한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제15권3호
  • /
  • Pages.86-92
  • /
  • 2016
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

방전과 엔드밀링이 결합된 하이브리드 공정의 가공특성

Machining Characteristics of the Hybrid Machining System Comprising of EDM and Endmilling

  • Kim, Min-Yeop (School of Mechanical Engineering, Yeungnam UNIV.) ;
  • Li, Chang-Ping (School of Mechanical Engineering, Yeungnam UNIV.) ;
  • Kim, Jung-Hyun (School of Mechanical and Automotive Engineering, Kyungil UNIV.) ;
  • Ko, Tae Jo (School of Mechanical Engineering, Yeungnam UNIV.)
  • 투고 : 2016.03.06
  • 심사 : 2016.04.18
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Mechanical milling, in association with electrical discharge machining (EDM) for hybrid machining, is presented in this paper. An end mill cutting tool, an electrode of the EDM, was used for the system. That means that some parts were cut by the mechanical cutting process and others by the EDM. The possibility of combining both processes was simulated with the cutting simulation software. In addition, the machining reality was verified by measuring the electrical signal from the EDM power supply, which was measured in time and frequency domains. From this initial research, the hybrid machining system proposed in this paper appears to be well suited for difficult to cut material processing.

키워드

참고문헌

  1. Kozak, J. and Rajurkar, K. P., "Hybrid machining process evaluation and development," Proceedings of 2nd international conference on machining and measurements of sculptured surfaces, Keynote Paper, pp. 501-536, 2000.
  2. El-Hofy, H., Advanced machining processes: nontraditional and hybrid machining processes, McGraw Hill Professional, pp. 1-13, 2005.
  3. Yu, Z., Jun, T., and Masanori, K., "Dry electrical discharge machining of cemented carbide," Journal of materials processing technology, Vol. 149, No. 1, pp. 353-357, 2004. https://doi.org/10.1016/j.jmatprotec.2003.10.044
  4. Lim, H. S., Wong, Y. S., Rahman, M., and Lee, M. E., "A study on the machining of high-aspect ratio micro-structures using micro-EDM," Journal of Materials Processing Technology, Vol. 140, No. 1, pp. 318-325, 2003. https://doi.org/10.1016/S0924-0136(03)00760-X
  5. Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A., and Popov, K., "Micro-EDM-recent developments and research issues," Journal of Materials Processing Technology, Vol. 149, No. 1, pp. 50-57, 2004. https://doi.org/10.1016/j.jmatprotec.2004.02.008
  6. Kim, S. H., Lim, H. S., "Development of Micro Milling EDM and Analysis of Machined Characteristics," Journal of The Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 1-7, 2011.
  7. Chou, S. H., and Wang, A. C., "Investigating and removing the re-sticky debris on tungsten carbide in electrical discharge machining," The International Journal of Advanced Manufacturing Technology, Vol. 71, No. 5-8, pp. 1151-1158, 2014. https://doi.org/10.1007/s00170-013-5556-y
  8. Jia, Y., Kim, B. S., Hu, D. J., and Ni, J., "Experimental investigations into near-dry milling EDM of Stellite alloys," International Journal of Machining and Machinability of Materials, Vol. 7, No. 1-2, pp. 96-111, 2009.
  9. Lin, G., Wansheng, Z., Zhihua, Z., and Xiaoming, K., "Mist-jetting-ED-milling and its mechanism," Electromachining & Mould, Vol. 2, 2006.
  10. Kao, C. C., Tao, J., and Shih, A. J., "Near dry electrical discharge machining," International Journal of Machine Tools and Manufacture, Vol. 47, No. 15, pp. 2273-2281, 2007. https://doi.org/10.1016/j.ijmachtools.2007.06.001
  11. Kunleda, M., Miyoshi, Y., Takaya, T., Nakajima, N., ZhanBo, Y., and Yoshida, M., "High speed 3D milling by dry EDM," CIRP Annals-Manufacturing Technology, Vol. 52, No. 1, pp. 147-150, 2003. https://doi.org/10.1016/S0007-8506(07)60552-6
  12. Byiringiro, J. B., Kim, M. Y., and Ko, T. J., "Process modeling of hybrid machining system consisted of electro discharge machining and end milling," The International Journal of Advanced Manufacturing Technology, Vol. 61, No. 9-12, pp. 1247-1254, 2012. https://doi.org/10.1007/s00170-012-4089-0

피인용 문헌

  1. Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review vol.33, pp.14, 2018, https://doi.org/10.1080/10426914.2018.1453144
  2. Analysis of Size Effect of Nano Scale Machining Based on Normal Stress and Indentation Theories vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.001
  3. A Study on Surface Roughness in Circular Pocket Machining of SCM415 Steel vol.18, pp.7, 2019, https://doi.org/10.14775/ksmpe.2019.18.7.077