References
- Shin, K. S., "Effect of Surface Roughness on Cutting Conditions in CNC lathe C-Axis Milling Arc Cutting," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 99-105, 2014.
- Noh, Y. H., "A Study on Surface Roughness of Aluminum 7075 to Nose Radius and Cooling Method in CNC Lathe Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 85-91, 2015.
- Chun, S. H., "Effects of cutting condition on surface roughness in the spiral up milling of aluminum alloy," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 83-90, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.083
- Lee, Y. C., Shin, G. H., and Kwak, T. S., "Deburring Technology of Vacuum Plate for MLCC Lamination Using Magnetic Abrasive Polishing and ELID Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 149-154, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.149
- Li, H., Ko, T. J., and Baek, D. K., "A Study on Preventing Cracks at the Small Hole Exit in Ultrasonic Machining Using a Wax Coating," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 105-111, 2015.
- Kim, J., Min, S., and Dornfeld, D. A., "Optimization and control of drilling burr formation of AISI 304L and AISI4118 based on drilling burr control charts," International Journal of Machine Tools and Manufacture, Vol. 41, No. 7, pp. 923-936, 2001. https://doi.org/10.1016/S0890-6955(00)00131-0
- Min, S., and Dornfeld, D. A., Kim, J., and Shyu, B., "Finite element modeling of burr formation in metal cutting," Machining science and technology, Vol. 5, No. 3, pp. 307-322, 2001. https://doi.org/10.1081/MST-100108617
- Jeong, Y. H., HanYoo, B., Lee, H. U., Min, B. K., Cho, D. W., and Lee, S. J., "Deburring microfeatures using micro-EDM," Journal of Materials Processing Technology, Vol. 209, No. 14, pp. 5399-5406, 2009. https://doi.org/10.1016/j.jmatprotec.2009.04.021
- Lee, S. H., and Dornfeld, D. A., "Precision laser Deburring," Jounal of Manufacturing Science and Engineering, Vol. 123, No. 4, pp. 601-608, 2001. https://doi.org/10.1115/1.1381007
- Lee, K. U., and Ko, S. L., ."Development of Deburring Tool for Burrs at Intersecting Holes," Journal of Materials Processing Technology, Vol. 20, No. 1, pp. 454-459, 2008.
- Park, H. Y., "Development of Deburring tool for the improvement of the cleanability of mechanical part," A Thesis of Master's degree, Konkuk Univeristy, Republic of Korea, 2010.
- Ton, T. P., Park, H. Y., and Ko, S. L., "Experiment alanalysis of deburring process on inclined exit surface by new deburring tool," CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 129-132, 2011. https://doi.org/10.1016/j.cirp.2011.03.124
- Ko, S. L., "Measurement and Effective Deburring for the Micro Burrs in Piercing Operation," International Journal of Korean Society of Precision Engineering and manufacturing, Vol. 1, No. 1, pp. 152-159, 2000.
- Min, S., and Dornfeld, D. A., and Nakao, Y. "Influence of exit surface angle on drilling burr formation," Journal of Manufacturing Science and Engineering, Vol. 125, No. 4, pp. 637-644, 2003. https://doi.org/10.1115/1.1596573
Cited by
- A Study on the Drilling Performance of the Assembly Machine for the an Aircraft’s Main Wings vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.008
- Evaluation of a hybrid cryogenic deburring method to remove uncut fibers on carbon fiber-reinforced plastic composites vol.101, pp.5, 2016, https://doi.org/10.1007/s00170-018-3045-z
- Automatic Design of Hot Air Process for Deburring of Blow Injection Molded Products vol.28, pp.4, 2019, https://doi.org/10.7735/ksmte.2019.28.4.232
- 면취 공정의 능동 제어를 위한 공압식 자동 강재 면취기와 센서 시스템의 제작 및 실험 vol.19, pp.12, 2016, https://doi.org/10.14775/ksmpe.2020.19.12.080
- 구멍가공 시 경사진 출구면에 발생한 버의 효율적 제거를 위한 디버링 공구의 공구경사각과 강성의 결정 vol.20, pp.6, 2016, https://doi.org/10.14775/ksmpe.2021.20.06.001