16.2.080